Andover · Hampshire
Glass Balustrades in Andover
Glass balustrades in Andover start with a survey of the drop, the structure and how the space is used, followed by a written quote that fixes the price for the specification shown.
- SP10
- Guide from £1,095
About frameless glass balustrade in Andover
Toughened glass can occasionally break without impact because of tiny nickel sulphide inclusions. Heat soak testing to BS EN 14179 reduces that risk by breaking flawed panels in the factory, but it does not remove it entirely, which is one more reason laminated glass is used in guarding.
BS 6180, the code of practice for barriers, says a handrail should be used where glass guards a drop of more than 600mm, unless the glass is laminated toughened glass that would stay in place if a panel failed. That is why frameless balustrades without a top rail use laminated glass.
In England, Approved Document K sets minimum guarding heights. In a single-family home, stairs, landings and internal floor edges need at least 900mm, while external balconies, Juliet balconies and roof edges need at least 1100mm. Wales, Scotland and Northern Ireland publish their own guidance, so we check the figure that applies.
The interlayer inside laminated glass decides how a broken panel behaves. Standard PVB holds the fragments together but can let a fully broken panel sag, while stiffer structural interlayers help it stay upright. The right choice depends on whether a handrail is fitted and how exposed the balustrade is.
Included as standard
- Final clean, film removal and care advice
- Toughened or laminated safety glass to the agreed specification
- Fitting, levelling and alignment of every panel
- Templating and measuring for made-to-measure glass panels
Local details for Andover
- Postcodes covered
- SP10 and the surrounding area, including Winchester, Newbury and Salisbury
- Coast
- Andover is well inland, around 35 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Andover the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. Glass guarding on a sunny balcony brings in heat and glare as well as the view. Tinted or satin glass can soften low winter sun on a terrace, while low-iron glass keeps colours true on north-facing spaces where every bit of daylight counts.
- Access and setting
- Older rural homes often have uneven floors, timber structures and stone walls, all of which affect how channels and posts are fixed. Exposed decks and hillside terraces also face strong wind, so the glass and fixing system are chosen for that exposure.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Andover
| Typical job | Guide price inc VAT |
|---|---|
| Frameless, 3 m run | £1,095 – £1,395 |
| Frameless, 6 m run | £2,195 – £2,795 |
| Post and clamp, 6 m run | £1,395 – £1,695 |
Get a guide price for your size
Approved Document K sets minimum guarding heights in England, typically 900 mm for internal stairs and landings and 1100 mm for balconies and external edges of homes. Glass guarding must be designed to resist the loads set out in BS 6180 and the loading standards it refers to.
Options to choose between
Tinted or satin glass
Grey, bronze or satin-etched glass that adds privacy or cuts glare on balconies and terraces overlooked by neighbours or streets.
Spigot fixed
Individual spigots hold each panel at its base instead of a continuous channel. Common on decking, around pools and in gardens.
Post and clamp
Glass panels clamped between stainless steel or powder-coated posts. Often uses thinner glass and suits long runs, decking and simpler budgets.
Glass Balustrades in Andover: questions
How thick does the glass in a balustrade need to be?
Glass thickness depends on the fixing system, the panel height and the load the barrier must resist, so there is no single answer. Frameless channel systems commonly use thick laminated toughened glass, such as 21.5mm, while post and clamp systems often use thinner glass. The system maker's tested data sets the minimum, and we specify from that.
What happens if a balustrade panel breaks?
With laminated glass, the broken panel is held together by its interlayer and should stay in place until it is replaced. With toughened-only glass, the panel breaks into small pieces and the handrail becomes the barrier. Either way, keep people away from the edge and contact us so we can make the area safe and remake the panel to size.
Can a glass balustrade be fitted to timber decking?
Yes, but the deck frame usually needs strengthening first. Glass guarding puts significant load into its fixings, and ordinary deck joists are not designed to take it. We check the frame at survey and may recommend steel brackets, extra blocking, or a post or spigot system instead of a long continuous channel.
What affects the cost of a glass balustrade?
The main cost drivers are the length of the run, the number of panels and corners, the glass thickness and interlayer, and the fixing system. A top handrail, low-iron or tinted glass, special hardware finishes and difficult access all add to the price. See the guide prices for typical ranges, and your written quote fixes the price for the specification shown.
Do you cover Andover for glass balustrades?
Yes. We can quote for glass balustrades across Andover and the surrounding Hampshire area, including postcode districts SP10, and nearby Winchester, Newbury and Salisbury. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Andover
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.