Crewe · Cheshire
Window Repairs in Crewe
Our glaziers can repair windows and doors across Crewe, matching hinges, locks and seals to your existing frames so everything works and seals properly again.
- CW1
- CW2
- Guide from £65
Crewe: dropped uPVC door repair
In England, upper-floor windows serving bedrooms often double as escape windows. Replacing hinges with restricted-opening stays can reduce the opening below what is needed. Egress hinges give a wider opening for escape, so the glazier checks which type the window needs before fitting.
Sash windows run on cords and weights or on spring balances. A broken cord leaves the sash heavy or loose, and a weak balance makes it slide down. Replacing cords, rehanging the sash and easing the beads can make a sash window run smoothly again.
Simple care keeps hardware working longer. Clean tracks and keeps, then apply a light lubricant to moving parts once or twice a year. Keep drainage slots clear. Avoid slamming doors or forcing handles, as this strains gearboxes and can cause a door to drop over time.
The cost of a window or door repair depends on the part needed, whether it is a standard or discontinued design, how easy it is to identify the make, the number of windows or doors, and access. Discontinued hardware sometimes needs a modern equivalent and adaptation to fit.
Included as standard
- Written quote fixing the price for parts and work
- Check that windows and doors lock and seal
- Matched replacement hinges, stays, handles or locks
- Removal of old parts and packaging
Crewe at a glance
- Postcodes covered
- CW1, CW2 and the surrounding area, including Winsford, Kidsgrove and Congleton
- Coast
- Crewe is well inland, around 33 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Crewe the midwinter sun reaches about 14° above the horizon at noon, with roughly 7.3 hours of daylight, rising to about 60° and 16.7 hours in midsummer. Windows and doors on sunny elevations expand and contract more with temperature, which can make them stick in summer and catch the frame. Dark-coloured doors absorb more heat, so hinge adjustment may be needed after hot spells.
- Access and setting
- In flats and terraced homes, working on upper-floor windows may need to be done from inside. Security matters on street-facing doors, so anti-snap cylinders and secure handles are worth considering. Parking near the property can affect access.
- Rules in England
- Approved Document Q applies to new homes in England, where doors and windows are expected to meet PAS 24 or an equivalent standard. It does not apply to replacements in existing homes, but PAS 24 products are still a sensible choice.
Guide prices in Crewe
| Typical job | Guide price inc VAT |
|---|---|
| Replace a pair of window hinges | £95 – £145 |
| Replace a window locking mechanism | £125 – £195 |
| Replace a door multipoint lock | £195 – £325 |
| Fit an anti-snap cylinder | £65 – £115 |
Get a guide price for your size
Approved Document B covers escape windows. Where an existing window is an escape route, typically in first-floor bedrooms, its replacement should give at least the same escape opening as before.
Options to choose between
Gaskets and draught seals
Replacement seals matched to the frame profile to stop draughts, rattles and noise around opening windows and doors.
Multipoint door lock
A new gearbox or full locking strip for uPVC and composite doors that stick, will not lock or have a loose handle.
Espagnolette lock and gearbox
Replacement locking bar or gearbox for windows that will not lock, have a spinning handle or feel stiff to operate.
Window Repairs in Crewe: questions
How can I stop draughts from my existing windows?
Draughts often come from worn gaskets, a sash that has dropped or keeps that no longer pull the sash tight. Replacing the gaskets with a matching profile and adjusting the keeps or hinges usually fixes the problem. If draughts come through the frame or glass seals, the glazier will say what else needs attention.
My door handle spins and the door will not lock. What is wrong?
A handle that spins without moving the lock usually means the gearbox inside the door has failed, or the spindle connecting handle and gearbox has broken. The gearbox can often be replaced on its own. If the door is stuck locked, the glazier can usually open it without damaging the frame before fitting the new part.
Can sash windows be repaired instead of replaced?
Usually, yes. Broken sash cords, weak spring balances, sticking sashes and rattles can all be fixed on existing frames. The glazier replaces cords or balances, eases or replaces beads, and adds draught seals where needed. Repairing original sash windows also helps keep the character of older properties and conservation areas.
How do I look after window and door hardware?
Clean dirt from tracks, keeps and hinges, then apply a light machine oil or silicone spray to moving parts once or twice a year. Keep frame drainage slots clear. Do not force handles that feel stiff, as this can break gearboxes. Report a dropping door or sticking handle early, as small adjustments are easier than replacing parts.
Do you cover Crewe for window repairs?
Yes. We can quote for window repairs across Crewe and the surrounding Cheshire area, including postcode districts CW1 and CW2, and nearby Winsford, Kidsgrove and Congleton. Start with your postcode on the quote form and a glazier will talk through the job, explain any charge before booking and give you a written quote.
Get a written quote in Crewe
Clear guide prices, any charge explained before booking, and one point of contact for every glazing job.