Berkshire · England
Glass Splashbacks in Berkshire
Our glaziers fit back-painted glass splashbacks in Berkshire, using low-iron glass for pale colours so whites and creams look true to the sample you chose.
- Guide from £225
- 11 towns covered
- Postcode areas GU, RG, SL
Berkshire: glass splashbacks
Splashbacks are made from toughened glass because it copes with heat from a hob and with the stress around socket cut-outs far better than ordinary glass. Untoughened coloured glass is more prone to cracking behind a hob or across a cut-out, so we only fit toughened panels.
Splashbacks are templated once the worktops, units and hob are fitted, not from kitchen plans. Worktop heights, wall angles and socket positions often move during installation, and the glass is made to the finished dimensions so edges line up and gaps stay even.
Toughened glass cannot be cut or drilled after toughening, so every socket, switch, extractor and window-reveal cut-out is made beforehand. Sockets cannot be moved after the glass is ordered without remaking the panel, so electrical positions need to be final at templating.
After templating, made-to-measure splashbacks are usually ready within a few weeks, depending on colour and finish. Fitting a typical kitchen takes part of a day, and the kitchen can normally be used again straight afterwards, though the silicone needs time to cure fully.
What applies in Berkshire
Building regulations do not usually apply to this type of work, but we confirm anything that does in writing with your quote.
Berkshire is inland, around 56 km from the nearest coast at its closest point, so salt exposure is rarely a factor.
Kitchens in flats and terraces often have narrow access and tight stairs, so long splashbacks may be split into shorter panels with planned joints. Parking for the fitting team and building rules on working hours can also affect scheduling.
Guide prices
| Typical job | Guide price inc VAT |
|---|---|
| Hob splashback, 900 × 750 mm | £225 – £285 |
| Run behind worktop, 2400 × 600 mm | £395 – £515 |
| Low-iron, 900 × 750 mm | £235 – £295 |
Choosing your glass splashbacks
Printed design
A digitally printed image or pattern on the back of the glass, sealed behind it so the front stays smooth and wipeable.
Satin finish
Acid-etched glass with a soft, low-sheen face that reduces reflections and glare, useful opposite windows or bright lighting.
Metallic or sparkle finish
Back-painted glass with metallic or fine sparkle effects, adding depth and reflection without the upkeep of polished metal.
Back-painted colour
Toughened glass painted on the back in a matched colour, giving a smooth, glossy finish in almost any shade to suit units or walls.
Glass Splashbacks in Berkshire: questions
How long does it take to get a glass splashback fitted?
After templating, made-to-measure splashbacks are usually ready within a few weeks, depending on the colour and finish. Fitting a typical kitchen takes part of a day, and you can normally use the kitchen again once we have finished. The silicone needs time to cure fully, and we tell you how long on the day.
How do you match the colour of a glass splashback?
We can match many paint and RAL colours, and the most reliable way to choose is from a physical glass sample viewed in your own kitchen. Colours look different on screens and under different lighting. For pale colours we usually suggest low-iron glass, because standard glass adds a green tint to the painted back.
How do I clean a glass splashback?
Wipe it with a soft cloth and warm soapy water, or a non-abrasive glass cleaner, then buff dry for a streak-free finish. Grease behind the hob comes off easily because there are no grout lines. Avoid scourers, abrasive creams and blades, which can scratch the glass, and do not use cleaners that could seep behind the edges.
Can a glass splashback go behind a hob?
Yes, provided it is toughened glass and the hob maker's clearances are followed. Toughened glass copes with the heat from a hob far better than ordinary glass, and it is what we fit behind cookers. Some gas hobs need a minimum gap to the wall, so we check your hob's instructions before the glass is ordered.
Which parts of Berkshire do you cover for glass splashbacks?
We cover the whole of Berkshire, including Reading, Slough, Bracknell, Maidenhead and Wokingham, and postcode areas GU, RG, SL. Building rules for glass splashbacks here follow the regulations for England. Enter your postcode on the quote form and we will confirm cover; then a glazier will arrange a free survey before giving you a written quote.
Other glazing services in Berkshire
- Replacement Glass in Berkshire
- Misted Glass Repair in Berkshire
- Emergency Glazing in Berkshire
- Safety Glass in Berkshire
- Window Repairs in Berkshire
- Window Film in Berkshire
- uPVC Windows in Berkshire
- Aluminium Windows in Berkshire
- Sash Windows in Berkshire
- Composite Doors in Berkshire
- Bifold Doors in Berkshire
- Sliding Doors in Berkshire
- Secondary Glazing in Berkshire
- Roof Lanterns in Berkshire
- Glass Balustrades in Berkshire
- Frameless Glass in Berkshire
- Shower Screens in Berkshire
- Bespoke Mirrors in Berkshire
- Glass Roofs in Berkshire
- Shopfront Glazing in Berkshire
- Curtain Walling in Berkshire
- Glass Partitions in Berkshire
- Property Glazing in Berkshire
Get a written quote in Berkshire
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.