County Down · Northern Ireland
Glass Splashbacks in County Down
Our glaziers fit back-painted glass splashbacks in County Down, using low-iron glass for pale colours so whites and creams look true to the sample you chose.
- Guide from £225
- 11 towns covered
- Postcode areas BT
About glass splashback behind hob in County Down
Splashbacks are templated once the worktops, units and hob are fitted, not from kitchen plans. Worktop heights, wall angles and socket positions often move during installation, and the glass is made to the finished dimensions so edges line up and gaps stay even.
Glass splashbacks have no grout lines to stain, so cleaning is simply a soft cloth with warm soapy water or a non-abrasive glass cleaner. Avoid scourers, abrasive creams and sharp scrapers, which can scratch the glass surface and dull the finish over time.
Long runs and tall walls are usually made from more than one panel, because large sheets are heavy and hard to carry through houses. Joints are planned at corners, behind the hob centre line or at natural breaks, and are finished with a thin, neat silicone line.
Splashbacks are made from toughened glass because it copes with heat from a hob and with the stress around socket cut-outs far better than ordinary glass. Untoughened coloured glass is more prone to cracking behind a hob or across a cut-out, so we only fit toughened panels.
Towns we cover for glass splashbacks in County Down
Choose your town for local details, nearby areas and the postcode districts we cover.
What applies in County Down
Building regulations do not usually apply to this type of work, but we confirm anything that does in writing with your quote.
County Down has its own coastline, so for homes and businesses near the sea, salt air and wind-driven rain are part of the brief. Splashbacks sit indoors, so the coast affects them little, but kitchens in damp coastal homes can see condensation on cold external walls. The wall needs to be dry and sound before bonding, and good extraction helps keep edges and silicone clean.
Older rural homes often have uneven solid walls with lime plaster or stone, so the wall may need making flat before glass can be bonded. Where a range cooker is fitted, its heat and clearance needs are checked before ordering.
Guide prices
| Typical job | Guide price inc VAT |
|---|---|
| Hob splashback, 900 × 750 mm | £225 – £285 |
| Run behind worktop, 2400 × 600 mm | £395 – £515 |
| Low-iron, 900 × 750 mm | £235 – £295 |
Choosing your glass splashbacks
Clear glass panel
Unpainted toughened glass over a painted wall or feature finish, protecting it from splashes while letting the surface behind show.
Metallic or sparkle finish
Back-painted glass with metallic or fine sparkle effects, adding depth and reflection without the upkeep of polished metal.
Back-painted colour
Toughened glass painted on the back in a matched colour, giving a smooth, glossy finish in almost any shade to suit units or walls.
Low-iron glass
Glass with less iron, removing the green tint of standard glass so whites, creams and pale colours look true to the sample.
Glass Splashbacks in County Down: questions
How long does it take to get a glass splashback fitted?
After templating, made-to-measure splashbacks are usually ready within a few weeks, depending on the colour and finish. Fitting a typical kitchen takes part of a day, and you can normally use the kitchen again once we have finished. The silicone needs time to cure fully, and we tell you how long on the day.
Can a glass splashback be fitted over existing tiles?
It is usually better to remove the tiles and make the wall good first. Glass needs a flat, sound surface for the adhesive to bond evenly, and grout lines, uneven tiles or loose tiles can show through or create stress points. Removing tiles also stops the glass standing too far forward of the worktop and sockets.
Can a glass splashback go behind a hob?
Yes, provided it is toughened glass and the hob maker's clearances are followed. Toughened glass copes with the heat from a hob far better than ordinary glass, and it is what we fit behind cookers. Some gas hobs need a minimum gap to the wall, so we check your hob's instructions before the glass is ordered.
Can I fit a glass splashback myself?
It is possible, but the risks are mostly in measuring and handling. A small error in templating or a socket position means the toughened panel has to be remade, because it cannot be trimmed. Large panels are heavy and awkward to place without damaging worktops, and the adhesive must suit the painted back. We measure, make and fit as one job.
Which parts of County Down do you cover for glass splashbacks?
We cover the whole of County Down, including Bangor (County Down), Castlereagh, Newtownards, Newry and Banbridge, and postcode areas BT. Building rules for glass splashbacks here follow the regulations for Northern Ireland. Enter your postcode on the quote form and we will confirm cover; then a glazier will arrange a free survey before giving you a written quote.
Other glazing services in County Down
- Replacement Glass in County Down
- Misted Glass Repair in County Down
- Emergency Glazing in County Down
- Safety Glass in County Down
- Window Repairs in County Down
- Window Film in County Down
- uPVC Windows in County Down
- Aluminium Windows in County Down
- Sash Windows in County Down
- Composite Doors in County Down
- Bifold Doors in County Down
- Sliding Doors in County Down
- Secondary Glazing in County Down
- Roof Lanterns in County Down
- Glass Balustrades in County Down
- Frameless Glass in County Down
- Shower Screens in County Down
- Bespoke Mirrors in County Down
- Glass Roofs in County Down
- Shopfront Glazing in County Down
- Curtain Walling in County Down
- Glass Partitions in County Down
- Property Glazing in County Down
All glazing in County Down · Glass Splashbacks across the UK
Get a written quote in County Down
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.