Somerset · England
Glass Splashbacks in Somerset
Fitting a new kitchen in Somerset? Once the worktops and hob are in, we can template, colour-match and fit glass splashbacks that line up with your units and sockets.
- Guide from £225
- 16 towns covered
- Postcode areas BA, BS, TA
Toughened glass splashback in Somerset: what to know
Toughened glass cannot be cut or drilled after toughening, so every socket, switch, extractor and window-reveal cut-out is made beforehand. Sockets cannot be moved after the glass is ordered without remaking the panel, so electrical positions need to be final at templating.
Long runs and tall walls are usually made from more than one panel, because large sheets are heavy and hard to carry through houses. Joints are planned at corners, behind the hob centre line or at natural breaks, and are finished with a thin, neat silicone line.
The price depends on the total glass area, the number of panels and joints, the number of cut-outs, the colour and glass type, and access to the wall. Low-iron glass, metallic or printed finishes and complex shapes add cost. See the guide prices for typical ranges.
Splashbacks are made from toughened glass because it copes with heat from a hob and with the stress around socket cut-outs far better than ordinary glass. Untoughened coloured glass is more prone to cracking behind a hob or across a cut-out, so we only fit toughened panels.
Towns we cover for glass splashbacks in Somerset
Choose your town for local details, nearby areas and the postcode districts we cover.
What applies in Somerset
Building regulations do not usually apply to this type of work, but we confirm anything that does in writing with your quote.
Somerset has its own coastline, so for homes and businesses near the sea, salt air and wind-driven rain are part of the brief. Splashbacks sit indoors, so the coast affects them little, but kitchens in damp coastal homes can see condensation on cold external walls. The wall needs to be dry and sound before bonding, and good extraction helps keep edges and silicone clean.
Older rural homes often have uneven solid walls with lime plaster or stone, so the wall may need making flat before glass can be bonded. Where a range cooker is fitted, its heat and clearance needs are checked before ordering.
Guide prices
| Typical job | Guide price inc VAT |
|---|---|
| Hob splashback, 900 × 750 mm | £225 – £285 |
| Run behind worktop, 2400 × 600 mm | £395 – £515 |
| Low-iron, 900 × 750 mm | £235 – £295 |
Choosing your glass splashbacks
Back-painted colour
Toughened glass painted on the back in a matched colour, giving a smooth, glossy finish in almost any shade to suit units or walls.
Satin finish
Acid-etched glass with a soft, low-sheen face that reduces reflections and glare, useful opposite windows or bright lighting.
Low-iron glass
Glass with less iron, removing the green tint of standard glass so whites, creams and pale colours look true to the sample.
Printed design
A digitally printed image or pattern on the back of the glass, sealed behind it so the front stays smooth and wipeable.
Glass Splashbacks in Somerset: questions
When should my glass splashback be measured?
Your splashback should be templated after the worktops, units and hob are installed and any electrical work is finished. The glass is made to the exact finished dimensions, including socket positions, so measuring from plans or before worktops go in often leads to panels that do not fit and have to be remade.
How do you match the colour of a glass splashback?
We can match many paint and RAL colours, and the most reliable way to choose is from a physical glass sample viewed in your own kitchen. Colours look different on screens and under different lighting. For pale colours we usually suggest low-iron glass, because standard glass adds a green tint to the painted back.
What affects the cost of a glass splashback?
The main cost drivers are the total glass area, the number of panels and joints, the number of socket and switch cut-outs, the colour and glass type, and how easy the wall is to reach. Low-iron glass, metallic or printed finishes and shaped panels add cost. See the guide prices for typical ranges.
How long does it take to get a glass splashback fitted?
After templating, made-to-measure splashbacks are usually ready within a few weeks, depending on the colour and finish. Fitting a typical kitchen takes part of a day, and you can normally use the kitchen again once we have finished. The silicone needs time to cure fully, and we tell you how long on the day.
Which parts of Somerset do you cover for glass splashbacks?
We cover the whole of Somerset, including Bath, Weston-super-Mare, Taunton, Yeovil and Bridgwater, and postcode areas BA, BS, TA. Building rules for glass splashbacks here follow the regulations for England. Enter your postcode on the quote form and we will confirm cover; then a glazier will arrange a free survey before giving you a written quote.
Other glazing services in Somerset
- Replacement Glass in Somerset
- Misted Glass Repair in Somerset
- Emergency Glazing in Somerset
- Safety Glass in Somerset
- Window Repairs in Somerset
- Window Film in Somerset
- uPVC Windows in Somerset
- Aluminium Windows in Somerset
- Sash Windows in Somerset
- Composite Doors in Somerset
- Bifold Doors in Somerset
- Sliding Doors in Somerset
- Secondary Glazing in Somerset
- Roof Lanterns in Somerset
- Glass Balustrades in Somerset
- Frameless Glass in Somerset
- Shower Screens in Somerset
- Bespoke Mirrors in Somerset
- Glass Roofs in Somerset
- Shopfront Glazing in Somerset
- Curtain Walling in Somerset
- Glass Partitions in Somerset
- Property Glazing in Somerset
Get a written quote in Somerset
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.