Corby · Northamptonshire
Replacement Glass in Corby
In Corby, a broken or outdated pane does not have to mean new windows, because we can quote to replace the glass and keep the frame.
- NN17
- NN18
- Guide from £135
Replacement sealed units in Corby: what to know
Fitting a replacement unit is usually a short visit per window once the glass has been made. The beads are eased out, the old unit lifted out, the rebate cleaned, and the new unit set on glazing packers to support its weight and keep any opening sash square before the beads go back.
In England, Approved Document K treats glass in a door or within 300mm of a door edge, up to 1500mm above the floor, and any other glass within 800mm of the floor as critical locations. Replacement glass in these areas should be safety glass, even where the old pane was not.
Units with Georgian bars or leaded designs can be remade to match the originals. The glazier notes the bar width, colour and layout, or the lead pattern, so the new unit lines up with neighbouring windows. Bars fitted inside the cavity are protected from dirt and need no separate cleaning.
Sealed units are made to measure, so the glazier records the width, height and overall thickness of the existing unit rather than the frame opening. The new unit has to match that thickness to sit correctly in the rebate and take the original beads, otherwise the seal and security of the pane suffer.
What a typical job includes
- Fitting on glazing packers with the beads refitted
- Made-to-measure glass or sealed unit to suit the frame
- Survey and measurement of the existing glass or unit
- Removal of the old pane and cleaning of the rebate
Local details for Corby
- Postcodes covered
- NN17, NN18 and the surrounding area, including Uppingham, Kettering and Market Harborough
- Coast
- Corby is well inland, around 66 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Corby the midwinter sun reaches about 14° above the horizon at noon, with roughly 7.4 hours of daylight, rising to about 61° and 16.6 hours in midsummer. On south and west elevations, a solar control or low-E coating changes how much heat and glare new glass lets in. North-facing rooms usually benefit more from glass that keeps heat in while admitting as much daylight as possible.
- Access and setting
- In towns and cities, replacing glass in flats or above shops often means planning parking, stair access and lifting large units safely. Laminated glass suits ground-floor windows, acoustic glass helps on busy roads, and conservation areas may need matching patterns.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Corby
| Typical job | Guide price inc VAT |
|---|---|
| Small double glazed unit, 500 × 700 mm | £135 – £175 |
| Standard unit, 600 × 900 mm | £165 – £205 |
| Large unit, 1200 × 1200 mm | £285 – £365 |
| Toughened unit for a door, 750 × 1800 mm | £345 – £435 |
| Triple glazed unit, 600 × 900 mm | £235 – £305 |
Get a guide price for your size
Listed buildings in England need listed building consent for most changes to historic windows or glass, and conservation areas can restrict changes visible from the street. Speak to the council's conservation officer before ordering.
Options to choose between
Georgian bar or leaded unit
Decorative bars or lead designs inside or on the glass, matched to existing windows for a consistent look across the property.
Standard double glazed unit
Two panes of float glass with a sealed cavity, suitable where safety glass is not required and no special performance is needed.
Toughened safety glass
Heat-treated glass that breaks into small, relatively blunt pieces, used in doors, low-level panes and other critical locations.
Replacement Glass in Corby: questions
How long does it take to get replacement glass fitted?
There are usually two stages: a survey to measure, then a fitting visit once the glass has been made. Toughened glass and sealed units are manufactured to order, so they cannot be cut from stock while the glazier waits. Fitting itself usually takes a short time per window. Your quote will set out when the glass is expected, and we will tell you honestly when a glazier can attend.
Can I replace a sealed unit myself?
Single panes in simple frames are sometimes replaced by confident DIYers, but sealed units and safety glass carry risks. A unit that is not packed correctly can make an opening sash drop or crack under load, and handling large panes is hazardous. A glazier also checks whether safety glass is required and that the new glass carries the correct marking.
Can you match obscure glass to my other windows?
Usually, yes. Obscure glass is made in many patterns, and the glazier can often identify yours from a photo or at the survey. Some older patterns are no longer made. If yours has been discontinued, the quote will offer the closest current pattern, or you can replace a matching set of panes so they all look the same.
What guarantee comes with replacement glass?
Manufacturer guarantees apply to new sealed units and glass, and the terms are confirmed in writing. Guarantee terms for the fitting are set out in writing with your quote. Keep the paperwork with your property records, as it identifies the unit and its specification if anything needs to be checked or claimed later.
Do you cover Corby for replacement glass?
Yes. We can quote for replacement glass across Corby and the surrounding Northamptonshire area, including postcode districts NN17 and NN18, and nearby Uppingham, Kettering and Market Harborough. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Corby
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.