Totton · Hampshire
Frameless Glass in Totton
We cover Totton and Hampshire for frameless glass doors and screens, from internal room dividers to shop entrances, with every job surveyed and quoted in writing first.
- SO40
- Guide from £795
Totton: glass entrance doors
Toughened glass cannot be cut, drilled or notched once it has been toughened. Holes for patch fittings, cut-outs for locks and handles, and any shaped corners are all made before toughening, which is why we template the opening first and the glass is made to order rather than cut on site.
Fixed glass screens are held in slim channels or clamps at the floor, walls and ceiling, and the head fixing needs something solid to bite into. Walls and ceilings are rarely perfectly square, so templating records the true shape and the glass is made to follow it, keeping gaps even.
A frameless door hangs on one of three main hardware types. Patch fittings clamp to the corners and pivot on a floor spring or top pivot, glass-to-wall hinges suit lighter internal doors, and sliding gear runs the panel along a track fixed above the opening.
Frameless doors run with small gaps at the edges and under the door, so they do not seal against sound or draughts the way a framed, gasketed door does. Clear seal strips can reduce the gaps, but where privacy or noise matters, an acoustic framed system may suit better.
What a typical job includes
- Manifestation where needed, final clean and care advice
- Survey of the opening, floor and fixing points
- Hinges, patch fittings, floor spring or sliding gear
- Fitting, alignment and adjustment of closing speed
About Totton for this job
- Postcodes covered
- SO40 and the surrounding area, including Southampton, Hythe and Eastleigh
- Coast
- Totton is about 5 km from the coast or a tidal estuary, so salt air and wind-driven rain are worth planning for. External frameless entrances near the sea face salt spray on patch fittings, pivots and floor spring covers, which can mark or pit finishes over time. Hardware suited to exposed sites, and rinsing fittings during routine cleaning, help them stay smooth and presentable.
- Daylight and sun
- In Totton the midwinter sun reaches about 16° above the horizon at noon, with roughly 7.7 hours of daylight, rising to about 62° and 16.3 hours in midsummer. Clear frameless doors and screens pass daylight deep into hallways and inner rooms. Where a screen faces low winter sun, glare and reflections can be strong, so satin bands or tinted glass can help, while low-iron glass keeps pale colours true.
- Access and setting
- Older cottages and farmhouses rarely have square openings or level floors, so templating matters even more for frameless glass. Floors may also lack the depth for a floor spring, in which case top-hung sliding gear or wall hinges can suit better.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Totton
| Typical job | Guide price inc VAT |
|---|---|
| Frameless glass door with fittings | £1,295 – £1,895 |
| Door with fixed side screen | £2,195 – £3,195 |
| Fixed frameless screen, about 2 m² | £795 – £1,095 |
Get a guide price for your size
For shops and other non-domestic buildings in England, Approved Document M covers accessible entrances, and Approved Document K requires large areas of glass that people could walk into to carry manifestation (visible markings).
Options to choose between
Satin or patterned glass
Acid-etched, sandblasted-effect or patterned glass that gives privacy while still passing light, available as full panels or as bands.
Hardware finishes
Patch fittings, handles and hinges in satin or polished stainless steel, black or other finishes to match the room or shopfront.
Pivot door with patches
Corner patch fittings with a floor spring or pivot, the usual choice for shop and office entrances and wide internal doors that need controlled closing.
Frameless Glass in Totton: questions
What happens if a frameless glass door breaks?
Toughened glass breaks into small, blunt pieces rather than large shards, so the door will need to be fully replaced rather than repaired. We can make the opening safe and secure in the meantime, then remake the panel from the original measurements or a fresh template, with holes and cut-outs formed before toughening.
What affects the cost of frameless glass doors and screens?
The main cost drivers are panel size and thickness, the number of panels, the hardware type, and whether a floor spring needs a recess cutting into an existing floor. Satin or low-iron glass, special hardware finishes and difficult access also add cost. See the guide prices for typical ranges, and the written quote fixes the price for your specification.
Do glass doors and screens need markings on them?
In buildings other than dwellings in England, large clear glass that people could walk into needs manifestation at two heights, 850–1000mm and 1400–1600mm from the floor. Workplace rules across Great Britain also require glass to be made apparent where needed. Homes are not covered by the manifestation guidance, though a frosted band can still be sensible.
Can a frameless glass door be locked?
Yes. A patch lock at the bottom of the door shoots a bolt into a keep in the floor, and a centre lock can join a pair of doors. A glass door does not offer the same resistance as a solid door, so for external entrances you may also want shutters, an alarm or laminated security glass in adjoining screens.
Do you cover Totton for frameless glass?
Yes. We can quote for frameless glass across Totton and the surrounding Hampshire area, including postcode districts SO40, and nearby Southampton, Hythe and Eastleigh. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Totton
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.