Banbridge · County Down
Secondary Glazing in Banbridge
Our surveyors can measure windows across Banbridge for secondary glazing, checking reveal depth, opening style and fire escape needs before quoting.
- BT32
- Guide from £465
About secondary glazing for sash windows in Banbridge
If an existing window is relied on for escape in a fire, the secondary glazing in front of it must open easily and give enough clear opening. The surveyor checks which windows are escape windows, so the opening style and catches do not block a way out.
Secondary glazing leaves the original window untouched and fits a second, independent window inside it. The air gap between the two works with the glass to reduce noise and heat loss. In most cases the installation can be taken out later without damaging the historic window or reveal.
Owners of listed buildings should seek listed building consent before installing secondary glazing, as the requirements depend on the building and the council. Secondary glazing is often seen as a minimal, reversible change, but carrying out works that need consent without it is a criminal offence.
A low-emissivity coating on the secondary glass reflects heat back into the room and improves the insulation of the combined window. It is a useful choice for single-glazed sash and casement windows where the originals must be kept for character or planning reasons.
Included as standard
- Fitting, sealing and checking every opening panel
- Advice on opening style, glass and fire escape
- Made-to-measure slim aluminium frames and glass
- Survey of each window, reveal depth and sightlines
Working in Banbridge
- Postcodes covered
- BT32 and the surrounding area, including Craigavon, Lurgan and Portadown
- Coast
- Banbridge is well inland, around 28 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Banbridge the midwinter sun reaches about 12° above the horizon at noon, with roughly 7.0 hours of daylight, rising to about 59° and 17.0 hours in midsummer. Secondary glazing adds an extra layer of glass, which slightly reduces daylight. Low-iron or clear low-E glass keeps light loss to a minimum, while on sunny elevations solar control glass can help reduce overheating in rooms with large windows.
- Access and setting
- Rural cottages and period homes often have single-glazed timber windows that cannot easily be replaced. Secondary glazing reduces draughts and heat loss in exposed locations, and the surveyor allows for uneven reveals and older plaster when fixing frames.
- Rules in Northern Ireland
- Technical Booklet V covers safety glazing in Northern Ireland, including glass in and around doors and low-level glazing where people could walk into it.
Guide prices in Banbridge
| Typical job | Guide price inc VAT |
|---|---|
| Slider, 900 × 1200 mm | £465 – £595 |
| Slider, 1200 × 1600 mm | £665 – £845 |
| Acoustic glass, 1000 × 1400 mm | £675 – £865 |
Get a guide price for your size
Listed buildings in Northern Ireland need listed building consent for most changes to historic windows.
What you can choose
Low-E glass
Coated glass that reflects heat back into the room, improving insulation when the original window is single glazed.
Hinged casement
Panels open inwards like a door, giving full access to the original window, and can be chosen for escape windows.
Lift-out panel
A lightweight panel that lifts out of its frame, for windows rarely opened, giving a slim and economical secondary unit.
Secondary Glazing in Banbridge: questions
Do I need permission for secondary glazing on a listed building?
You should seek listed building consent from the council's planning department before installing secondary glazing on a listed building. Secondary glazing is often seen as a reversible, low-impact change, but consent requirements depend on the building. Carrying out works that need consent without it is a criminal offence. If your home is not listed but is in a conservation area, check with the council if you are unsure.
How much does secondary glazing cost?
The cost depends on the size and number of windows, the opening style, the type of glass, any arched or shaped heads, reveal depth and access. Acoustic and low-E glass cost more than standard clear glass, and shaped frames need more work. See the guide prices for typical windows, then get a written quote after the survey.
Is secondary glazing suitable for rented homes and flats?
Yes. Secondary glazing is fitted inside, so it often avoids the external changes that leases, freeholders or planning rules restrict. It can be removed later with limited making good. Leaseholders should still check their lease for any rules on internal alterations, and landlords should check escape routes are not affected.
Can I still open my original windows?
Yes, as long as the secondary glazing has an opening panel in front of the part you need to open. Sliding and hinged panels give access to the original window for ventilation and cleaning. Lift-out and fixed panels suit windows you rarely or never open.
Do you cover Banbridge for secondary glazing?
Yes. We can quote for secondary glazing across Banbridge and the surrounding County Down area, including postcode districts BT32, and nearby Craigavon, Lurgan and Portadown. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Banbridge
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.