Cumbria · England
Glass Splashbacks in Cumbria
Our glaziers fit back-painted glass splashbacks in Cumbria, using low-iron glass for pale colours so whites and creams look true to the sample you chose.
- Guide from £225
- 9 towns covered
- Postcode areas CA, LA
Glass splashback behind hob in Cumbria: what to know
Long runs and tall walls are usually made from more than one panel, because large sheets are heavy and hard to carry through houses. Joints are planned at corners, behind the hob centre line or at natural breaks, and are finished with a thin, neat silicone line.
Toughened glass cannot be cut or drilled after toughening, so every socket, switch, extractor and window-reveal cut-out is made beforehand. Sockets cannot be moved after the glass is ordered without remaking the panel, so electrical positions need to be final at templating.
Splashbacks are made from toughened glass because it copes with heat from a hob and with the stress around socket cut-outs far better than ordinary glass. Untoughened coloured glass is more prone to cracking behind a hob or across a cut-out, so we only fit toughened panels.
Standard glass has a green tint that shows through back-painted colours, especially whites, creams and pale greys. Low-iron glass contains less iron, removes most of that tint and keeps the painted colour close to the sample, so it is the usual choice for light colours.
Towns we cover for glass splashbacks in Cumbria
Choose your town for local details, nearby areas and the postcode districts we cover.
What applies in Cumbria
Building regulations do not usually apply to this type of work, but we confirm anything that does in writing with your quote.
Cumbria has its own coastline, so for homes and businesses near the sea, salt air and wind-driven rain are part of the brief. Splashbacks sit indoors, so the coast affects them little, but kitchens in damp coastal homes can see condensation on cold external walls. The wall needs to be dry and sound before bonding, and good extraction helps keep edges and silicone clean.
Older rural homes often have uneven solid walls with lime plaster or stone, so the wall may need making flat before glass can be bonded. Where a range cooker is fitted, its heat and clearance needs are checked before ordering.
Guide prices
| Typical job | Guide price inc VAT |
|---|---|
| Hob splashback, 900 × 750 mm | £225 – £285 |
| Run behind worktop, 2400 × 600 mm | £395 – £515 |
| Low-iron, 900 × 750 mm | £235 – £295 |
Choosing your glass splashbacks
Clear glass panel
Unpainted toughened glass over a painted wall or feature finish, protecting it from splashes while letting the surface behind show.
Satin finish
Acid-etched glass with a soft, low-sheen face that reduces reflections and glare, useful opposite windows or bright lighting.
Metallic or sparkle finish
Back-painted glass with metallic or fine sparkle effects, adding depth and reflection without the upkeep of polished metal.
Low-iron glass
Glass with less iron, removing the green tint of standard glass so whites, creams and pale colours look true to the sample.
Glass Splashbacks in Cumbria: questions
Why does my white glass splashback look slightly green?
Standard glass contains iron, which gives it a green tint that shows through pale back-painted colours, particularly white and cream. Low-iron glass has much less iron, so the colour behind looks close to the painted sample. If you are choosing a light colour, it is worth specifying low-iron glass from the start.
Can you cut holes in a glass splashback for sockets?
Yes. Socket, switch and extractor cut-outs are made at the factory before the glass is toughened, because toughened glass cannot be cut afterwards. That means socket positions must be final when we template. If sockets need moving or adding, a qualified electrician should do that first, and we template around the new positions.
What affects the cost of a glass splashback?
The main cost drivers are the total glass area, the number of panels and joints, the number of socket and switch cut-outs, the colour and glass type, and how easy the wall is to reach. Low-iron glass, metallic or printed finishes and shaped panels add cost. See the guide prices for typical ranges.
How long does it take to get a glass splashback fitted?
After templating, made-to-measure splashbacks are usually ready within a few weeks, depending on the colour and finish. Fitting a typical kitchen takes part of a day, and you can normally use the kitchen again once we have finished. The silicone needs time to cure fully, and we tell you how long on the day.
Which parts of Cumbria do you cover for glass splashbacks?
We cover the whole of Cumbria, including Carlisle, Barrow-in-Furness, Kendal, Whitehaven and Workington, and postcode areas CA, LA. Building rules for glass splashbacks here follow the regulations for England. Enter your postcode on the quote form and we will confirm cover; then a glazier will arrange a free survey before giving you a written quote.
Other glazing services in Cumbria
- Replacement Glass in Cumbria
- Misted Glass Repair in Cumbria
- Emergency Glazing in Cumbria
- Safety Glass in Cumbria
- Window Repairs in Cumbria
- Window Film in Cumbria
- uPVC Windows in Cumbria
- Aluminium Windows in Cumbria
- Sash Windows in Cumbria
- Composite Doors in Cumbria
- Bifold Doors in Cumbria
- Sliding Doors in Cumbria
- Secondary Glazing in Cumbria
- Roof Lanterns in Cumbria
- Glass Balustrades in Cumbria
- Frameless Glass in Cumbria
- Shower Screens in Cumbria
- Bespoke Mirrors in Cumbria
- Glass Roofs in Cumbria
- Shopfront Glazing in Cumbria
- Curtain Walling in Cumbria
- Glass Partitions in Cumbria
- Property Glazing in Cumbria
Get a written quote in Cumbria
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.