Lanarkshire · Scotland
Bespoke Mirrors in Lanarkshire
Mirrors with black edges in Lanarkshire cannot be restored, but we can measure and replace them with new mirror bonded using a compatible adhesive to protect the silver.
- Guide from £205
- 14 towns covered
- Postcode areas G, ML
Made to measure mirrors in Lanarkshire: what to know
Mirrors must be bonded with an adhesive made to be compatible with mirror backing. Some general-purpose adhesives and acidic sealants can attack the protective coatings and the silver, causing dark patches that spread from behind. We only use mirror-compatible products.
To protect the edges, spray glass cleaner onto a soft cloth rather than directly onto the mirror, so liquid does not run down and soak into the bottom edge. Avoid harsh or abrasive cleaners, and dry the edges after cleaning in bathrooms.
Templating lets a mirror follow sloping ceilings, curved alcoves, skirting lines and fitted furniture. Cut-outs for sockets and switches are marked on the template, and the faceplates are removed and refitted so the mirror sits neatly behind them.
Safety backing is a sensible choice wherever someone could fall or knock against a mirror, such as sliding wardrobe doors, full-height mirrors, children's rooms, gyms and dance studios. We recommend it at survey wherever the position or use of the room suggests it.
Towns we cover for bespoke mirrors in Lanarkshire
Choose your town for local details, nearby areas and the postcode districts we cover.
What applies in Lanarkshire
Section 4 (Safety) of the Scottish Technical Handbooks covers glazing that people could collide with, such as glass in and beside doors and low-level glazing, where safety glass is needed.
Parts of Lanarkshire are within about 19 km of the coast, where exposure to wind and salt air is worth planning for. Mirrors are fitted indoors, but salty, humid coastal air can still reach the silver backing through exposed edges, particularly in bathrooms and near entrances. Protected edges, a compatible adhesive and good ventilation all help prevent black edge corrosion.
Older rural homes often have uneven walls of stone or lime plaster, which can distort a bonded mirror unless the wall is levelled or a backing board is used. Damp solid walls also need checking before a mirror is fixed to them.
Guide prices
| Typical job | Guide price inc VAT |
|---|---|
| Polished mirror, 1200 × 900 mm | £205 – £265 |
| Safety-backed mirror, 1800 × 1000 mm | £365 – £465 |
| Gym mirror wall, 4000 × 2000 mm | £995 – £1,295 |
Choosing your bespoke mirrors
Heated demister pad
A thin heating pad bonded behind a bathroom mirror to keep an area clear of steam, wired in by a qualified electrician.
Clear silver mirror
Standard silver-coated float glass mirror, cut to size, suited to most rooms, wardrobes and wall mirrors where a true, neutral reflection is wanted.
Tinted mirror
Grey or bronze tinted mirror that softens the reflection and adds warmth or depth, often used as a feature wall or in hospitality spaces.
Safety-backed mirror
Mirror with a bonded backing film that holds fragments together if it breaks, recommended for doors, full-height mirrors, gyms and children's rooms.
Bespoke Mirrors in Lanarkshire: questions
Can I have a bespoke mirror in a bathroom?
Yes, provided the room is well ventilated and the mirror is protected from standing water. We use mirror that meets the relevant standard for internal use, bond it with a compatible adhesive and keep edges away from splashes where possible. A heated demister pad can keep part of the mirror clear, wired in by a qualified electrician.
Can a mirror be cut around sockets and light switches?
Yes. We mark socket and switch positions on the template, cut the openings in the mirror, then remove and refit the faceplates so the mirror sits neatly behind them with the power isolated. If sockets need moving or adding, a qualified electrician should do that before we template so the cut-outs line up.
How should I clean a mirror without damaging it?
Spray glass cleaner onto a soft, lint-free cloth rather than directly onto the mirror, then wipe and buff dry. That stops liquid running down and soaking into the bottom edge, which is where black edges usually start. Avoid abrasive pads and harsh chemical cleaners, and dry the edges after cleaning in bathrooms.
How is a large mirror fixed to the wall?
Large mirrors are usually bonded with an adhesive made for mirror backing and supported along the bottom edge by a slim channel or clips. The support carries the weight while the adhesive cures and adds security afterwards. Smaller mirrors can be screw-fixed through drilled holes with decorative caps, which makes them easier to remove later.
Which parts of Lanarkshire do you cover for bespoke mirrors?
We cover the whole of Lanarkshire, including East Kilbride, Hamilton, Cumbernauld, Coatbridge and Airdrie, and postcode areas G, ML. Building rules for bespoke mirrors here follow the regulations for Scotland. Enter your postcode on the quote form and we will confirm cover; then a glazier will arrange a free survey before giving you a written quote.
Other glazing services in Lanarkshire
- Replacement Glass in Lanarkshire
- Misted Glass Repair in Lanarkshire
- Emergency Glazing in Lanarkshire
- Safety Glass in Lanarkshire
- Window Repairs in Lanarkshire
- Window Film in Lanarkshire
- uPVC Windows in Lanarkshire
- Aluminium Windows in Lanarkshire
- Sash Windows in Lanarkshire
- Composite Doors in Lanarkshire
- Bifold Doors in Lanarkshire
- Sliding Doors in Lanarkshire
- Secondary Glazing in Lanarkshire
- Roof Lanterns in Lanarkshire
- Glass Balustrades in Lanarkshire
- Frameless Glass in Lanarkshire
- Shower Screens in Lanarkshire
- Glass Splashbacks in Lanarkshire
- Glass Roofs in Lanarkshire
- Shopfront Glazing in Lanarkshire
- Curtain Walling in Lanarkshire
- Glass Partitions in Lanarkshire
- Property Glazing in Lanarkshire
Get a written quote in Lanarkshire
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.