Swadlincote · Derbyshire
Secondary Glazing in Swadlincote
Where planning or lease rules limit changes to the outside, secondary glazing in Swadlincote offers an internal option that can be removed later.
- DE11
- Guide from £465
Swadlincote: secondary glazing for sash windows
Slim aluminium frames are designed to sit within the window reveal and line up with the original glazing bars or meeting rails. Matching sightlines keeps the secondary unit discreet from outside and inside, which matters for period homes and conservation areas.
Secondary glazing can also add security, because an intruder would have to break through two separate windows. Laminated glass and locking catches on the secondary unit add further resistance, which is useful for ground-floor and basement windows in period properties.
Secondary glazing leaves the original window untouched and fits a second, independent window inside it. The air gap between the two works with the glass to reduce noise and heat loss. In most cases the installation can be taken out later without damaging the historic window or reveal.
If an existing window is relied on for escape in a fire, the secondary glazing in front of it must open easily and give enough clear opening. The surveyor checks which windows are escape windows, so the opening style and catches do not block a way out.
What's included
- Survey of each window, reveal depth and sightlines
- Written quote fixing the price for the specification
- Removal of packaging and cleaning of new glass
- Fitting, sealing and checking every opening panel
Swadlincote at a glance
- Postcodes covered
- DE11 and the surrounding area, including Burton upon Trent, Coalville and Derby
- Coast
- Swadlincote is well inland, around 102 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Swadlincote the midwinter sun reaches about 14° above the horizon at noon, with roughly 7.4 hours of daylight, rising to about 61° and 16.6 hours in midsummer. Secondary glazing adds an extra layer of glass, which slightly reduces daylight. Low-iron or clear low-E glass keeps light loss to a minimum, while on sunny elevations solar control glass can help reduce overheating in rooms with large windows.
- Access and setting
- Rural cottages and period homes often have single-glazed timber windows that cannot easily be replaced. Secondary glazing reduces draughts and heat loss in exposed locations, and the surveyor allows for uneven reveals and older plaster when fixing frames.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Swadlincote
| Typical job | Guide price inc VAT |
|---|---|
| Slider, 900 × 1200 mm | £465 – £595 |
| Slider, 1200 × 1600 mm | £665 – £845 |
| Acoustic glass, 1000 × 1400 mm | £675 – £865 |
Get a guide price for your size
Listed buildings in England need listed building consent for most changes to historic windows or glass, and conservation areas can restrict changes visible from the street. Speak to the council's conservation officer before ordering.
Options to choose between
Hinged casement
Panels open inwards like a door, giving full access to the original window, and can be chosen for escape windows.
Vertical sliding
Panels slide up and down, with meeting rails aligned to sash windows so the secondary unit is discreet from inside and outside.
Acoustic laminated glass
Laminated glass with a sound-dampening interlayer, combined with a generous cavity, for properties affected by traffic, rail or aircraft noise.
Secondary Glazing in Swadlincote: questions
How much does secondary glazing cost?
The cost depends on the size and number of windows, the opening style, the type of glass, any arched or shaped heads, reveal depth and access. Acoustic and low-E glass cost more than standard clear glass, and shaped frames need more work. See the guide prices for typical windows, then get a written quote after the survey.
How do I clean and look after secondary glazing?
Open or remove the panels as designed, then clean the glass with mild soapy water and a soft cloth. Wipe the aluminium frames and runners, and keep tracks free of dust so panels slide smoothly. Check seals and catches occasionally. Avoid abrasive cleaners, which can scratch coated glass.
Is secondary glazing suitable for rented homes and flats?
Yes. Secondary glazing is fitted inside, so it often avoids the external changes that leases, freeholders or planning rules restrict. It can be removed later with limited making good. Leaseholders should still check their lease for any rules on internal alterations, and landlords should check escape routes are not affected.
Do I need permission for secondary glazing on a listed building?
You should seek listed building consent from the council's planning department before installing secondary glazing on a listed building. Secondary glazing is often seen as a reversible, low-impact change, but consent requirements depend on the building. Carrying out works that need consent without it is a criminal offence. If your home is not listed but is in a conservation area, check with the council if you are unsure.
Do you cover Swadlincote for secondary glazing?
Yes. We can quote for secondary glazing across Swadlincote and the surrounding Derbyshire area, including postcode districts DE11, and nearby Burton upon Trent, Coalville and Derby. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Swadlincote
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.