Wellington · Shropshire
Frameless Glass in Wellington
We cover Wellington and Shropshire for frameless glass doors and screens, from internal room dividers to shop entrances, with every job surveyed and quoted in writing first.
- TF1
- TF5
- Guide from £795
Toughened glass door across Wellington
A frameless door hangs on one of three main hardware types. Patch fittings clamp to the corners and pivot on a floor spring or top pivot, glass-to-wall hinges suit lighter internal doors, and sliding gear runs the panel along a track fixed above the opening.
In England, Approved Document K treats glazing in a door within 1500mm of the floor, glazing within 300mm of a door edge and within 1500mm of the floor, and other glazing within 800mm of the floor as critical locations. Glass in these positions must break safely or be suitably protected.
The guidance in England asks for glass meeting Class 3 of BS EN 12600 in most critical locations, and the higher Class 2 where a door or door side panel is more than 900mm wide. Toughened glass for doors is made to suit, and Wales, Scotland and Northern Ireland have their own guidance.
Frameless glass doors are usually made from 10mm or 12mm toughened safety glass, with the thickness chosen to suit the door height and its hardware. With no frame, the glass itself carries the hinges, handles and locks, so every fitting is specified together with the glass.
What's included
- Manifestation where needed, final clean and care advice
- Holes and cut-outs made at the factory before toughening
- Fitting, alignment and adjustment of closing speed
- Templating for made-to-measure toughened glass
About Wellington for this job
- Postcodes covered
- TF1, TF5 and the surrounding area, including Telford, Shrewsbury and Bridgnorth
- Coast
- Wellington is well inland, around 70 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Wellington the midwinter sun reaches about 14° above the horizon at noon, with roughly 7.4 hours of daylight, rising to about 61° and 16.6 hours in midsummer. Clear frameless doors and screens pass daylight deep into hallways and inner rooms. Where a screen faces low winter sun, glare and reflections can be strong, so satin bands or tinted glass can help, while low-iron glass keeps pale colours true.
- Access and setting
- Older cottages and farmhouses rarely have square openings or level floors, so templating matters even more for frameless glass. Floors may also lack the depth for a floor spring, in which case top-hung sliding gear or wall hinges can suit better.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Wellington
| Typical job | Guide price inc VAT |
|---|---|
| Frameless glass door with fittings | £1,295 – £1,895 |
| Door with fixed side screen | £2,195 – £3,195 |
| Fixed frameless screen, about 2 m² | £795 – £1,095 |
Get a guide price for your size
For shops and other non-domestic buildings in England, Approved Document M covers accessible entrances, and Approved Document K requires large areas of glass that people could walk into to carry manifestation (visible markings).
Choosing your frameless glass
Glass-to-wall hinged door
Hinges clamp the glass directly to a wall or fixed glass panel. Suits lighter internal doors where there is no room for a floor spring.
Low-iron glass
Glass with less iron, removing the green tint seen on the edges of standard glass, so thick panels look clearer and colours stay true.
Satin or patterned glass
Acid-etched, sandblasted-effect or patterned glass that gives privacy while still passing light, available as full panels or as bands.
Frameless Glass in Wellington: questions
What affects the cost of frameless glass doors and screens?
The main cost drivers are panel size and thickness, the number of panels, the hardware type, and whether a floor spring needs a recess cutting into an existing floor. Satin or low-iron glass, special hardware finishes and difficult access also add cost. See the guide prices for typical ranges, and the written quote fixes the price for your specification.
Can a frameless glass door be fitted into my existing doorway?
Usually, yes. We survey the opening to check the head and walls can take the fixings, and template it so the glass follows any out-of-square edges. A floor spring needs a recess in the floor, so where that is not practical we may suggest a top pivot, wall hinges or sliding gear instead. Some making good of plaster may be needed.
Do glass doors and screens need markings on them?
In buildings other than dwellings in England, large clear glass that people could walk into needs manifestation at two heights, 850–1000mm and 1400–1600mm from the floor. Workplace rules across Great Britain also require glass to be made apparent where needed. Homes are not covered by the manifestation guidance, though a frosted band can still be sensible.
How do I look after a frameless glass door?
Clean the glass with a soft cloth and a non-abrasive glass cleaner, and wipe metal fittings with a damp cloth rather than harsh chemicals. Do not hang anything from the door or let it slam against a stop. If the door starts closing too hard or drops out of line, the floor spring or pivots can be adjusted before wear sets in.
Do you cover Wellington for frameless glass?
Yes. We can quote for frameless glass across Wellington and the surrounding Shropshire area, including postcode districts TF1 and TF5, and nearby Telford, Shrewsbury and Bridgnorth. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Wellington
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.