Devon · England
Glass Splashbacks in Devon
A glass splashback in Devon starts with templating after the worktops are fitted, then a written quote that fixes the price for the glass, colour and finish shown.
- Guide from £225
- 9 towns covered
- Postcode areas EX, PL, TQ
Kitchen glass splashback in Devon: what to know
Our glaziers remove and refit socket and switch faceplates so the glass can sit behind them, with the power isolated first. Moving or adding sockets, or any other electrical alteration, needs a qualified electrician, ideally before the splashback is templated.
Long runs and tall walls are usually made from more than one panel, because large sheets are heavy and hard to carry through houses. Joints are planned at corners, behind the hob centre line or at natural breaks, and are finished with a thin, neat silicone line.
Standard glass has a green tint that shows through back-painted colours, especially whites, creams and pale greys. Low-iron glass contains less iron, removes most of that tint and keeps the painted colour close to the sample, so it is the usual choice for light colours.
Glass splashbacks have no grout lines to stain, so cleaning is simply a soft cloth with warm soapy water or a non-abrasive glass cleaner. Avoid scourers, abrasive creams and sharp scrapers, which can scratch the glass surface and dull the finish over time.
Towns we cover for glass splashbacks in Devon
Choose your town for local details, nearby areas and the postcode districts we cover.
What applies in Devon
Building regulations do not usually apply to this type of work, but we confirm anything that does in writing with your quote.
Devon has its own coastline, so for homes and businesses near the sea, salt air and wind-driven rain are part of the brief. Splashbacks sit indoors, so the coast affects them little, but kitchens in damp coastal homes can see condensation on cold external walls. The wall needs to be dry and sound before bonding, and good extraction helps keep edges and silicone clean.
Kitchens in flats and terraces often have narrow access and tight stairs, so long splashbacks may be split into shorter panels with planned joints. Parking for the fitting team and building rules on working hours can also affect scheduling.
Guide prices
| Typical job | Guide price inc VAT |
|---|---|
| Hob splashback, 900 × 750 mm | £225 – £285 |
| Run behind worktop, 2400 × 600 mm | £395 – £515 |
| Low-iron, 900 × 750 mm | £235 – £295 |
Choosing your glass splashbacks
Printed design
A digitally printed image or pattern on the back of the glass, sealed behind it so the front stays smooth and wipeable.
Back-painted colour
Toughened glass painted on the back in a matched colour, giving a smooth, glossy finish in almost any shade to suit units or walls.
Satin finish
Acid-etched glass with a soft, low-sheen face that reduces reflections and glare, useful opposite windows or bright lighting.
Clear glass panel
Unpainted toughened glass over a painted wall or feature finish, protecting it from splashes while letting the surface behind show.
Glass Splashbacks in Devon: questions
Why does my white glass splashback look slightly green?
Standard glass contains iron, which gives it a green tint that shows through pale back-painted colours, particularly white and cream. Low-iron glass has much less iron, so the colour behind looks close to the painted sample. If you are choosing a light colour, it is worth specifying low-iron glass from the start.
When should my glass splashback be measured?
Your splashback should be templated after the worktops, units and hob are installed and any electrical work is finished. The glass is made to the exact finished dimensions, including socket positions, so measuring from plans or before worktops go in often leads to panels that do not fit and have to be remade.
Can a glass splashback be fitted over existing tiles?
It is usually better to remove the tiles and make the wall good first. Glass needs a flat, sound surface for the adhesive to bond evenly, and grout lines, uneven tiles or loose tiles can show through or create stress points. Removing tiles also stops the glass standing too far forward of the worktop and sockets.
How do I clean a glass splashback?
Wipe it with a soft cloth and warm soapy water, or a non-abrasive glass cleaner, then buff dry for a streak-free finish. Grease behind the hob comes off easily because there are no grout lines. Avoid scourers, abrasive creams and blades, which can scratch the glass, and do not use cleaners that could seep behind the edges.
Which parts of Devon do you cover for glass splashbacks?
We cover the whole of Devon, including Plymouth, Exeter, Paignton, Torquay and Newton Abbot, and postcode areas EX, PL, TQ. Building rules for glass splashbacks here follow the regulations for England. Enter your postcode on the quote form and we will confirm cover; then a glazier will arrange a free survey before giving you a written quote.
Other glazing services in Devon
- Replacement Glass in Devon
- Misted Glass Repair in Devon
- Emergency Glazing in Devon
- Safety Glass in Devon
- Window Repairs in Devon
- Window Film in Devon
- uPVC Windows in Devon
- Aluminium Windows in Devon
- Sash Windows in Devon
- Composite Doors in Devon
- Bifold Doors in Devon
- Sliding Doors in Devon
- Secondary Glazing in Devon
- Roof Lanterns in Devon
- Glass Balustrades in Devon
- Frameless Glass in Devon
- Shower Screens in Devon
- Bespoke Mirrors in Devon
- Glass Roofs in Devon
- Shopfront Glazing in Devon
- Curtain Walling in Devon
- Glass Partitions in Devon
- Property Glazing in Devon
Get a written quote in Devon
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.