Fleet · Hampshire
Replacement Glass in Fleet
Cracked or broken glass in Fleet can usually be replaced without changing the frame, and our glaziers can quote for single panes and sealed units.
- GU13
- GU51
- GU52
- Guide from £135
Double glazing glass replacement in Fleet: what to know
In England, Approved Document K treats glass in a door or within 300mm of a door edge, up to 1500mm above the floor, and any other glass within 800mm of the floor as critical locations. Replacement glass in these areas should be safety glass, even where the old pane was not.
Many modern windows are internally beaded, which makes it harder to remove glass from outside. If your windows have external beads, ask about security glazing tape or clips when the glass is replaced, as these make it more difficult for beads to be prised off from outside.
Older sealed units often have plain float glass on both sides. A replacement unit can use a low-emissivity coated pane and a gas-filled cavity, which reduces heat loss through the glass without changing the frame. The coating faces into the cavity and is not noticeable in normal use.
Acoustic laminated glass uses a special interlayer that dampens sound passing through the pane. Using two different glass thicknesses in a sealed unit also helps, because each pane resonates at a different frequency. Both can be fitted in an existing frame, though the frame and its seals also affect how much noise gets through.
What a typical job includes
- Survey and measurement of the existing glass or unit
- Fitting on glazing packers with the beads refitted
- Written quote fixing the price for the specification
- Removal of old glass and packaging from site
Local details for Fleet
- Postcodes covered
- GU13, GU51, GU52 and the surrounding area, including Farnborough, Aldershot and Yateley
- Coast
- Fleet is well inland, around 49 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Fleet the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. On south and west elevations, a solar control or low-E coating changes how much heat and glare new glass lets in. North-facing rooms usually benefit more from glass that keeps heat in while admitting as much daylight as possible.
- Access and setting
- Older rural properties often have timber frames, small panes or leaded lights that need careful measuring and hand-made units. Panes in exposed spots may need thicker glass, and the survey confirms every detail so the fitting visit runs smoothly.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Fleet
| Typical job | Guide price inc VAT |
|---|---|
| Small double glazed unit, 500 × 700 mm | £135 – £175 |
| Standard unit, 600 × 900 mm | £165 – £205 |
| Large unit, 1200 × 1200 mm | £285 – £365 |
| Toughened unit for a door, 750 × 1800 mm | £345 – £435 |
| Triple glazed unit, 600 × 900 mm | £235 – £305 |
Get a guide price for your size
Approved Document L sets the minimum energy performance for replacement windows and doors in existing homes in England: a U-value of 1.4 W/m²K, or Window Energy Rating band B for windows; doors can instead meet a Door Set Energy Rating (band B, or band C for doors more than 60% glazed); rooflights need 2.2 W/m²K.
Specification choices
Standard double glazed unit
Two panes of float glass with a sealed cavity, suitable where safety glass is not required and no special performance is needed.
Toughened safety glass
Heat-treated glass that breaks into small, relatively blunt pieces, used in doors, low-level panes and other critical locations.
Laminated glass
Two sheets of glass bonded to an interlayer that holds the pieces in place if it breaks, adding safety and security.
Replacement Glass in Fleet: questions
What guarantee comes with replacement glass?
Manufacturer guarantees apply to new sealed units and glass, and the terms are confirmed in writing. Guarantee terms for the fitting are set out in writing with your quote. Keep the paperwork with your property records, as it identifies the unit and its specification if anything needs to be checked or claimed later.
Can you match obscure glass to my other windows?
Usually, yes. Obscure glass is made in many patterns, and the glazier can often identify yours from a photo or at the survey. Some older patterns are no longer made. If yours has been discontinued, the quote will offer the closest current pattern, or you can replace a matching set of panes so they all look the same.
Should I upgrade to low-E glass when replacing a unit?
If the existing unit is plain float glass, a low-emissivity unit is worth considering because it reduces heat loss through the glass and keeps the inner pane warmer, which can reduce condensation on the room side. It fits the same frame, provided the overall thickness matches. The quote can show standard and low-E options side by side.
Can I replace a sealed unit myself?
Single panes in simple frames are sometimes replaced by confident DIYers, but sealed units and safety glass carry risks. A unit that is not packed correctly can make an opening sash drop or crack under load, and handling large panes is hazardous. A glazier also checks whether safety glass is required and that the new glass carries the correct marking.
Do you cover Fleet for replacement glass?
Yes. We can quote for replacement glass across Fleet and the surrounding Hampshire area, including postcode districts GU13, GU51 and GU52, and nearby Farnborough, Aldershot and Yateley. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Fleet
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.