Call 0800 088 6248

Clwyd · Wales

Glass Splashbacks in Clwyd

Looking for a glass splashback in Clwyd? Our glaziers can template your finished kitchen and quote for toughened, back-painted glass made with every socket cut-out in place.

  • Guide from £225
  • 13 towns covered
  • Postcode areas CH, LL

Get your free quote

Start with your postcode. A glazier will be in touch to arrange a free survey.

By sending this form you agree we can contact you about this enquiry. See our privacy policy for how we use your details.

No obligation. Prefer to talk? Call 0800 088 6248 or WhatsApp us.

Toughened glass splashback across Clwyd

Glass splashbacks have no grout lines to stain, so cleaning is simply a soft cloth with warm soapy water or a non-abrasive glass cleaner. Avoid scourers, abrasive creams and sharp scrapers, which can scratch the glass surface and dull the finish over time.

The price depends on the total glass area, the number of panels and joints, the number of cut-outs, the colour and glass type, and access to the wall. Low-iron glass, metallic or printed finishes and complex shapes add cost. See the guide prices for typical ranges.

Colours look different on screens, in daylight and under kitchen lighting, so choose from a physical glass sample rather than a website or paint chart. We can match many paint and RAL colours, and a sample panel viewed in your own kitchen avoids surprises.

After templating, made-to-measure splashbacks are usually ready within a few weeks, depending on colour and finish. Fitting a typical kitchen takes part of a day, and the kitchen can normally be used again straight afterwards, though the silicone needs time to cure fully.

Pale green glass splashback behind a hob in a white kitchen

Towns we cover for glass splashbacks in Clwyd

Choose your town for local details, nearby areas and the postcode districts we cover.

What applies in Clwyd

Building regulations do not usually apply to this type of work, but we confirm anything that does in writing with your quote.

Clwyd has its own coastline, so for homes and businesses near the sea, salt air and wind-driven rain are part of the brief. Splashbacks sit indoors, so the coast affects them little, but kitchens in damp coastal homes can see condensation on cold external walls. The wall needs to be dry and sound before bonding, and good extraction helps keep edges and silicone clean.

Older rural homes often have uneven solid walls with lime plaster or stone, so the wall may need making flat before glass can be bonded. Where a range cooker is fitted, its heat and clearance needs are checked before ordering.

Guide prices

Guide prices inc VAT for typical jobs. Remote and island locations are quoted by arrangement. Your written quote fixes the price after measuring.
Typical jobGuide price inc VAT
Hob splashback, 900 × 750 mm£225 – £285
Run behind worktop, 2400 × 600 mm£395 – £515
Low-iron, 900 × 750 mm£235 – £295

Choosing your glass splashbacks

Satin finish

Acid-etched glass with a soft, low-sheen face that reduces reflections and glare, useful opposite windows or bright lighting.

Back-painted colour

Toughened glass painted on the back in a matched colour, giving a smooth, glossy finish in almost any shade to suit units or walls.

Printed design

A digitally printed image or pattern on the back of the glass, sealed behind it so the front stays smooth and wipeable.

Low-iron glass

Glass with less iron, removing the green tint of standard glass so whites, creams and pale colours look true to the sample.

Glass Splashbacks in Clwyd: questions

Can a glass splashback go behind a hob?

Yes, provided it is toughened glass and the hob maker's clearances are followed. Toughened glass copes with the heat from a hob far better than ordinary glass, and it is what we fit behind cookers. Some gas hobs need a minimum gap to the wall, so we check your hob's instructions before the glass is ordered.

What affects the cost of a glass splashback?

The main cost drivers are the total glass area, the number of panels and joints, the number of socket and switch cut-outs, the colour and glass type, and how easy the wall is to reach. Low-iron glass, metallic or printed finishes and shaped panels add cost. See the guide prices for typical ranges.

How long does it take to get a glass splashback fitted?

After templating, made-to-measure splashbacks are usually ready within a few weeks, depending on the colour and finish. Fitting a typical kitchen takes part of a day, and you can normally use the kitchen again once we have finished. The silicone needs time to cure fully, and we tell you how long on the day.

When should my glass splashback be measured?

Your splashback should be templated after the worktops, units and hob are installed and any electrical work is finished. The glass is made to the exact finished dimensions, including socket positions, so measuring from plans or before worktops go in often leads to panels that do not fit and have to be remade.

Which parts of Clwyd do you cover for glass splashbacks?

We cover the whole of Clwyd, including Wrexham, Buckley, Deeside, Colwyn Bay and Flint, and postcode areas CH, LL. Building rules for glass splashbacks here follow the regulations for Wales. Enter your postcode on the quote form and we will confirm cover; then a glazier will arrange a free survey before giving you a written quote.

Get a written quote in Clwyd

Free survey for new glazing, clear guide prices and one point of contact for every glazing job.

CallGet a quote