Aldershot · Hampshire
Glass Balustrades in Aldershot
We cover Aldershot and Hampshire for glass balustrades, from frameless balcony guarding to glass stair panels, with every job surveyed and quoted in writing before any glass is ordered.
- GU11
- Guide from £1,095
Aldershot: glass balustrades
BS 6180, the code of practice for barriers, says a handrail should be used where glass guards a drop of more than 600mm, unless the glass is laminated toughened glass that would stay in place if a panel failed. That is why frameless balustrades without a top rail use laminated glass.
Toughened glass can occasionally break without impact because of tiny nickel sulphide inclusions. Heat soak testing to BS EN 14179 reduces that risk by breaking flawed panels in the factory, but it does not remove it entirely, which is one more reason laminated glass is used in guarding.
Glass guarding must resist the horizontal loads set for how the space is used, and those loads rise from a private home to offices, shops and busy public areas. Glass thickness, fixing system and anchors are matched to that load, so a system suited to a house stair may not suit a bar terrace.
Where a building may be used by children under five, the guidance in England says guarding should not let a 100mm sphere pass through any opening and should not be easy to climb. Solid glass helps on both counts, but gaps between panels, posts, walls and the floor still need checking.
Included as standard
- Templating and measuring for made-to-measure glass panels
- Fitting, levelling and alignment of every panel
- Channels, clamps, posts or spigots in your chosen finish
- Toughened or laminated safety glass to the agreed specification
About Aldershot for this job
- Postcodes covered
- GU11 and the surrounding area, including Farnham, Farnborough and Fleet
- Coast
- Aldershot is well inland, around 46 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Aldershot the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. Glass guarding on a sunny balcony brings in heat and glare as well as the view. Tinted or satin glass can soften low winter sun on a terrace, while low-iron glass keeps colours true on north-facing spaces where every bit of daylight counts.
- Access and setting
- Older rural homes often have uneven floors, timber structures and stone walls, all of which affect how channels and posts are fixed. Exposed decks and hillside terraces also face strong wind, so the glass and fixing system are chosen for that exposure.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Aldershot
| Typical job | Guide price inc VAT |
|---|---|
| Frameless, 3 m run | £1,095 – £1,395 |
| Frameless, 6 m run | £2,195 – £2,795 |
| Post and clamp, 6 m run | £1,395 – £1,695 |
Get a guide price for your size
Approved Document K sets minimum guarding heights in England, typically 900 mm for internal stairs and landings and 1100 mm for balconies and external edges of homes. Glass guarding must be designed to resist the loads set out in BS 6180 and the loading standards it refers to.
Specification choices
Spigot fixed
Individual spigots hold each panel at its base instead of a continuous channel. Common on decking, around pools and in gardens.
Side-fixed standoffs
Glass fixed to the face of a slab, stair stringer or balcony edge with round standoffs through drilled holes, keeping the walking surface completely clear.
Low-iron glass
Glass with less iron, which removes the green tint seen on the edges of standard glass, most noticeable in thick laminated panels.
Glass Balustrades in Aldershot: questions
How thick does the glass in a balustrade need to be?
Glass thickness depends on the fixing system, the panel height and the load the barrier must resist, so there is no single answer. Frameless channel systems commonly use thick laminated toughened glass, such as 21.5mm, while post and clamp systems often use thinner glass. The system maker's tested data sets the minimum, and we specify from that.
Can a glass balustrade be fitted to timber decking?
Yes, but the deck frame usually needs strengthening first. Glass guarding puts significant load into its fixings, and ordinary deck joists are not designed to take it. We check the frame at survey and may recommend steel brackets, extra blocking, or a post or spigot system instead of a long continuous channel.
What happens if a balustrade panel breaks?
With laminated glass, the broken panel is held together by its interlayer and should stay in place until it is replaced. With toughened-only glass, the panel breaks into small pieces and the handrail becomes the barrier. Either way, keep people away from the edge and contact us so we can make the area safe and remake the panel to size.
What affects the cost of a glass balustrade?
The main cost drivers are the length of the run, the number of panels and corners, the glass thickness and interlayer, and the fixing system. A top handrail, low-iron or tinted glass, special hardware finishes and difficult access all add to the price. See the guide prices for typical ranges, and your written quote fixes the price for the specification shown.
Do you cover Aldershot for glass balustrades?
Yes. We can quote for glass balustrades across Aldershot and the surrounding Hampshire area, including postcode districts GU11, and nearby Farnham, Farnborough and Fleet. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Aldershot
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.