Bordon · Hampshire
Replacement Glass in Bordon
We can quote for replacement glass across Bordon and Hampshire, from a single cracked pane to a full set of upgraded low-E sealed units.
- GU35
- Guide from £135
About replacement window glass in Bordon
Units with Georgian bars or leaded designs can be remade to match the originals. The glazier notes the bar width, colour and layout, or the lead pattern, so the new unit lines up with neighbouring windows. Bars fitted inside the cavity are protected from dirt and need no separate cleaning.
Many modern windows are internally beaded, which makes it harder to remove glass from outside. If your windows have external beads, ask about security glazing tape or clips when the glass is replaced, as these make it more difficult for beads to be prised off from outside.
In England, Approved Document K treats glass in a door or within 300mm of a door edge, up to 1500mm above the floor, and any other glass within 800mm of the floor as critical locations. Replacement glass in these areas should be safety glass, even where the old pane was not.
Older sealed units often have plain float glass on both sides. A replacement unit can use a low-emissivity coated pane and a gas-filled cavity, which reduces heat loss through the glass without changing the frame. The coating faces into the cavity and is not noticeable in normal use.
What a typical job includes
- Written quote fixing the price for the specification
- Removal of old glass and packaging from site
- Fitting on glazing packers with the beads refitted
- Made-to-measure glass or sealed unit to suit the frame
Bordon at a glance
- Postcodes covered
- GU35 and the surrounding area, including Farnham, Aldershot and Fleet
- Coast
- Bordon is well inland, around 30 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Bordon the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.7 hours of daylight, rising to about 62° and 16.3 hours in midsummer. On south and west elevations, a solar control or low-E coating changes how much heat and glare new glass lets in. North-facing rooms usually benefit more from glass that keeps heat in while admitting as much daylight as possible.
- Access and setting
- Older rural properties often have timber frames, small panes or leaded lights that need careful measuring and hand-made units. Panes in exposed spots may need thicker glass, and the survey confirms every detail so the fitting visit runs smoothly.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Bordon
| Typical job | Guide price inc VAT |
|---|---|
| Small double glazed unit, 500 × 700 mm | £135 – £175 |
| Standard unit, 600 × 900 mm | £165 – £205 |
| Large unit, 1200 × 1200 mm | £285 – £365 |
| Toughened unit for a door, 750 × 1800 mm | £345 – £435 |
| Triple glazed unit, 600 × 900 mm | £235 – £305 |
Get a guide price for your size
Listed buildings in England need listed building consent for most changes to historic windows or glass, and conservation areas can restrict changes visible from the street. Speak to the council's conservation officer before ordering.
What you can choose
Toughened safety glass
Heat-treated glass that breaks into small, relatively blunt pieces, used in doors, low-level panes and other critical locations.
Low-E energy unit
A coated pane and gas-filled cavity that reduce heat loss through the glass compared with older plain float glass units.
Standard double glazed unit
Two panes of float glass with a sealed cavity, suitable where safety glass is not required and no special performance is needed.
Replacement Glass in Bordon: questions
Does replacing window glass need building regulations approval?
Replacing only the glass in an existing frame is normally treated as a repair in England and does not need to be notified. Replacing the whole window is different and must go through building control or a competent person scheme. Even for glass-only work, safety glass should be used in critical locations, and the detail of the rules differs between UK nations.
What affects the cost of replacement glass?
The main factors are the size of the pane, the glass type and thickness, and whether it is a single pane or a sealed unit. Toughened, laminated, acoustic and decorative units cost more than standard float glass. Access also matters, as upper-floor or awkward panes take longer to fit safely. See the guide prices for typical sizes, then get a written quote for your exact job.
How long does it take to get replacement glass fitted?
There are usually two stages: a survey to measure, then a fitting visit once the glass has been made. Toughened glass and sealed units are manufactured to order, so they cannot be cut from stock while the glazier waits. Fitting itself usually takes a short time per window. Your quote will set out when the glass is expected, and we will tell you honestly when a glazier can attend.
Can I replace a sealed unit myself?
Single panes in simple frames are sometimes replaced by confident DIYers, but sealed units and safety glass carry risks. A unit that is not packed correctly can make an opening sash drop or crack under load, and handling large panes is hazardous. A glazier also checks whether safety glass is required and that the new glass carries the correct marking.
Do you cover Bordon for replacement glass?
Yes. We can quote for replacement glass across Bordon and the surrounding Hampshire area, including postcode districts GU35, and nearby Farnham, Aldershot and Fleet. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Bordon
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.