Dyfed · Wales
Glass Splashbacks in Dyfed
Fitting a new kitchen in Dyfed? Once the worktops and hob are in, we can template, colour-match and fit glass splashbacks that line up with your units and sockets.
- Guide from £225
- 10 towns covered
- Postcode areas SA, SY
Glass splashback behind hob for homes and businesses in Dyfed
Hob makers set minimum clearances between the hob and nearby wall surfaces, and gas hobs in particular can have specific requirements. We check your hob's installation instructions before ordering so the glass, its cut-outs and any joints sit where the manufacturer allows.
Splashbacks are templated once the worktops, units and hob are fitted, not from kitchen plans. Worktop heights, wall angles and socket positions often move during installation, and the glass is made to the finished dimensions so edges line up and gaps stay even.
Long runs and tall walls are usually made from more than one panel, because large sheets are heavy and hard to carry through houses. Joints are planned at corners, behind the hob centre line or at natural breaks, and are finished with a thin, neat silicone line.
Toughened glass cannot be cut or drilled after toughening, so every socket, switch, extractor and window-reveal cut-out is made beforehand. Sockets cannot be moved after the glass is ordered without remaking the panel, so electrical positions need to be final at templating.
Towns we cover for glass splashbacks in Dyfed
Choose your town for local details, nearby areas and the postcode districts we cover.
What applies in Dyfed
Building regulations do not usually apply to this type of work, but we confirm anything that does in writing with your quote.
Dyfed has its own coastline, so for homes and businesses near the sea, salt air and wind-driven rain are part of the brief. Splashbacks sit indoors, so the coast affects them little, but kitchens in damp coastal homes can see condensation on cold external walls. The wall needs to be dry and sound before bonding, and good extraction helps keep edges and silicone clean.
Older rural homes often have uneven solid walls with lime plaster or stone, so the wall may need making flat before glass can be bonded. Where a range cooker is fitted, its heat and clearance needs are checked before ordering.
Guide prices
| Typical job | Guide price inc VAT |
|---|---|
| Hob splashback, 900 × 750 mm | £225 – £285 |
| Run behind worktop, 2400 × 600 mm | £395 – £515 |
| Low-iron, 900 × 750 mm | £235 – £295 |
Choosing your glass splashbacks
Satin finish
Acid-etched glass with a soft, low-sheen face that reduces reflections and glare, useful opposite windows or bright lighting.
Clear glass panel
Unpainted toughened glass over a painted wall or feature finish, protecting it from splashes while letting the surface behind show.
Metallic or sparkle finish
Back-painted glass with metallic or fine sparkle effects, adding depth and reflection without the upkeep of polished metal.
Back-painted colour
Toughened glass painted on the back in a matched colour, giving a smooth, glossy finish in almost any shade to suit units or walls.
Glass Splashbacks in Dyfed: questions
Can I fit a glass splashback myself?
It is possible, but the risks are mostly in measuring and handling. A small error in templating or a socket position means the toughened panel has to be remade, because it cannot be trimmed. Large panels are heavy and awkward to place without damaging worktops, and the adhesive must suit the painted back. We measure, make and fit as one job.
When should my glass splashback be measured?
Your splashback should be templated after the worktops, units and hob are installed and any electrical work is finished. The glass is made to the exact finished dimensions, including socket positions, so measuring from plans or before worktops go in often leads to panels that do not fit and have to be remade.
Can a glass splashback go behind a hob?
Yes, provided it is toughened glass and the hob maker's clearances are followed. Toughened glass copes with the heat from a hob far better than ordinary glass, and it is what we fit behind cookers. Some gas hobs need a minimum gap to the wall, so we check your hob's instructions before the glass is ordered.
How do I clean a glass splashback?
Wipe it with a soft cloth and warm soapy water, or a non-abrasive glass cleaner, then buff dry for a streak-free finish. Grease behind the hob comes off easily because there are no grout lines. Avoid scourers, abrasive creams and blades, which can scratch the glass, and do not use cleaners that could seep behind the edges.
Which parts of Dyfed do you cover for glass splashbacks?
We cover the whole of Dyfed, including Llanelli, Ammanford, Aberystwyth, Carmarthen and Haverfordwest, and postcode areas SA, SY. Building rules for glass splashbacks here follow the regulations for Wales. Enter your postcode on the quote form and we will confirm cover; then a glazier will arrange a free survey before giving you a written quote.
Other glazing services in Dyfed
- Replacement Glass in Dyfed
- Misted Glass Repair in Dyfed
- Emergency Glazing in Dyfed
- Safety Glass in Dyfed
- Window Repairs in Dyfed
- Window Film in Dyfed
- uPVC Windows in Dyfed
- Aluminium Windows in Dyfed
- Sash Windows in Dyfed
- Composite Doors in Dyfed
- Bifold Doors in Dyfed
- Sliding Doors in Dyfed
- Secondary Glazing in Dyfed
- Roof Lanterns in Dyfed
- Glass Balustrades in Dyfed
- Frameless Glass in Dyfed
- Shower Screens in Dyfed
- Bespoke Mirrors in Dyfed
- Glass Roofs in Dyfed
- Shopfront Glazing in Dyfed
- Curtain Walling in Dyfed
- Glass Partitions in Dyfed
- Property Glazing in Dyfed
Get a written quote in Dyfed
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.