Crewe · Cheshire
Sash Windows in Crewe
Need sash windows in Crewe? We can quote for timber box sashes, spring-balanced designs and uPVC sliding sashes, each made to match your openings.
- CW1
- CW2
- Guide from £1,495
Timber sash windows for homes and businesses in Crewe
Sash windows that run smoothly need routine care: keep the pulley wheels free of paint, wax or lightly lubricate the running channels, check the cords for fraying, and repaint timber before bare wood shows. Draught brush seals in the beads and meeting rails reduce rattles and heat loss.
Many Victorian and Georgian sashes reach low to the floor. In England, Approved Document K treats glazing within 800mm of floor level as a critical location, so the lower panes of tall sash windows usually need toughened or laminated safety glass, which should be permanently marked.
Sash windows can be supplied as complete new frames, or as new double glazed sashes fitted into an existing sound box frame. Keeping the box retains original linings and architraves and reduces disturbance to plaster, but only works when the frame is free of rot and still square.
Security on sash windows comes from keyed sash locks at the meeting rails, sash stops that limit the opening for ventilation and child safety, laminated glass, and close-fitting staff and parting beads. Ground-floor sashes in older houses are often the weakest point, so locks are worth upgrading during replacement.
What's included
- Removal of old sashes or frames and disposal
- Sealing, finishing and written guarantee terms
- Made-to-measure timber or uPVC sash windows
- Survey recording mouldings, horns, bars and box condition
Crewe at a glance
- Postcodes covered
- CW1, CW2 and the surrounding area, including Winsford, Kidsgrove and Congleton
- Coast
- Crewe is well inland, around 33 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Crewe the midwinter sun reaches about 14° above the horizon at noon, with roughly 7.3 hours of daylight, rising to about 60° and 16.7 hours in midsummer. Glazing bars and deep frames reduce daylight, so slimmer bars and high light-transmission low-E glass help north-facing rooms. Tall south-facing sashes can let in strong summer sun; the top sash can be lowered to vent warm air out at high level.
- Access and setting
- Terraced streets and conservation areas often control sash details on front elevations, so check requirements before ordering. Flats need planning permission and freeholder consent, and upper-floor sashes are usually fitted from inside, with careful protection of communal stairs and hallways.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Crewe
| Typical job | Guide price inc VAT |
|---|---|
| uPVC sliding sash, 900 × 1500 mm | £1,495 – £1,995 |
| Timber-effect uPVC sash, 900 × 1500 mm | £1,795 – £2,295 |
| Painted timber sash, 900 × 1500 mm | £2,595 – £3,295 |
Get a guide price for your size
Approved Document F covers ventilation. Replacing windows should not leave a room with worse background ventilation than before, which is why replacement windows often include trickle vents.
Choosing your sash windows
Replacement sashes only
New double glazed sashes fitted into your existing sound box frame, keeping original linings, architraves and plasterwork.
Heritage glass options
Slim double glazing, low-E coatings and textured glass that looks like old cylinder glass for sensitive elevations.
uPVC sliding sash
Low-maintenance uPVC frames with sculpted profiles and optional woodgrain foils, suited to homes where planning rules allow uPVC.
Sash Windows in Crewe: questions
What maintenance do timber sash windows need?
Timber sash windows need periodic repainting, how often depends on exposure, orientation and colour, plus routine checks of cords, pulleys and seals. Keep paint off the running surfaces, clean the sills and touch up chips before water gets in. Factory-finished timber lasts longer between coats than site-painted joinery, but still benefits from yearly inspection.
Can I have double glazed sash windows in a listed building?
Sometimes, but listed building consent is needed for significant works, and some councils will only accept repair of the original windows or slim double glazing with matching details. Secondary glazing is often accepted where new windows are not. Speak to your council's conservation officer before ordering; we can provide drawings and specifications to support an application.
Do sash windows have to meet building regulations?
Yes. Replacement windows are controlled under building regulations across the UK, and the detail differs between nations. In England, the work can be self-certified by an installer registered with a competent person scheme or approved by building control. Energy, ventilation, safety glazing and escape all apply, though listed buildings may meet some standards only where reasonably practicable.
Should I repair or replace my sash windows?
Repair suits sashes where the timber is mostly sound and only cords, beads or small sections need attention, especially in listed or conservation properties. Replacement suits frames with widespread rot, distortion or repeated failures, or where you want double glazing and better security. A survey of each window shows which approach makes sense, and we can quote either.
Do you cover Crewe for sash windows?
Yes. We can quote for sash windows across Crewe and the surrounding Cheshire area, including postcode districts CW1 and CW2, and nearby Winsford, Kidsgrove and Congleton. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Crewe
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.