Call 0800 088 6248

Kent · England

Frameless Glass in Kent

Is your glass entrance door in Kent dropping, dragging or slamming shut? We can check the floor spring and fittings, adjust them, or quote for a replacement door.

  • Guide from £795
  • 23 towns covered
  • Postcode areas BR, CT, DA, ME, TN

Get your free quote

Start with your postcode. A glazier will be in touch to arrange a free survey.

By sending this form you agree we can contact you about this enquiry. See our privacy policy for how we use your details.

No obligation. Prefer to talk? Call 0800 088 6248 or WhatsApp us.

About glass internal doors in Kent

In workplaces in England, Wales and Scotland, the Workplace (Health, Safety and Welfare) Regulations 1992 require glass in doors, walls and partitions to be of safety material or protected where needed for safety, and to be marked or otherwise made apparent so people notice it.

For buildings other than dwellings in England, access guidance says a manual door should open with no more than 30N of force at its edge from closed to 30 degrees, and 22.5N from 30 to 60 degrees. Heavy glass doors and closers are set up with that limit in mind.

Fixed glass screens are held in slim channels or clamps at the floor, walls and ceiling, and the head fixing needs something solid to bite into. Walls and ceilings are rarely perfectly square, so templating records the true shape and the glass is made to follow it, keeping gaps even.

Toughened glass cannot be cut, drilled or notched once it has been toughened. Holes for patch fittings, cut-outs for locks and handles, and any shaped corners are all made before toughening, which is why we template the opening first and the glass is made to order rather than cut on site.

Frameless glass doors and screens at an office reception

What applies in Kent

Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.

For shops and other non-domestic buildings in England, Approved Document M covers accessible entrances, and Approved Document K requires large areas of glass that people could walk into to carry manifestation (visible markings).

Kent has its own coastline, so for homes and businesses near the sea, salt air and wind-driven rain are part of the brief. External frameless entrances near the sea face salt spray on patch fittings, pivots and floor spring covers, which can mark or pit finishes over time. Hardware suited to exposed sites, and rinsing fittings during routine cleaning, help them stay smooth and presentable.

Older cottages and farmhouses rarely have square openings or level floors, so templating matters even more for frameless glass. Floors may also lack the depth for a floor spring, in which case top-hung sliding gear or wall hinges can suit better.

Guide prices

Guide prices inc VAT for typical jobs. Remote and island locations are quoted by arrangement. Your written quote fixes the price after measuring.
Typical jobGuide price inc VAT
Frameless glass door with fittings£1,295 – £1,895
Door with fixed side screen£2,195 – £3,195
Fixed frameless screen, about 2 m²£795 – £1,095

Choosing your frameless glass

Low-iron glass

Glass with less iron, removing the green tint seen on the edges of standard glass, so thick panels look clearer and colours stay true.

Frameless sliding door

A glass panel running on top-hung sliding gear across the opening, saving floor space where a swinging door would get in the way.

Satin or patterned glass

Acid-etched, sandblasted-effect or patterned glass that gives privacy while still passing light, available as full panels or as bands.

Glass-to-wall hinged door

Hinges clamp the glass directly to a wall or fixed glass panel. Suits lighter internal doors where there is no room for a floor spring.

Frameless Glass in Kent: questions

Will a frameless glass door block noise and draughts?

Only partly. Frameless doors run with small gaps at the sides and bottom so the glass can swing freely, which lets some sound and air through. Clear seal strips can narrow the gaps. If you need a quiet meeting room or a draught-free external entrance, a framed or acoustic glazed system will perform better, and we can quote for both.

What happens if a frameless glass door breaks?

Toughened glass breaks into small, blunt pieces rather than large shards, so the door will need to be fully replaced rather than repaired. We can make the opening safe and secure in the meantime, then remake the panel from the original measurements or a fresh template, with holes and cut-outs formed before toughening.

Do glass doors and screens need markings on them?

In buildings other than dwellings in England, large clear glass that people could walk into needs manifestation at two heights, 850–1000mm and 1400–1600mm from the floor. Workplace rules across Great Britain also require glass to be made apparent where needed. Homes are not covered by the manifestation guidance, though a frosted band can still be sensible.

Do frameless glass doors have to be safety glass?

Yes. Glass in doors is a critical location, so in England it must meet the impact requirements in Approved Document K, and frameless doors are made from toughened safety glass to suit. Toughened glass also lets the door carry its own hinges and handles. Other UK nations have equivalent guidance, and we specify the glass to suit where you are.

Which parts of Kent do you cover for frameless glass?

We cover the whole of Kent, including Maidstone, Gillingham, Chatham, Tunbridge Wells and Folkestone, and postcode areas BR, CT, DA, ME, TN. Building rules for frameless glass here follow the regulations for England. Enter your postcode on the quote form and we will confirm cover; then a glazier will arrange a free survey before giving you a written quote.

Get a written quote in Kent

Free survey for new glazing, clear guide prices and one point of contact for every glazing job.

CallGet a quote