Call 0800 088 6248

County Down · Northern Ireland

Frameless Glass in County Down

Is your glass entrance door in County Down dropping, dragging or slamming shut? We can check the floor spring and fittings, adjust them, or quote for a replacement door.

  • Guide from £795
  • 11 towns covered
  • Postcode areas BT

Get your free quote

Start with your postcode. A glazier will be in touch to arrange a free survey.

By sending this form you agree we can contact you about this enquiry. See our privacy policy for how we use your details.

No obligation. Prefer to talk? Call 0800 088 6248 or WhatsApp us.

Toughened glass door in County Down: what to know

Frameless glass doors are usually made from 10mm or 12mm toughened safety glass, with the thickness chosen to suit the door height and its hardware. With no frame, the glass itself carries the hinges, handles and locks, so every fitting is specified together with the glass.

Toughened glass cannot be cut, drilled or notched once it has been toughened. Holes for patch fittings, cut-outs for locks and handles, and any shaped corners are all made before toughening, which is why we template the opening first and the glass is made to order rather than cut on site.

A frameless door hangs on one of three main hardware types. Patch fittings clamp to the corners and pivot on a floor spring or top pivot, glass-to-wall hinges suit lighter internal doors, and sliding gear runs the panel along a track fixed above the opening.

A floor spring sits in a steel box set into the floor below the door, controlling closing speed and hold-open. It needs a recess cut into the screed, so it is far simpler to plan before tiles, stone or timber flooring are laid than to retrofit later.

Frameless glass doors and screens at an office reception

Towns we cover for frameless glass in County Down

Choose your town for local details, nearby areas and the postcode districts we cover.

What applies in County Down

Technical Booklet V covers safety glazing in Northern Ireland, including glass in and around doors and low-level glazing where people could walk into it.

For shops and other non-domestic buildings in Northern Ireland, Technical Booklet R covers access, and large glazed areas should be clearly marked.

County Down has its own coastline, so for homes and businesses near the sea, salt air and wind-driven rain are part of the brief. External frameless entrances near the sea face salt spray on patch fittings, pivots and floor spring covers, which can mark or pit finishes over time. Hardware suited to exposed sites, and rinsing fittings during routine cleaning, help them stay smooth and presentable.

Older cottages and farmhouses rarely have square openings or level floors, so templating matters even more for frameless glass. Floors may also lack the depth for a floor spring, in which case top-hung sliding gear or wall hinges can suit better.

Guide prices

Guide prices inc VAT for typical jobs. Remote and island locations are quoted by arrangement. Your written quote fixes the price after measuring.
Typical jobGuide price inc VAT
Frameless glass door with fittings£1,295 – £1,895
Door with fixed side screen£2,195 – £3,195
Fixed frameless screen, about 2 m²£795 – £1,095

Choosing your frameless glass

Pivot door with patches

Corner patch fittings with a floor spring or pivot, the usual choice for shop and office entrances and wide internal doors that need controlled closing.

Glass-to-wall hinged door

Hinges clamp the glass directly to a wall or fixed glass panel. Suits lighter internal doors where there is no room for a floor spring.

Frameless sliding door

A glass panel running on top-hung sliding gear across the opening, saving floor space where a swinging door would get in the way.

Fixed glass screen

A non-opening panel held in slim channels or clamps, used to divide rooms, line stairs or form a side panel beside a glass door.

Frameless Glass in County Down: questions

How long does it take to get a frameless glass door fitted?

Once the opening is templated, the glass is made to order and toughened, which usually takes a few weeks. Fitting a single door or screen is normally done in a day, while larger entrances or runs of screens take longer. Your written quote sets out the expected programme, and we confirm the date when the glass is ready.

How do I look after a frameless glass door?

Clean the glass with a soft cloth and a non-abrasive glass cleaner, and wipe metal fittings with a damp cloth rather than harsh chemicals. Do not hang anything from the door or let it slam against a stop. If the door starts closing too hard or drops out of line, the floor spring or pivots can be adjusted before wear sets in.

What thickness of glass is used for frameless glass doors?

Frameless doors usually use 10mm or 12mm toughened safety glass. The thicker glass is generally used for taller or wider doors and for busy commercial entrances, while 10mm often suits internal doors in homes. The hardware maker's limits for panel weight and size also guide the choice, and we confirm the thickness in your written quote.

Can a frameless glass door be locked?

Yes. A patch lock at the bottom of the door shoots a bolt into a keep in the floor, and a centre lock can join a pair of doors. A glass door does not offer the same resistance as a solid door, so for external entrances you may also want shutters, an alarm or laminated security glass in adjoining screens.

Which parts of County Down do you cover for frameless glass?

We cover the whole of County Down, including Bangor (County Down), Castlereagh, Newtownards, Newry and Banbridge, and postcode areas BT. Building rules for frameless glass here follow the regulations for Northern Ireland. Enter your postcode on the quote form and we will confirm cover; then a glazier will arrange a free survey before giving you a written quote.

Get a written quote in County Down

Free survey for new glazing, clear guide prices and one point of contact for every glazing job.

CallGet a quote