Call 0800 088 6248

Devon · England

Misted Glass Repair in Devon

Misted panes in Devon can usually be fixed by swapping the sealed unit alone, keeping your existing frames and avoiding the cost of new windows.

  • Guide from £155
  • 9 towns covered
  • Postcode areas EX, PL, TQ

Get your free quote

Start with your postcode. A glazier will be in touch to arrange a free survey.

By sending this form you agree we can contact you about this enquiry. See our privacy policy for how we use your details.

No obligation. Prefer to talk? Call 0800 088 6248 or WhatsApp us.

Blown double glazing units in Devon: what to know

A misted unit is a good opportunity to upgrade an older plain glass unit to one with a low-emissivity coating and gas fill. The new unit reduces heat loss through the glass and keeps the room-side pane warmer, without any change to the frame.

Condensation on the room-side surface of the glass is not the same problem. It usually comes from humid indoor air meeting a cold pane and can be wiped away. Only mist trapped between the two panes means the sealed unit itself has failed and needs replacing.

Check the paperwork for your windows before booking. Many sealed units come with a manufacturer guarantee against misting, and if your windows are still covered, the original installer or manufacturer may be responsible for replacing the failed unit under its terms.

The price of replacing misted units depends on the size of each unit, the glass specification, any bars or decorative features, how many units are done together, and access. Several units on one visit usually cost less each than separate visits for single windows.

Window with one misted double glazed pane beside a clear pane

Towns we cover for misted glass repair in Devon

Choose your town for local details, nearby areas and the postcode districts we cover.

What applies in Devon

Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.

Approved Document L sets the minimum energy performance for replacement windows and doors in existing homes in England: a U-value of 1.4 W/m²K, or Window Energy Rating band B for windows; doors can instead meet a Door Set Energy Rating (band B, or band C for doors more than 60% glazed); rooflights need 2.2 W/m²K.

Devon has its own coastline, so for homes and businesses near the sea, salt air and wind-driven rain are part of the brief. Salt air and wind-driven rain put extra strain on sealed unit edges in coastal homes. Keeping frame drainage clear and gaskets in good order matters more, and the glazier checks both so the replacement unit is not sitting in trapped water.

In flats and terraced streets, replacing misted units often means planning access, parking and carrying units up stairs. Upper-floor windows may need to be done from inside, and conservation areas may require matching bars or glass patterns.

Guide prices

Guide prices inc VAT for typical jobs. Remote and island locations are quoted by arrangement. Your written quote fixes the price after measuring.
Typical jobGuide price inc VAT
One misted unit, 600 × 900 mm£155 – £195
Two misted units, 600 × 900 mm£305 – £395
Four misted units, 600 × 1100 mm£685 – £875
Misted unit in a door, toughened£305 – £385

Choosing your misted glass repair

Toughened safety unit

Both panes toughened, for misted units in doors, beside doors or low down where safety glass is required.

Obscure glass unit

Patterned glass for bathrooms, landings and front doors, chosen to match existing obscure panes or to add privacy.

Laminated safety unit

A unit with laminated glass that holds together if broken, useful for ground-floor security and safety in critical locations.

Low-E upgrade unit

A coated pane and gas-filled cavity that reduce heat loss compared with older plain glass units, fitted in the same frame.

Misted Glass Repair in Devon: questions

How can I stop new sealed units misting early?

Keep the drainage slots at the bottom of the frame clear, so rainwater does not sit around the unit edges. Avoid pressure washing the seals, and do not paint over glazing gaskets. Check that opening sashes close properly, as a dropped sash can stress the unit. Report any cracked beads or failed gaskets early.

Is it worth replacing misted units or should I get new windows?

If the frames are sound, square and the hinges and locks work, replacing only the misted units is usually the more economical option. New windows make more sense if the frames are rotten, warped, draughty or hard to open. The glazier checks the frames at the survey and the quote will say if replacing units is not good value.

Can you clean the inside of a misted double glazing unit?

Not without breaking the seal. Some firms drill the glass, flush the cavity and fit a small vent, which can clear the mist for a while. It does not restore an airtight seal or gas fill, and white staining may not fully clear. Replacing the unit is the reliable way to restore a clear, sealed cavity.

Will a new unit match my other windows?

It can. The glazier records the unit thickness, spacer bar colour, any Georgian bars or leaded designs, and the obscure glass pattern if there is one. Most details can be matched closely. If an obscure pattern has been discontinued, the quote offers the closest available alternative so you can decide before anything is ordered.

Which parts of Devon do you cover for misted glass repair?

We cover the whole of Devon, including Plymouth, Exeter, Paignton, Torquay and Newton Abbot, and postcode areas EX, PL, TQ. Building rules for misted glass repair here follow the regulations for England. Enter your postcode on the quote form and we will confirm cover; then a glazier will arrange a free survey before giving you a written quote.

Get a written quote in Devon

Free survey for new glazing, clear guide prices and one point of contact for every glazing job.

CallGet a quote