Call 0800 088 6248

Surrey · England

Misted Glass Repair in Surrey

We can quote for replacing one misted unit or a full set across homes in Surrey, with low-E and obscure upgrades available at the same time.

  • Guide from £155
  • 19 towns covered
  • Postcode areas CR, GU, KT, RH, SM, TW

Get your free quote

Start with your postcode. A glazier will be in touch to arrange a free survey.

By sending this form you agree we can contact you about this enquiry. See our privacy policy for how we use your details.

No obligation. Prefer to talk? Call 0800 088 6248 or WhatsApp us.

Misted window repair in Surrey

Early seal failure often shows only on cold mornings or after rain and clears during the day. As the desiccant fills, the mist lasts longer and white mineral staining can form on the inner faces. Staining inside the unit cannot be removed by cleaning from either side.

If the misted unit is in a door, beside a door or low down near the floor, the replacement should be safety glass. In England, Approved Document K sets out these critical locations, and the replacement unit should meet them even if the original glass did not.

Check the paperwork for your windows before booking. Many sealed units come with a manufacturer guarantee against misting, and if your windows are still covered, the original installer or manufacturer may be responsible for replacing the failed unit under its terms.

The price of replacing misted units depends on the size of each unit, the glass specification, any bars or decorative features, how many units are done together, and access. Several units on one visit usually cost less each than separate visits for single windows.

Window with one misted double glazed pane beside a clear pane

Towns we cover for misted glass repair in Surrey

Choose your town for local details, nearby areas and the postcode districts we cover.

What applies in Surrey

Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.

Approved Document L sets the minimum energy performance for replacement windows and doors in existing homes in England: a U-value of 1.4 W/m²K, or Window Energy Rating band B for windows; doors can instead meet a Door Set Energy Rating (band B, or band C for doors more than 60% glazed); rooflights need 2.2 W/m²K.

Surrey is inland, around 36 km from the nearest coast at its closest point, so salt exposure is rarely a factor.

Older rural homes may have timber frames or units of non-standard sizes, so careful measuring at the survey matters. Exposed sites with driving rain place more strain on seals, and the glazier checks frame drainage and bead condition before fitting.

Guide prices

Guide prices inc VAT for typical jobs. Remote and island locations are quoted by arrangement. Your written quote fixes the price after measuring.
Typical jobGuide price inc VAT
One misted unit, 600 × 900 mm£155 – £195
Two misted units, 600 × 900 mm£305 – £395
Four misted units, 600 × 1100 mm£685 – £875
Misted unit in a door, toughened£305 – £385

Choosing your misted glass repair

Low-E upgrade unit

A coated pane and gas-filled cavity that reduce heat loss compared with older plain glass units, fitted in the same frame.

Obscure glass unit

Patterned glass for bathrooms, landings and front doors, chosen to match existing obscure panes or to add privacy.

Like-for-like clear unit

A direct replacement matching the thickness and look of the original unit, for windows where no change in performance is needed.

Toughened safety unit

Both panes toughened, for misted units in doors, beside doors or low down where safety glass is required.

Misted Glass Repair in Surrey: questions

Why has condensation appeared between my double glazing panes?

Condensation between the panes means the edge seal of the sealed unit has failed. Damp air has got into the cavity, and the drying agent in the spacer bar can no longer absorb it. The cause is often age, water sitting in the frame, poor packing or strong sun on the frame. The fix is to replace the sealed unit.

How long does it take to replace a misted unit?

There are usually two visits. The first is a survey to measure each unit. The second is fitting, once the new units have been made to order. Fitting usually takes a short time per window, with little mess. Your quote sets out when the units are expected, and we will tell you honestly when a glazier can attend.

Are misted units covered by a guarantee?

Often they are, for a period after installation. Many sealed unit manufacturers guarantee against misting, and the terms are set out in the paperwork from the original installer. If your units are still covered, contact that installer first. Units we supply carry manufacturer guarantees, and the terms are confirmed in writing with your quote.

Can misted double glazing be fixed without replacing the window?

Yes. In most cases only the sealed unit needs replacing, not the frame. The glazier removes the beads, lifts out the misted unit and fits a new one made to the same thickness. Your frames, hinges, handles and locks stay as they are, provided they are in good condition, which the glazier checks at the survey.

Which parts of Surrey do you cover for misted glass repair?

We cover the whole of Surrey, including Woking, Guildford, Esher, Redhill and Staines, and postcode areas CR, GU, KT, RH, SM, TW. Building rules for misted glass repair here follow the regulations for England. Enter your postcode on the quote form and we will confirm cover; then a glazier will arrange a free survey before giving you a written quote.

Get a written quote in Surrey

Free survey for new glazing, clear guide prices and one point of contact for every glazing job.

CallGet a quote