Call 0800 088 6248

Perth & Kinross · Scotland

Misted Glass Repair in Perth & Kinross

Cloudy, streaky double glazing in Perth & Kinross is usually a failed sealed unit, and we can quote to replace it without disturbing the frame.

  • Guide from £155
  • 5 towns covered
  • Postcode areas KY, PH

Get your free quote

Start with your postcode. A glazier will be in touch to arrange a free survey.

By sending this form you agree we can contact you about this enquiry. See our privacy policy for how we use your details.

No obligation. Prefer to talk? Call 0800 088 6248 or WhatsApp us.

Foggy window replacement in Perth & Kinross: what to know

Check the paperwork for your windows before booking. Many sealed units come with a manufacturer guarantee against misting, and if your windows are still covered, the original installer or manufacturer may be responsible for replacing the failed unit under its terms.

Condensation on the room-side surface of the glass is not the same problem. It usually comes from humid indoor air meeting a cold pane and can be wiped away. Only mist trapped between the two panes means the sealed unit itself has failed and needs replacing.

A sealed unit has a spacer bar around its edge filled with desiccant, a drying agent that absorbs any moisture inside the cavity. When the edge seal fails, damp air keeps getting in until the desiccant is saturated, and condensation then forms between the panes where it cannot be wiped off.

The price of replacing misted units depends on the size of each unit, the glass specification, any bars or decorative features, how many units are done together, and access. Several units on one visit usually cost less each than separate visits for single windows.

Window with one misted double glazed pane beside a clear pane

Towns we cover for misted glass repair in Perth & Kinross

Choose your town for local details, nearby areas and the postcode districts we cover.

What applies in Perth & Kinross

Section 4 (Safety) of the Scottish Technical Handbooks covers glazing that people could collide with, such as glass in and beside doors and low-level glazing, where safety glass is needed.

Section 6 (Energy) of the Scottish Technical Handbooks sets the thermal performance that replacement windows, doors and rooflights should achieve.

Parts of Perth & Kinross are within about 9 km of the coast, where exposure to wind and salt air is worth planning for. Salt air and wind-driven rain put extra strain on sealed unit edges in coastal homes. Keeping frame drainage clear and gaskets in good order matters more, and the glazier checks both so the replacement unit is not sitting in trapped water.

Older rural homes may have timber frames or units of non-standard sizes, so careful measuring at the survey matters. Exposed sites with driving rain place more strain on seals, and the glazier checks frame drainage and bead condition before fitting.

Guide prices

Guide prices inc VAT for typical jobs. Remote and island locations are quoted by arrangement. Your written quote fixes the price after measuring.
Typical jobGuide price inc VAT
One misted unit, 600 × 900 mm£155 – £195
Two misted units, 600 × 900 mm£305 – £395
Four misted units, 600 × 1100 mm£685 – £875
Misted unit in a door, toughened£305 – £385

Choosing your misted glass repair

Laminated safety unit

A unit with laminated glass that holds together if broken, useful for ground-floor security and safety in critical locations.

Georgian bar or leaded

Decorative bars or lead designs remade to match the originals so the new unit lines up with neighbouring windows.

Toughened safety unit

Both panes toughened, for misted units in doors, beside doors or low down where safety glass is required.

Like-for-like clear unit

A direct replacement matching the thickness and look of the original unit, for windows where no change in performance is needed.

Misted Glass Repair in Perth & Kinross: questions

Will a new unit match my other windows?

It can. The glazier records the unit thickness, spacer bar colour, any Georgian bars or leaded designs, and the obscure glass pattern if there is one. Most details can be matched closely. If an obscure pattern has been discontinued, the quote offers the closest available alternative so you can decide before anything is ordered.

How much does it cost to replace a misted sealed unit?

The cost depends on the size of the unit, the glass type, any Georgian bars, leaded or obscure features, how many units are done together, and access to the window. Larger units, safety glass and upper-floor windows cost more. See the guide prices for typical sizes, then get a written quote for your exact windows.

Can misted double glazing be fixed without replacing the window?

Yes. In most cases only the sealed unit needs replacing, not the frame. The glazier removes the beads, lifts out the misted unit and fits a new one made to the same thickness. Your frames, hinges, handles and locks stay as they are, provided they are in good condition, which the glazier checks at the survey.

Are misted units covered by a guarantee?

Often they are, for a period after installation. Many sealed unit manufacturers guarantee against misting, and the terms are set out in the paperwork from the original installer. If your units are still covered, contact that installer first. Units we supply carry manufacturer guarantees, and the terms are confirmed in writing with your quote.

Which parts of Perth & Kinross do you cover for misted glass repair?

We cover the whole of Perth & Kinross, including Perth, Blairgowrie, Crieff, Kinross and Pitlochry, and postcode areas KY, PH. Building rules for misted glass repair here follow the regulations for Scotland. Enter your postcode on the quote form and we will confirm cover; then a glazier will arrange a free survey before giving you a written quote.

Get a written quote in Perth & Kinross

Free survey for new glazing, clear guide prices and one point of contact for every glazing job.

CallGet a quote