Corby · Northamptonshire
Glass Balustrades in Corby
We cover Corby and Northamptonshire for glass balustrades, from frameless balcony guarding to glass stair panels, with every job surveyed and quoted in writing before any glass is ordered.
- NN17
- NN18
- Guide from £1,095
Glass balustrades in Corby: what to know
BS 6180, the code of practice for barriers, says a handrail should be used where glass guards a drop of more than 600mm, unless the glass is laminated toughened glass that would stay in place if a panel failed. That is why frameless balustrades without a top rail use laminated glass.
Toughened glass cannot be cut, drilled or shaped once it has been toughened, so every hole, notch and corner is made before processing. That is why we template on site and order each panel to exact sizes. A panel made to the wrong measurement has to be remade, not trimmed.
Glass balustrades need little upkeep beyond cleaning with a soft cloth and a non-abrasive glass cleaner. Outdoors, rinse grit and salt from fittings, keep drainage slots in channels clear, and check clamps, spigots and handrail joints once a year for any loosening or movement.
The price depends mainly on the length of the run, the number of panels and corners, glass thickness and interlayer, the fixing system, whether a handrail is fitted and how easy the area is to reach. Low-iron, tinted or satin glass and specialist hardware finishes also add cost. See the guide prices for typical ranges.
Included as standard
- Final clean, film removal and care advice
- Channels, clamps, posts or spigots in your chosen finish
- Toughened or laminated safety glass to the agreed specification
- Site survey, including a check of the structure behind fixings
Corby at a glance
- Postcodes covered
- NN17, NN18 and the surrounding area, including Uppingham, Kettering and Market Harborough
- Coast
- Corby is well inland, around 66 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Corby the midwinter sun reaches about 14° above the horizon at noon, with roughly 7.4 hours of daylight, rising to about 61° and 16.6 hours in midsummer. Glass guarding on a sunny balcony brings in heat and glare as well as the view. Tinted or satin glass can soften low winter sun on a terrace, while low-iron glass keeps colours true on north-facing spaces where every bit of daylight counts.
- Access and setting
- Flats and town houses often mean carrying long panels through stairwells or lifting them by hand to upper balconies, so panels may need splitting. Parking and loading limits, building management rules and leaseholder consents can all affect when we fit.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Corby
| Typical job | Guide price inc VAT |
|---|---|
| Frameless, 3 m run | £1,095 – £1,395 |
| Frameless, 6 m run | £2,195 – £2,795 |
| Post and clamp, 6 m run | £1,395 – £1,695 |
Get a guide price for your size
Approved Document K sets minimum guarding heights in England, typically 900 mm for internal stairs and landings and 1100 mm for balconies and external edges of homes. Glass guarding must be designed to resist the loads set out in BS 6180 and the loading standards it refers to.
Options to choose between
Top handrail
A capping rail along the top edge in stainless steel, aluminium or timber, which ties panels together and gives a firm hand hold.
Post and clamp
Glass panels clamped between stainless steel or powder-coated posts. Often uses thinner glass and suits long runs, decking and simpler budgets.
Side-fixed standoffs
Glass fixed to the face of a slab, stair stringer or balcony edge with round standoffs through drilled holes, keeping the walking surface completely clear.
Glass Balustrades in Corby: questions
Can a glass balustrade be fitted to timber decking?
Yes, but the deck frame usually needs strengthening first. Glass guarding puts significant load into its fixings, and ordinary deck joists are not designed to take it. We check the frame at survey and may recommend steel brackets, extra blocking, or a post or spigot system instead of a long continuous channel.
Does a new glass balustrade need building control approval?
New guarding that forms part of wider building work, such as a new balcony, loft conversion or staircase, is normally checked by building control as part of that project. Whether a standalone replacement needs its own application depends on the work and on the nation, because England, Wales, Scotland and Northern Ireland have separate systems. We can advise at survey.
What happens if a balustrade panel breaks?
With laminated glass, the broken panel is held together by its interlayer and should stay in place until it is replaced. With toughened-only glass, the panel breaks into small pieces and the handrail becomes the barrier. Either way, keep people away from the edge and contact us so we can make the area safe and remake the panel to size.
Can I fit a glass balustrade kit myself?
Kits are sold for self-fitting, but a balustrade's safety depends on the right anchors, a sound substrate, the correct glass for the system and accurate alignment. Fixing into weak timber or using toughened-only glass in a frameless channel can leave a barrier that fails under load. We supply and fit as one job and check each fixing before handover.
Do you cover Corby for glass balustrades?
Yes. We can quote for glass balustrades across Corby and the surrounding Northamptonshire area, including postcode districts NN17 and NN18, and nearby Uppingham, Kettering and Market Harborough. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Corby
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.