Kent · England
Glass Splashbacks in Kent
A glass splashback in Kent starts with templating after the worktops are fitted, then a written quote that fixes the price for the glass, colour and finish shown.
- Guide from £225
- 23 towns covered
- Postcode areas BR, CT, DA, ME, TN
Glass splashback behind hob in Kent
Splashbacks are made from toughened glass because it copes with heat from a hob and with the stress around socket cut-outs far better than ordinary glass. Untoughened coloured glass is more prone to cracking behind a hob or across a cut-out, so we only fit toughened panels.
The price depends on the total glass area, the number of panels and joints, the number of cut-outs, the colour and glass type, and access to the wall. Low-iron glass, metallic or printed finishes and complex shapes add cost. See the guide prices for typical ranges.
Glass splashbacks have no grout lines to stain, so cleaning is simply a soft cloth with warm soapy water or a non-abrasive glass cleaner. Avoid scourers, abrasive creams and sharp scrapers, which can scratch the glass surface and dull the finish over time.
Colours look different on screens, in daylight and under kitchen lighting, so choose from a physical glass sample rather than a website or paint chart. We can match many paint and RAL colours, and a sample panel viewed in your own kitchen avoids surprises.
Towns we cover for glass splashbacks in Kent
Choose your town for local details, nearby areas and the postcode districts we cover.
What applies in Kent
Building regulations do not usually apply to this type of work, but we confirm anything that does in writing with your quote.
Kent has its own coastline, so for homes and businesses near the sea, salt air and wind-driven rain are part of the brief. Splashbacks sit indoors, so the coast affects them little, but kitchens in damp coastal homes can see condensation on cold external walls. The wall needs to be dry and sound before bonding, and good extraction helps keep edges and silicone clean.
Older rural homes often have uneven solid walls with lime plaster or stone, so the wall may need making flat before glass can be bonded. Where a range cooker is fitted, its heat and clearance needs are checked before ordering.
Guide prices
| Typical job | Guide price inc VAT |
|---|---|
| Hob splashback, 900 × 750 mm | £225 – £285 |
| Run behind worktop, 2400 × 600 mm | £395 – £515 |
| Low-iron, 900 × 750 mm | £235 – £295 |
Choosing your glass splashbacks
Metallic or sparkle finish
Back-painted glass with metallic or fine sparkle effects, adding depth and reflection without the upkeep of polished metal.
Satin finish
Acid-etched glass with a soft, low-sheen face that reduces reflections and glare, useful opposite windows or bright lighting.
Low-iron glass
Glass with less iron, removing the green tint of standard glass so whites, creams and pale colours look true to the sample.
Printed design
A digitally printed image or pattern on the back of the glass, sealed behind it so the front stays smooth and wipeable.
Glass Splashbacks in Kent: questions
How do I clean a glass splashback?
Wipe it with a soft cloth and warm soapy water, or a non-abrasive glass cleaner, then buff dry for a streak-free finish. Grease behind the hob comes off easily because there are no grout lines. Avoid scourers, abrasive creams and blades, which can scratch the glass, and do not use cleaners that could seep behind the edges.
Can a glass splashback go behind a hob?
Yes, provided it is toughened glass and the hob maker's clearances are followed. Toughened glass copes with the heat from a hob far better than ordinary glass, and it is what we fit behind cookers. Some gas hobs need a minimum gap to the wall, so we check your hob's instructions before the glass is ordered.
What affects the cost of a glass splashback?
The main cost drivers are the total glass area, the number of panels and joints, the number of socket and switch cut-outs, the colour and glass type, and how easy the wall is to reach. Low-iron glass, metallic or printed finishes and shaped panels add cost. See the guide prices for typical ranges.
Why does my white glass splashback look slightly green?
Standard glass contains iron, which gives it a green tint that shows through pale back-painted colours, particularly white and cream. Low-iron glass has much less iron, so the colour behind looks close to the painted sample. If you are choosing a light colour, it is worth specifying low-iron glass from the start.
Which parts of Kent do you cover for glass splashbacks?
We cover the whole of Kent, including Maidstone, Gillingham, Chatham, Tunbridge Wells and Folkestone, and postcode areas BR, CT, DA, ME, TN. Building rules for glass splashbacks here follow the regulations for England. Enter your postcode on the quote form and we will confirm cover; then a glazier will arrange a free survey before giving you a written quote.
Other glazing services in Kent
- Replacement Glass in Kent
- Misted Glass Repair in Kent
- Emergency Glazing in Kent
- Safety Glass in Kent
- Window Repairs in Kent
- Window Film in Kent
- uPVC Windows in Kent
- Aluminium Windows in Kent
- Sash Windows in Kent
- Composite Doors in Kent
- Bifold Doors in Kent
- Sliding Doors in Kent
- Secondary Glazing in Kent
- Roof Lanterns in Kent
- Glass Balustrades in Kent
- Frameless Glass in Kent
- Shower Screens in Kent
- Bespoke Mirrors in Kent
- Glass Roofs in Kent
- Shopfront Glazing in Kent
- Curtain Walling in Kent
- Glass Partitions in Kent
- Property Glazing in Kent
Get a written quote in Kent
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.