Gloucestershire · England

Roof Lanterns in Gloucestershire

Homeowners in Gloucestershire can get a written roof lantern quote that fixes the price for the size, shape, glass, colour and vents shown.

Guide from £1,095
8 towns covered
Postcode areas BS, GL

Roof lantern replacement across Gloucestershire

The Rooflight Association recommends laminated glass for the inner pane of glass rooflights, because laminated glass stays bonded together if it breaks instead of dropping fragments into the room below. Toughened inner panes are still used, but laminated is the safer choice over kitchens, stairs and seating areas.

Opening skylights and lantern vents can be manual or electrically operated, often with a rain sensor that closes them automatically when it starts to rain. Electric vents need a power supply planned before plastering, so the wiring route is agreed at survey when an opening option is chosen.

Glass for lanterns usually comes with a self-cleaning outer coating that helps rain wash away dirt, and a choice of clear, neutral or blue-tinted solar-control glass. Solar-control glass limits heat build-up under a south-facing lantern, while clear low-E glass suits shaded or north-facing rooms.

In England, a rooflight on a house is usually permitted development if it projects no more than 150mm beyond the roof plane and is no higher than the highest part of the roof. Raised lanterns often stand taller than that, so check with the council before ordering.

Roof lantern above a kitchen island in an open-plan extension

Towns we cover for roof lanterns in Gloucestershire

Choose your town for local details, nearby areas and the postcode districts we cover.

What applies in Gloucestershire

Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.

Listed buildings in England need listed building consent for most changes to historic windows or glass, and conservation areas can restrict changes visible from the street. Speak to the council's conservation officer before ordering.

Parts of Gloucestershire are within about 14 km of the coast, where exposure to wind and salt air is worth planning for. Coastal lanterns face salt deposits on the glass and frames and strong uplift from wind on exposed roofs. Marine-grade coatings, stainless fixings and secure fixing to a well-built upstand matter, and salt film may need rinsing more often than self-cleaning glass manages alone.

Rural roofs collect more leaves, moss and bird debris, so lanterns need clear upstand drainage and regular checks. Exposed sites see higher wind loads and driving rain, and older outbuildings may need the roof structure strengthening before a lantern is added.

Guide prices

Guide prices inc VAT for typical jobs. Remote and island locations are quoted by arrangement. Your written quote fixes the price after measuring.
Typical job	Guide price inc VAT
Lantern 1500 × 1000 mm, fitted to a kerb	£1,395 – £1,795
Lantern 2000 × 1000 mm	£1,695 – £2,095
Lantern 3000 × 1500 mm	£2,795 – £3,695
Flat glass rooflight 1000 × 1000 mm	£1,095 – £1,395

Choosing your roof lanterns

Square or octagonal lantern

A pyramid or eight-sided design that suits square rooms, orangeries and spaces where a central focal point is wanted.

Frame colours

Powder-coated aluminium in grey, black, white or other RAL colours, often dual colour to suit the roof and the room.

Opening vents

Manual or electric vents in the lantern or skylight, with optional rain sensors that close them automatically in wet weather.

Rectangular hipped lantern

A long ridge with hipped ends, suiting most rectangular extensions and kitchens, sized to the opening and the room below.

Roof Lanterns in Gloucestershire: questions

How much does a roof lantern cost?

The cost of a roof lantern depends on its size and shape, the glass specification, frame colour, any opening vents, and whether the upstand exists or needs building. Access to the roof and lifting a large lantern also affect labour. See the guide prices for typical ranges; the written quote fixes the price for your exact specification.

How long does it take to fit a roof lantern?

Fitting a roof lantern on a prepared upstand usually takes a day or less for a typical size, longer for large or complex shapes. The lantern is made to order first, and the lead time depends on its size, shape and colour. Building or rebuilding an upstand is separate roofing work that comes before fitting.

Does fitting a roof lantern need building regulations approval?

A new roof lantern or skylight generally needs building regulations approval, because the roof structure is cut and must be supported, and the unit must meet energy standards. Fire performance also matters near a boundary. Replacing a lantern on an existing sound upstand is simpler, and we explain which route applies at survey.

Do I need planning permission for a roof lantern?

Sometimes. In England, rooflights on a house are usually permitted development if they project no more than 150mm above the roof plane and are no higher than the highest part of the roof. Raised lanterns often exceed that, and flats, listed buildings and conservation areas have extra controls, so check with your council first.

Which parts of Gloucestershire do you cover for roof lanterns?

We cover the whole of Gloucestershire, including Gloucester, Cheltenham, Stroud, Kingswood and Mangotsfield, and postcode areas BS, GL. Building rules for roof lanterns here follow the regulations for England. Enter your postcode on the quote form and we will confirm cover; then a glazier will arrange a free survey before giving you a written quote.

Other glazing services in Gloucestershire

All glazing in Gloucestershire · Roof Lanterns & Skylights across the UK

Get a written quote in Gloucestershire

Free survey for new glazing, clear guide prices and one point of contact for every glazing job.

Get a guide price 0800 088 6248 WhatsApp