Fleet · Hampshire
Property Glazing in Fleet
Facilities teams in Fleet can use us for glazing in offices, shops and communal areas, from make-safe boarding to planned glass surveys.
- GU13
- GU51
- GU52
- Guide from £165
About planned glazing maintenance in Fleet
Flats, HMOs and blocks often have communal entrance doors and screens with large glass panels. These see heavy use and impact, so laminated or toughened glass and solid door closers matter. Planned checks on communal glazing reduce the risk of sudden failures.
Each job is raised with the property address, access arrangements, a contact for the tenant or site, and photos if available. Clear job details let the glazier bring the right materials and boarding, and help avoid a wasted visit when keys or access have not been arranged.
After each job, you receive photos of the before and after condition, the glass specification fitted, and a short note of any other defects seen. This creates a record for the property file, supports insurance claims and can help when deposits or disputes need evidence.
For workplaces, communal areas and offices, the Workplace (Health, Safety and Welfare) Regulations require windows, glazed doors and transparent partitions to be of safety material or protected against breakage where needed for health or safety, and to be marked so they are apparent.
What's included
- Make-safe boarding and permanent glass where needed
- One point of contact for all glazing jobs
- Before and after photos with a short report
- Written quote per job with your reference
Working in Fleet
- Postcodes covered
- GU13, GU51, GU52 and the surrounding area, including Farnborough, Aldershot and Yateley
- Coast
- Fleet is well inland, around 49 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Fleet the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. South and west-facing flats can overheat and suffer glare, which tenants often report. Solar control glass or film is an option on replacement, and checking for condensation on north-facing windows helps spot ventilation issues in colder months.
- Access and setting
- Rural portfolios can spread across a wide area, so grouping jobs and planned surveys saves visits. Older cottages often have timber windows and non-standard glass sizes, which the glazier measures carefully before ordering replacements.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Fleet
| Typical job | Guide price inc VAT |
|---|---|
| Replace a standard sealed unit | £165 – £205 |
| Toughened door unit | £345 – £435 |
| Board up, then glaze (one window) | £315 – £405 |
Get a guide price for your size
Approved Document B covers escape windows. Where an existing window is an escape route, typically in first-floor bedrooms, its replacement should give at least the same escape opening as before.
Options to choose between
Make-safe and boarding
Loose glass removed and openings boarded or temporarily glazed, followed by permanent glass on a second visit.
Safety glass upgrades
Replacing unmarked glass in doors, side panels and low-level panes with toughened or laminated safety glass.
Void property works
Glass, locks, cylinders and window hardware checked and repaired between tenancies, so the property is ready to let.
Property Glazing in Fleet: questions
Do you work on communal areas and commercial premises?
Yes. We cover communal entrance doors, stairwell windows and glazed screens in blocks and HMOs, as well as offices and shops managed by agents and facilities teams. Large communal panels often need laminated or toughened glass and careful planning for access, so these jobs normally start with a survey.
How much does glazing work for landlords cost?
The cost depends on the type of job, glass specification, size and number of panes, access, any boarding needed first, and whether the work is reactive or planned. Grouping planned jobs across properties usually reduces cost per job. See the guide prices for typical work, and every job has its own written quote.
How do we raise a glazing job for one of our properties?
Send the job by form, phone, email or WhatsApp with the property address, a description of the problem, access details, a tenant or site contact, and any photos. Add your order reference if you use one. We confirm the job, arrange a glazier to survey or make safe, and send a written quote that carries your reference.
Can you arrange access with our tenants directly?
Yes, if you authorise it. We contact the tenant to arrange a suitable time, confirm the appointment in writing and keep you updated. If access is refused or the tenant is not in, we report back with the dates and times of each attempt, so you have a clear record for your property file.
Do you cover Fleet for property glazing?
Yes. We can quote for property glazing across Fleet and the surrounding Hampshire area, including postcode districts GU13, GU51 and GU52, and nearby Farnborough, Aldershot and Yateley. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Fleet
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.