Call 0800 088 6248

Gloucestershire · England

Shower Screens in Gloucestershire

Is a chipped or sagging shower door bothering you in Gloucestershire? We can measure, remake and refit the glass, and check the hinges and wall fixings at the same time.

  • Guide from £395
  • 8 towns covered
  • Postcode areas BS, GL

Get your free quote

Start with your postcode. A glazier will be in touch to arrange a free survey.

By sending this form you agree we can contact you about this enquiry. See our privacy policy for how we use your details.

No obligation. Prefer to talk? Call 0800 088 6248 or WhatsApp us.

Wet room glass panel in Gloucestershire: what to know

Hinges carry the full weight of a glass door, so they must fix into solid backing. Tiled plasterboard or stud walls usually need timber noggins or suitable heavy-duty fixings behind the hinge positions, which is easier to arrange before tiling than afterwards.

The glass screen stops spray, but it is not the waterproofing. The tanking behind the tiles, the tray or floor fall and the drain do that job. Clear silicone along the glass edges then seals the joints, and it needs time to cure before the shower is used.

The price depends mainly on panel sizes, the number of panels, glass thickness, the hinge and bracing hardware, and any cut-outs for sloping ceilings, trays or skirting. Low-iron or satin glass, an easy-clean coating and special finishes add cost. See the guide prices for typical ranges.

Shower screen glass is toughened safety glass made to BS EN 12150. It is heated and then quickly cooled during manufacture, which makes it much stronger than ordinary glass and means that if it does break, it breaks into small, blunt pieces rather than sharp shards.

Frameless walk-in shower screen with black fittings in a tiled bathroom

Towns we cover for shower screens in Gloucestershire

Choose your town for local details, nearby areas and the postcode districts we cover.

What applies in Gloucestershire

Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.

Parts of Gloucestershire are within about 14 km of the coast, where exposure to wind and salt air is worth planning for. Shower glass sits indoors, so salt air has little effect on it, but coastal homes can have damp, humid air that slows drying. Good bathroom ventilation and a quick squeegee after use help prevent mould on the silicone and marks on the hardware.

Older rural homes often have uneven walls, sloping ceilings and timber floors that flex, all of which shape the screen design. Hard water is common in some areas, so an easy-clean coating and regular squeegeeing help keep the glass clear.

Guide prices

Guide prices inc VAT for typical jobs. Remote and island locations are quoted by arrangement. Your written quote fixes the price after measuring.
Typical jobGuide price inc VAT
Walk-in shower panel£395 – £695
Hinged door with in-line panel£795 – £1,295
Corner or full enclosure£995 – £1,595

Choosing your shower screens

Satin or tinted glass

Satin bands, full satin panels or grey and bronze tints that add privacy or style while still letting light into the shower.

Over-bath screen

A fixed or hinged toughened glass panel on the bath edge, made to measure for baths that sit against sloping ceilings or uneven walls.

Easy-clean coating

A water-repellent coating bonded to the glass that helps water bead and run off, reducing limescale and the time spent cleaning.

Walk-in wet room panel

A single fixed glass panel with a bracing bar or floor channel, leaving an open entry and no door to clean or adjust.

Shower Screens in Gloucestershire: questions

How long does it take to fit a shower screen?

Most shower screens are fitted in a single visit once the glass has been made, which usually takes a couple of weeks after measuring. The silicone then needs time to cure, so you should wait before using the shower, and we tell you how long on the day. Your quote confirms the expected timescale.

How do I stop limescale building up on shower glass?

The simplest habit is to squeegee the glass after every shower so water does not dry on it. Clean weekly with a mild, non-abrasive bathroom cleaner and a soft cloth, and rinse well. Avoid scouring pads, powders and strong descalers, which can scratch coatings, dull hinge finishes and break down silicone seals.

When should my shower screen be measured?

Your screen should be measured once the walls are tiled and the tray or wet room floor is finished. The glass is made to follow the exact angles of the finished surfaces, and tiles, adhesive and trims all change the dimensions. If you are mid-renovation, we can advise on fixing positions and backing before tiling starts.

Is a chipped shower screen safe to keep using?

A chip on the edge of toughened glass can weaken the whole panel, because the surface is under stress and damage at the edge can lead to sudden breakage. It is safer to stop using that door or panel and have it replaced. We can remake it from the original measurements or a fresh template.

Which parts of Gloucestershire do you cover for shower screens?

We cover the whole of Gloucestershire, including Gloucester, Cheltenham, Stroud, Kingswood and Mangotsfield, and postcode areas BS, GL. Building rules for shower screens here follow the regulations for England. Enter your postcode on the quote form and we will confirm cover; then a glazier will arrange a free survey before giving you a written quote.

Get a written quote in Gloucestershire

Free survey for new glazing, clear guide prices and one point of contact for every glazing job.

CallGet a quote