Call 0800 088 6248

Tenby · Dyfed

uPVC Windows in Tenby

Looking for uPVC windows in Tenby? We can quote for white, coloured and woodgrain frames, with casement, tilt and turn or sliding sash openings to suit your home.

  • SA70
  • SA69
  • Guide from £565

Get your free quote

Start with your postcode. A glazier will be in touch to arrange a free survey.

By sending this form you agree we can contact you about this enquiry. See our privacy policy for how we use your details.

No obligation. Prefer to talk? Call 0800 088 6248 or WhatsApp us.

White uPVC windows in Tenby: what to know

Bay windows need extra care. Some older bays carry load from the wall or roof above, so the glazier checks the support before removal and may fit bay poles or ask for structural advice. Replacing a window in the same opening is different from widening it, which needs a new lintel.

Windows are replaced room by room, so each opening is only exposed for a short spell. A single window is usually changed within a day, and a typical house takes a few days depending on the number of windows, bays and access. Inside, reveals are finished with trims, sealant or filler.

uPVC no longer means white only. Frames can be foiled in woodgrain or solid colours such as grey, black or cream, often outside only with white inside. Foils are bonded at the factory and should be cleaned with a soft cloth and mild detergent, because abrasive pads and solvents mark the surface.

uPVC frames need washing a few times a year with warm soapy water and a drop of light oil on hinges and locking points. Drainage slots along the bottom of the outer frame let rainwater escape, so keep them clear of dirt and leaves to stop water collecting in the cill.

What a typical job includes

  • Written guarantee terms and advice on building regulations sign-off
  • Sealing inside and out, with trims to make good
  • Removal and disposal of the old windows
  • Fitting, packing and fixing into the existing opening
Semi-detached house with white uPVC windows and bay windows

About Tenby for this job

Postcodes covered
SA70, SA69 and the surrounding area, including Pembroke Dock, Milford Haven and Haverfordwest
Coast
Tenby is about 1 km from the coast or a tidal estuary, so salt air and wind-driven rain are worth planning for. Near the coast, salt spray and wind-driven rain test seals, drainage and hardware. uPVC itself does not corrode, but stainless or coated locking parts, well-sealed joints around the frame and clear drainage slots matter, and exposed elevations may need frames with higher weather ratings.
Daylight and sun
In Tenby the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. uPVC frames are bulkier than aluminium, so they take a little more glass area from small windows. On south and west elevations, solar-control or neutral low-E glass limits overheating, while north-facing rooms benefit from high light-transmission glass and warm-edge spacers that reduce condensation.
Access and setting
Older rural cottages often have irregular openings, thick walls and timber lintels, so every frame is measured individually and the support above each opening is checked. Exposed hillside and open-field sites benefit from reinforced frames and careful sealing against driving rain.
Rules in Wales
In Wales, Approved Document N covers safety glazing: safety glass is needed in and around doors and in low-level glazing where people could walk into it.

Guide prices in Tenby

Guide prices inc VAT for typical jobs. Remote and island locations are quoted by arrangement. Your written quote fixes the price after measuring.
Typical jobGuide price inc VAT
Casement window, 900 × 1050 mm£565 – £725
Casement window, 1200 × 1200 mm£665 – £855
Large window, 1800 × 1200 mm£805 – £995
Anthracite or woodgrain, 1200 × 1200 mm£785 – £995

Get a guide price for your size

Wales sets its own energy standards in the Welsh Approved Document L. Replacement windows, doors and rooflights must meet the limiting values set there, which your quote will reference.

What you can choose

Casement windows

Side-hung or top-hung sashes on friction hinges, suiting most houses, with easy-clean hinges that let upper-floor glass be cleaned from inside.

Georgian or astragal bars

Bars set between the panes or applied to the faces of the glass for a traditional divided-pane look.

Obscure and acoustic glass

Patterned or satin glass for bathrooms and street-facing rooms, and laminated acoustic glass to reduce traffic noise.

uPVC Windows in Tenby: questions

How long does it take to fit uPVC windows?

Most single windows are changed within a day, and a typical house usually takes a few days. Bays, large picture windows and openings that need a tower or scaffold take longer. Manufacturing comes first, because every frame is made to the survey measurements, and the lead time is confirmed with your quote.

Can I fit uPVC windows myself?

You can, but the work still has to meet building regulations. In England and Wales, without an installer registered with a competent person scheme you need building control approval and inspection. Accurate measuring, correct packing, fixing and sealing all affect weather performance and how the locks work, and mistakes are hard to put right because frames are made to size and cannot be returned.

What guarantee comes with new uPVC windows?

Manufacturer guarantees apply to new frames, sealed units and hardware, and the terms are confirmed in writing. Guarantee terms for the installation are set out in writing with your quote, so you know what is covered and for how long before you commit. Keep this paperwork with your building regulations certificate, because buyers' solicitors usually ask for both.

Will fitting new windows damage my plaster or decor?

Some disturbance is normal, but it is usually limited to the edges of each opening. The glazier cuts out the old frame, fits the new one and finishes the inside with trims, sealant or filler. Older frames set deep into plaster may need some plaster repair, and we flag that at survey so it is covered in the quote.

Do you cover Tenby for uPVC windows?

Yes. We can quote for uPVC windows across Tenby and the surrounding Dyfed area, including postcode districts SA70 and SA69, and nearby Pembroke Dock, Milford Haven and Haverfordwest. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.

Get a written quote in Tenby

Free survey for new glazing, clear guide prices and one point of contact for every glazing job.

CallGet a quote