Call 0800 088 6248

Banbridge · County Down

Shower Screens in Banbridge

Our glaziers fit frameless shower screens in Banbridge using 8mm or 10mm toughened safety glass, with hinge and bracing finishes chosen to match your taps and fittings.

  • BT32
  • Guide from £395

Get your free quote

Start with your postcode. A glazier will be in touch to arrange a free survey.

By sending this form you agree we can contact you about this enquiry. See our privacy policy for how we use your details.

No obligation. Prefer to talk? Call 0800 088 6248 or WhatsApp us.

Banbridge: made to measure shower screen

Limescale builds up more quickly in hard-water areas. Wiping the glass with a squeegee after each shower, cleaning weekly with a mild non-abrasive cleaner and avoiding scouring pads keeps it clear. Harsh descalers can also dull metal hinges and attack silicone seals.

A walk-in panel fixed only at the wall and floor needs a bracing bar running to the wall or ceiling to stop it flexing. The bar's position is planned around tiles, windows and shower valves, and a floor channel can reduce or remove the need for a brace.

The glass screen stops spray, but it is not the waterproofing. The tanking behind the tiles, the tray or floor fall and the drain do that job. Clear silicone along the glass edges then seals the joints, and it needs time to cure before the shower is used.

Screens should be measured after tiling is finished, not from plans. Walls are often out of plumb and floors fall towards the drain, and the glass is made to follow those real angles. Measuring early is a common cause of uneven gaps and leaks.

What you get

  • Made-to-measure toughened safety glass with factory-made holes
  • Survey and measurement once tiling is complete
  • Clear silicone sealing to tray, floor and walls
  • Easy-clean coating where specified, plus care advice
Frameless walk-in shower screen with black fittings in a tiled bathroom

Banbridge at a glance

Postcodes covered
BT32 and the surrounding area, including Craigavon, Lurgan and Portadown
Coast
Banbridge is well inland, around 28 km from the nearest coast, so salt exposure is not usually a factor.
Daylight and sun
In Banbridge the midwinter sun reaches about 12° above the horizon at noon, with roughly 7.0 hours of daylight, rising to about 59° and 17.0 hours in midsummer. Bathrooms with small or north-facing windows benefit from clear or low-iron glass that does not block the daylight available. Where a window looks onto the shower, a satin band or obscure glass gives privacy without making the room feel darker.
Access and setting
Older rural homes often have uneven walls, sloping ceilings and timber floors that flex, all of which shape the screen design. Hard water is common in some areas, so an easy-clean coating and regular squeegeeing help keep the glass clear.
Rules in Northern Ireland
Technical Booklet V covers safety glazing in Northern Ireland, including glass in and around doors and low-level glazing where people could walk into it.

Guide prices in Banbridge

Guide prices inc VAT for typical jobs. Remote and island locations are quoted by arrangement. Your written quote fixes the price after measuring.
Typical jobGuide price inc VAT
Walk-in shower panel£395 – £695
Hinged door with in-line panel£795 – £1,295
Corner or full enclosure£995 – £1,595

Get a guide price for your size

Specification choices

Low-iron glass

Glass with less iron, which removes the green edge tint of standard glass and keeps tiles and stone looking their true colour.

Walk-in wet room panel

A single fixed glass panel with a bracing bar or floor channel, leaving an open entry and no door to clean or adjust.

Over-bath screen

A fixed or hinged toughened glass panel on the bath edge, made to measure for baths that sit against sloping ceilings or uneven walls.

Shower Screens in Banbridge: questions

Will a frameless shower screen leak?

A well-designed frameless screen contains spray effectively, but it is not completely watertight like a sealed enclosure. Leaks are prevented by the right panel length, a properly falling floor or level tray, drip and sweep seals on doors, and neat silicone on fixed edges. Shower head position matters too, so we look at it during the survey.

Can a shower screen be fitted to a stud or plasterboard wall?

Yes, provided the hinges and brackets fix into solid backing. On stud or plasterboard walls that usually means timber noggins behind the fixing points, or suitable heavy-duty fixings where noggins were not fitted. A heavy glass door on weak fixings can drop or pull away, so we check the wall during the survey.

Is an easy-clean coating on shower glass worth having?

An easy-clean coating makes water bead and run off, so limescale and soap marks build up more slowly and wiping takes less effort. It is most useful in hard-water areas. It does not replace cleaning, and its life depends on using non-abrasive products, so we give you the care instructions with the screen.

How long does it take to fit a shower screen?

Most shower screens are fitted in a single visit once the glass has been made, which usually takes a couple of weeks after measuring. The silicone then needs time to cure, so you should wait before using the shower, and we tell you how long on the day. Your quote confirms the expected timescale.

Do you cover Banbridge for shower screens?

Yes. We can quote for shower screens across Banbridge and the surrounding County Down area, including postcode districts BT32, and nearby Craigavon, Lurgan and Portadown. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.

Get a written quote in Banbridge

Free survey for new glazing, clear guide prices and one point of contact for every glazing job.

CallGet a quote