Farnborough · Hampshire
Glass Balustrades in Farnborough
Our glaziers fit glass balustrades for homes and commercial buildings in Farnborough, using laminated toughened glass for frameless runs and matching rails and fittings to the space.
- GU14
- Guide from £1,095
Glass stair balustrade in Farnborough
A frameless channel only performs as well as the structure it is bolted into. Channels need a solid base such as concrete or steel, and timber decks or floor joists often need extra steelwork or blocking. Checking the substrate at survey stage avoids panels that flex or loosen under load.
The fixing style changes both the look and the work involved. Recessed channels sit flush with the floor and need planning before the floor finish goes down, surface channels sit on top with a cover strip, and side-fixed systems bolt to the face of a slab or stair to keep floor space clear.
Glass guarding must resist the horizontal loads set for how the space is used, and those loads rise from a private home to offices, shops and busy public areas. Glass thickness, fixing system and anchors are matched to that load, so a system suited to a house stair may not suit a bar terrace.
BS 6180, the code of practice for barriers, says a handrail should be used where glass guards a drop of more than 600mm, unless the glass is laminated toughened glass that would stay in place if a panel failed. That is why frameless balustrades without a top rail use laminated glass.
What's included
- Final clean, film removal and care advice
- Toughened or laminated safety glass to the agreed specification
- Channels, clamps, posts or spigots in your chosen finish
- Site survey, including a check of the structure behind fixings
Working in Farnborough
- Postcodes covered
- GU14 and the surrounding area, including Camberley, Aldershot and Fleet
- Coast
- Farnborough is well inland, around 51 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Farnborough the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. Glass guarding on a sunny balcony brings in heat and glare as well as the view. Tinted or satin glass can soften low winter sun on a terrace, while low-iron glass keeps colours true on north-facing spaces where every bit of daylight counts.
- Access and setting
- Flats and town houses often mean carrying long panels through stairwells or lifting them by hand to upper balconies, so panels may need splitting. Parking and loading limits, building management rules and leaseholder consents can all affect when we fit.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Farnborough
| Typical job | Guide price inc VAT |
|---|---|
| Frameless, 3 m run | £1,095 – £1,395 |
| Frameless, 6 m run | £2,195 – £2,795 |
| Post and clamp, 6 m run | £1,395 – £1,695 |
Get a guide price for your size
Approved Document K sets minimum guarding heights in England, typically 900 mm for internal stairs and landings and 1100 mm for balconies and external edges of homes. Glass guarding must be designed to resist the loads set out in BS 6180 and the loading standards it refers to.
Specification choices
Side-fixed standoffs
Glass fixed to the face of a slab, stair stringer or balcony edge with round standoffs through drilled holes, keeping the walking surface completely clear.
Frameless channel system
Laminated toughened glass held in a continuous floor channel, giving a clean edge with no posts. Suits balconies, terraces, decks and modern stairs.
Tinted or satin glass
Grey, bronze or satin-etched glass that adds privacy or cuts glare on balconies and terraces overlooked by neighbours or streets.
Glass Balustrades in Farnborough: questions
Can I fit a glass balustrade kit myself?
Kits are sold for self-fitting, but a balustrade's safety depends on the right anchors, a sound substrate, the correct glass for the system and accurate alignment. Fixing into weak timber or using toughened-only glass in a frameless channel can leave a barrier that fails under load. We supply and fit as one job and check each fixing before handover.
How thick does the glass in a balustrade need to be?
Glass thickness depends on the fixing system, the panel height and the load the barrier must resist, so there is no single answer. Frameless channel systems commonly use thick laminated toughened glass, such as 21.5mm, while post and clamp systems often use thinner glass. The system maker's tested data sets the minimum, and we specify from that.
How high does a glass balustrade have to be?
In England, the minimum height in a single-family home is 900mm for stairs, landings and internal floor edges, and 1100mm for external balconies, Juliet balconies and roof edges. Other building types have their own heights in the same guidance. Wales, Scotland and Northern Ireland publish separate guidance, so we confirm the figure that applies to your property.
Is outdoor balustrade glass hard to keep clean?
Outdoor glass collects rain marks, pollen and dust, so expect to clean it about as often as your windows. A soft cloth, warm water and a non-abrasive cleaner are enough. Avoid scouring pads and harsh chemicals on both the glass and the stainless or powder-coated fittings, and rinse grit and salt out of channels.
Do you cover Farnborough for glass balustrades?
Yes. We can quote for glass balustrades across Farnborough and the surrounding Hampshire area, including postcode districts GU14, and nearby Camberley, Aldershot and Fleet. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
More glazing in Farnborough
Glass Balustrades nearby
Get a written quote in Farnborough
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.