Call 0800 088 6248

Lanarkshire · Scotland

Glass Splashbacks in Lanarkshire

Want a wipe-clean wall behind a basin or vanity in Lanarkshire? We can quote for toughened glass splashbacks in colours, satin finishes or clear glass over a feature wall.

  • Guide from £225
  • 14 towns covered
  • Postcode areas G, ML

Get your free quote

Start with your postcode. A glazier will be in touch to arrange a free survey.

By sending this form you agree we can contact you about this enquiry. See our privacy policy for how we use your details.

No obligation. Prefer to talk? Call 0800 088 6248 or WhatsApp us.

Kitchen glass splashback in Lanarkshire

Long runs and tall walls are usually made from more than one panel, because large sheets are heavy and hard to carry through houses. Joints are planned at corners, behind the hob centre line or at natural breaks, and are finished with a thin, neat silicone line.

Colours look different on screens, in daylight and under kitchen lighting, so choose from a physical glass sample rather than a website or paint chart. We can match many paint and RAL colours, and a sample panel viewed in your own kitchen avoids surprises.

After templating, made-to-measure splashbacks are usually ready within a few weeks, depending on colour and finish. Fitting a typical kitchen takes part of a day, and the kitchen can normally be used again straight afterwards, though the silicone needs time to cure fully.

Our glaziers remove and refit socket and switch faceplates so the glass can sit behind them, with the power isolated first. Moving or adding sockets, or any other electrical alteration, needs a qualified electrician, ideally before the splashback is templated.

Pale green glass splashback behind a hob in a white kitchen

Towns we cover for glass splashbacks in Lanarkshire

Choose your town for local details, nearby areas and the postcode districts we cover.

What applies in Lanarkshire

Building regulations do not usually apply to this type of work, but we confirm anything that does in writing with your quote.

Parts of Lanarkshire are within about 19 km of the coast, where exposure to wind and salt air is worth planning for. Splashbacks sit indoors, so the coast affects them little, but kitchens in damp coastal homes can see condensation on cold external walls. The wall needs to be dry and sound before bonding, and good extraction helps keep edges and silicone clean.

Older rural homes often have uneven solid walls with lime plaster or stone, so the wall may need making flat before glass can be bonded. Where a range cooker is fitted, its heat and clearance needs are checked before ordering.

Guide prices

Guide prices inc VAT for typical jobs. Remote and island locations are quoted by arrangement. Your written quote fixes the price after measuring.
Typical jobGuide price inc VAT
Hob splashback, 900 × 750 mm£225 – £285
Run behind worktop, 2400 × 600 mm£395 – £515
Low-iron, 900 × 750 mm£235 – £295

Choosing your glass splashbacks

Low-iron glass

Glass with less iron, removing the green tint of standard glass so whites, creams and pale colours look true to the sample.

Metallic or sparkle finish

Back-painted glass with metallic or fine sparkle effects, adding depth and reflection without the upkeep of polished metal.

Satin finish

Acid-etched glass with a soft, low-sheen face that reduces reflections and glare, useful opposite windows or bright lighting.

Clear glass panel

Unpainted toughened glass over a painted wall or feature finish, protecting it from splashes while letting the surface behind show.

Glass Splashbacks in Lanarkshire: questions

When should my glass splashback be measured?

Your splashback should be templated after the worktops, units and hob are installed and any electrical work is finished. The glass is made to the exact finished dimensions, including socket positions, so measuring from plans or before worktops go in often leads to panels that do not fit and have to be remade.

What affects the cost of a glass splashback?

The main cost drivers are the total glass area, the number of panels and joints, the number of socket and switch cut-outs, the colour and glass type, and how easy the wall is to reach. Low-iron glass, metallic or printed finishes and shaped panels add cost. See the guide prices for typical ranges.

How long does it take to get a glass splashback fitted?

After templating, made-to-measure splashbacks are usually ready within a few weeks, depending on the colour and finish. Fitting a typical kitchen takes part of a day, and you can normally use the kitchen again once we have finished. The silicone needs time to cure fully, and we tell you how long on the day.

How do I clean a glass splashback?

Wipe it with a soft cloth and warm soapy water, or a non-abrasive glass cleaner, then buff dry for a streak-free finish. Grease behind the hob comes off easily because there are no grout lines. Avoid scourers, abrasive creams and blades, which can scratch the glass, and do not use cleaners that could seep behind the edges.

Which parts of Lanarkshire do you cover for glass splashbacks?

We cover the whole of Lanarkshire, including East Kilbride, Hamilton, Cumbernauld, Coatbridge and Airdrie, and postcode areas G, ML. Building rules for glass splashbacks here follow the regulations for Scotland. Enter your postcode on the quote form and we will confirm cover; then a glazier will arrange a free survey before giving you a written quote.

Get a written quote in Lanarkshire

Free survey for new glazing, clear guide prices and one point of contact for every glazing job.

CallGet a quote