Shrewsbury · Shropshire
Frameless Glass in Shrewsbury
Looking for frameless glass doors in Shrewsbury? Our glaziers can survey your opening and quote for toughened glass on patch fittings, wall hinges or sliding gear, made to measure.
- SY1
- SY2
- SY3
- Guide from £795
Glass entrance doors across Shrewsbury
A frameless door hangs on one of three main hardware types. Patch fittings clamp to the corners and pivot on a floor spring or top pivot, glass-to-wall hinges suit lighter internal doors, and sliding gear runs the panel along a track fixed above the opening.
In workplaces in England, Wales and Scotland, the Workplace (Health, Safety and Welfare) Regulations 1992 require glass in doors, walls and partitions to be of safety material or protected where needed for safety, and to be marked or otherwise made apparent so people notice it.
Toughened glass can very occasionally break on its own because of nickel sulphide inclusions. Heat soak testing to BS EN 14179 reduces that risk by breaking flawed panels in the factory before delivery, though it cannot remove the risk entirely. It is often specified for large doors and screens in busy buildings.
In England, Approved Document K treats glazing in a door within 1500mm of the floor, glazing within 300mm of a door edge and within 1500mm of the floor, and other glazing within 800mm of the floor as critical locations. Glass in these positions must break safely or be suitably protected.
What's included
- Fitting, alignment and adjustment of closing speed
- Templating for made-to-measure toughened glass
- Survey of the opening, floor and fixing points
- Holes and cut-outs made at the factory before toughening
About Shrewsbury for this job
- Postcodes covered
- SY1, SY2, SY3 and the surrounding area, including Wellington, Telford and Oswestry
- Coast
- Shrewsbury is well inland, around 64 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Shrewsbury the midwinter sun reaches about 14° above the horizon at noon, with roughly 7.4 hours of daylight, rising to about 61° and 16.6 hours in midsummer. Clear frameless doors and screens pass daylight deep into hallways and inner rooms. Where a screen faces low winter sun, glare and reflections can be strong, so satin bands or tinted glass can help, while low-iron glass keeps pale colours true.
- Access and setting
- Large glass panels for city shops, offices and flats can need a planned delivery, a team to carry them, and sometimes a lift or crane booking. Access through communal areas, loading limits and permitted working hours all affect the fitting day.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Shrewsbury
| Typical job | Guide price inc VAT |
|---|---|
| Frameless glass door with fittings | £1,295 – £1,895 |
| Door with fixed side screen | £2,195 – £3,195 |
| Fixed frameless screen, about 2 m² | £795 – £1,095 |
Get a guide price for your size
For shops and other non-domestic buildings in England, Approved Document M covers accessible entrances, and Approved Document K requires large areas of glass that people could walk into to carry manifestation (visible markings).
Options to choose between
Fixed glass screen
A non-opening panel held in slim channels or clamps, used to divide rooms, line stairs or form a side panel beside a glass door.
Glass-to-wall hinged door
Hinges clamp the glass directly to a wall or fixed glass panel. Suits lighter internal doors where there is no room for a floor spring.
Frameless sliding door
A glass panel running on top-hung sliding gear across the opening, saving floor space where a swinging door would get in the way.
Frameless Glass in Shrewsbury: questions
Can a frameless glass door be fitted into my existing doorway?
Usually, yes. We survey the opening to check the head and walls can take the fixings, and template it so the glass follows any out-of-square edges. A floor spring needs a recess in the floor, so where that is not practical we may suggest a top pivot, wall hinges or sliding gear instead. Some making good of plaster may be needed.
Do frameless glass doors have to be safety glass?
Yes. Glass in doors is a critical location, so in England it must meet the impact requirements in Approved Document K, and frameless doors are made from toughened safety glass to suit. Toughened glass also lets the door carry its own hinges and handles. Other UK nations have equivalent guidance, and we specify the glass to suit where you are.
How do I look after a frameless glass door?
Clean the glass with a soft cloth and a non-abrasive glass cleaner, and wipe metal fittings with a damp cloth rather than harsh chemicals. Do not hang anything from the door or let it slam against a stop. If the door starts closing too hard or drops out of line, the floor spring or pivots can be adjusted before wear sets in.
What thickness of glass is used for frameless glass doors?
Frameless doors usually use 10mm or 12mm toughened safety glass. The thicker glass is generally used for taller or wider doors and for busy commercial entrances, while 10mm often suits internal doors in homes. The hardware maker's limits for panel weight and size also guide the choice, and we confirm the thickness in your written quote.
Do you cover Shrewsbury for frameless glass?
Yes. We can quote for frameless glass across Shrewsbury and the surrounding Shropshire area, including postcode districts SY1, SY2 and SY3, and nearby Wellington, Telford and Oswestry. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Shrewsbury
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.