Sevenoaks · Kent
Glass Balustrades in Sevenoaks
From mezzanines to roof terraces, we can quote for glass guarding in Sevenoaks that lets daylight through while giving a firm, compliant barrier at the edge.
- TN13
- Guide from £1,095
Glass balustrade for decking for homes and businesses in Sevenoaks
Where a building may be used by children under five, the guidance in England says guarding should not let a 100mm sphere pass through any opening and should not be easy to climb. Solid glass helps on both counts, but gaps between panels, posts, walls and the floor still need checking.
A frameless channel only performs as well as the structure it is bolted into. Channels need a solid base such as concrete or steel, and timber decks or floor joists often need extra steelwork or blocking. Checking the substrate at survey stage avoids panels that flex or loosen under load.
BS 6180, the code of practice for barriers, says a handrail should be used where glass guards a drop of more than 600mm, unless the glass is laminated toughened glass that would stay in place if a panel failed. That is why frameless balustrades without a top rail use laminated glass.
Toughened glass cannot be cut, drilled or shaped once it has been toughened, so every hole, notch and corner is made before processing. That is why we template on site and order each panel to exact sizes. A panel made to the wrong measurement has to be remade, not trimmed.
What's included
- Templating and measuring for made-to-measure glass panels
- Fitting, levelling and alignment of every panel
- Channels, clamps, posts or spigots in your chosen finish
- Final clean, film removal and care advice
Working in Sevenoaks
- Postcodes covered
- TN13 and the surrounding area, including Tonbridge, Orpington and Swanley
- Coast
- Sevenoaks is well inland, around 23 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Sevenoaks the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. Glass guarding on a sunny balcony brings in heat and glare as well as the view. Tinted or satin glass can soften low winter sun on a terrace, while low-iron glass keeps colours true on north-facing spaces where every bit of daylight counts.
- Access and setting
- Older rural homes often have uneven floors, timber structures and stone walls, all of which affect how channels and posts are fixed. Exposed decks and hillside terraces also face strong wind, so the glass and fixing system are chosen for that exposure.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Sevenoaks
| Typical job | Guide price inc VAT |
|---|---|
| Frameless, 3 m run | £1,095 – £1,395 |
| Frameless, 6 m run | £2,195 – £2,795 |
| Post and clamp, 6 m run | £1,395 – £1,695 |
Get a guide price for your size
Approved Document K sets minimum guarding heights in England, typically 900 mm for internal stairs and landings and 1100 mm for balconies and external edges of homes. Glass guarding must be designed to resist the loads set out in BS 6180 and the loading standards it refers to.
Choosing your glass balustrades
Low-iron glass
Glass with less iron, which removes the green tint seen on the edges of standard glass, most noticeable in thick laminated panels.
Tinted or satin glass
Grey, bronze or satin-etched glass that adds privacy or cuts glare on balconies and terraces overlooked by neighbours or streets.
Frameless channel system
Laminated toughened glass held in a continuous floor channel, giving a clean edge with no posts. Suits balconies, terraces, decks and modern stairs.
Glass Balustrades in Sevenoaks: questions
What happens if a balustrade panel breaks?
With laminated glass, the broken panel is held together by its interlayer and should stay in place until it is replaced. With toughened-only glass, the panel breaks into small pieces and the handrail becomes the barrier. Either way, keep people away from the edge and contact us so we can make the area safe and remake the panel to size.
Can a glass balustrade be fitted to timber decking?
Yes, but the deck frame usually needs strengthening first. Glass guarding puts significant load into its fixings, and ordinary deck joists are not designed to take it. We check the frame at survey and may recommend steel brackets, extra blocking, or a post or spigot system instead of a long continuous channel.
Does a new glass balustrade need building control approval?
New guarding that forms part of wider building work, such as a new balcony, loft conversion or staircase, is normally checked by building control as part of that project. Whether a standalone replacement needs its own application depends on the work and on the nation, because England, Wales, Scotland and Northern Ireland have separate systems. We can advise at survey.
Do glass balustrades need a handrail?
Not always. Under BS 6180, a handrail should be used where the glass guards a drop of more than 600mm, unless laminated toughened glass is used that would stay in place if a panel broke. Frameless systems without a top rail therefore use laminated glass, while toughened-only glass needs a handrail tied across the panels. We confirm which applies to your job at survey.
Do you cover Sevenoaks for glass balustrades?
Yes. We can quote for glass balustrades across Sevenoaks and the surrounding Kent area, including postcode districts TN13, and nearby Tonbridge, Orpington and Swanley. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Sevenoaks
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.