Tenby · Dyfed
Property Glazing in Tenby
Do you manage rented homes in Tenby? We cover reactive glass repairs, boarding and safety glass upgrades with a quote for each job.
- SA70
- SA69
- Guide from £165
Tenby: landlord glass repairs
A planned glazing survey checks each property for unmarked glass in critical locations, misted units, cracked panes, failed hinges and locks, and missing restrictors. The resulting schedule lets you budget and prioritise, rather than reacting to faults one at a time.
When a property needs to be made safe after a break-in or damage, the first visit removes loose glass and boards or temporarily glazes the opening. The permanent glass is measured, quoted and fitted on a second visit, and both stages are reported against the same job.
The cost of property glazing work depends on the job type, glass specification, size and number of panes, access, whether boarding is needed first, and whether visits are reactive or planned. Grouping planned work across several properties usually reduces travel and set-up time per job.
Tenant access is often the biggest cause of delay. With your permission, we contact tenants directly to arrange a convenient time, confirm the visit in writing and report back if access is refused, so you have a clear record of every attempt to complete the job.
Included as standard
- One point of contact for all glazing jobs
- Invoice matching the approved quote
- Tenant access arranged directly when you authorise
- Written quote per job with your reference
About Tenby for this job
- Postcodes covered
- SA70, SA69 and the surrounding area, including Pembroke Dock, Milford Haven and Haverfordwest
- Coast
- Tenby is about 1 km from the coast or a tidal estuary, so salt air and wind-driven rain are worth planning for. Coastal portfolios see more salt corrosion on window hardware and more strain on seals from wind-driven rain. Planned checks on hinges, locks and sealed units help spot problems early, especially in seafront flats and holiday lets.
- Daylight and sun
- In Tenby the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. South and west-facing flats can overheat and suffer glare, which tenants often report. Solar control glass or film is an option on replacement, and checking for condensation on north-facing windows helps spot ventilation issues in colder months.
- Access and setting
- Rural portfolios can spread across a wide area, so grouping jobs and planned surveys saves visits. Older cottages often have timber windows and non-standard glass sizes, which the glazier measures carefully before ordering replacements.
- Rules in Wales
- In Wales, Approved Document N covers safety glazing: safety glass is needed in and around doors and in low-level glazing where people could walk into it.
Guide prices in Tenby
| Typical job | Guide price inc VAT |
|---|---|
| Replace a standard sealed unit | £165 – £205 |
| Toughened door unit | £345 – £435 |
| Board up, then glaze (one window) | £315 – £405 |
Get a guide price for your size
Where a window is an escape route, its replacement in Wales should give at least the same escape opening as before.
Options to choose between
Planned glazing survey
A property-by-property check of glass, safety marking, seals, hinges and locks, giving a schedule of work to budget and prioritise.
Reactive repairs
Broken, cracked or misted glass and faulty windows or doors repaired as jobs are raised, with a written quote for each job.
Void property works
Glass, locks, cylinders and window hardware checked and repaired between tenancies, so the property is ready to let.
Property Glazing in Tenby: questions
Do you provide a quote for each job before work starts?
Yes. Every job gets a written quote that fixes the price for the specification shown, carrying your reference if you give one. For make-safe work, we confirm the boarding cost before or at the visit, then quote for the permanent glass. Any extra work found on site is quoted separately and only done once approved.
Do you work on communal areas and commercial premises?
Yes. We cover communal entrance doors, stairwell windows and glazed screens in blocks and HMOs, as well as offices and shops managed by agents and facilities teams. Large communal panels often need laminated or toughened glass and careful planning for access, so these jobs normally start with a survey.
Can you help with void properties between tenancies?
Yes. Between tenancies, a glazier can check and repair broken or misted glass, replace damaged locks and cylinders, fix hinges and handles, and fit restrictors where needed. The work is reported with photos, giving a clear record of the property's glazing condition at the start of the next tenancy.
How do we raise a glazing job for one of our properties?
Send the job by form, phone, email or WhatsApp with the property address, a description of the problem, access details, a tenant or site contact, and any photos. Add your order reference if you use one. We confirm the job, arrange a glazier to survey or make safe, and send a written quote that carries your reference.
Do you cover Tenby for property glazing?
Yes. We can quote for property glazing across Tenby and the surrounding Dyfed area, including postcode districts SA70 and SA69, and nearby Pembroke Dock, Milford Haven and Haverfordwest. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Tenby
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.