Burton upon Trent · Staffordshire
Secondary Glazing in Burton upon Trent
Where planning or lease rules limit changes to the outside, secondary glazing in Burton upon Trent offers an internal option that can be removed later.
- DE14
- DE15
- Guide from £465
Burton upon Trent: secondary glazing for sash windows
If an existing window is relied on for escape in a fire, the secondary glazing in front of it must open easily and give enough clear opening. The surveyor checks which windows are escape windows, so the opening style and catches do not block a way out.
Owners of listed buildings should seek listed building consent before installing secondary glazing, as the requirements depend on the building and the council. Secondary glazing is often seen as a minimal, reversible change, but carrying out works that need consent without it is a criminal offence.
Secondary glazing leaves the original window untouched and fits a second, independent window inside it. The air gap between the two works with the glass to reduce noise and heat loss. In most cases the installation can be taken out later without damaging the historic window or reveal.
Low-level secondary glazing is still glazing, so the safety glazing rules for critical locations apply. In England, Approved Document K treats glass within 800mm of the floor as a critical location, so low-level secondary panes should be toughened or laminated safety glass.
What you get
- Made-to-measure slim aluminium frames and glass
- Removal of packaging and cleaning of new glass
- Fitting, sealing and checking every opening panel
- Survey of each window, reveal depth and sightlines
Working in Burton upon Trent
- Postcodes covered
- DE14, DE15 and the surrounding area, including Swadlincote, Derby and Lichfield
- Coast
- Burton upon Trent is well inland, around 95 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Burton upon Trent the midwinter sun reaches about 14° above the horizon at noon, with roughly 7.4 hours of daylight, rising to about 61° and 16.6 hours in midsummer. Secondary glazing adds an extra layer of glass, which slightly reduces daylight. Low-iron or clear low-E glass keeps light loss to a minimum, while on sunny elevations solar control glass can help reduce overheating in rooms with large windows.
- Access and setting
- In city centres and busy streets, acoustic secondary glazing is a common response to traffic, rail and nightlife noise. Flats, listed buildings and conservation areas often limit external changes, which makes internal secondary glazing a practical option.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Burton upon Trent
| Typical job | Guide price inc VAT |
|---|---|
| Slider, 900 × 1200 mm | £465 – £595 |
| Slider, 1200 × 1600 mm | £665 – £845 |
| Acoustic glass, 1000 × 1400 mm | £675 – £865 |
Get a guide price for your size
Approved Document B covers escape windows. Where an existing window is an escape route, typically in first-floor bedrooms, its replacement should give at least the same escape opening as before.
Specification choices
Hinged casement
Panels open inwards like a door, giving full access to the original window, and can be chosen for escape windows.
Fixed panel
A non-opening unit for windows never opened, giving the most airtight seal for noise and draught reduction.
Vertical sliding
Panels slide up and down, with meeting rails aligned to sash windows so the secondary unit is discreet from inside and outside.
Secondary Glazing in Burton upon Trent: questions
How much noise does secondary glazing block?
Results depend on the size of the gap between the windows, the glass type and thickness, the seals and the original window. A larger cavity and acoustic laminated glass give the strongest improvement. The survey checks reveal depth and noise sources, so the specification can be tailored to the noise you are dealing with.
Is secondary glazing as good as double glazing?
It depends on the goal. For noise, secondary glazing is often more effective, because the wider gap between the two windows reduces sound better than the narrow cavity of a sealed unit. For heat, a well-sealed secondary unit with low-E glass significantly improves a single-glazed window. It also keeps original windows, which matters in listed buildings.
Which opening style should I choose?
Choose based on how you use the window. Vertical sliders suit sash windows and keep meeting rails aligned. Horizontal sliders suit wide windows. Hinged panels give full access for cleaning and escape. Lift-out and fixed panels suit windows that are rarely or never opened, and give the tightest seal for noise.
How much does secondary glazing cost?
The cost depends on the size and number of windows, the opening style, the type of glass, any arched or shaped heads, reveal depth and access. Acoustic and low-E glass cost more than standard clear glass, and shaped frames need more work. See the guide prices for typical windows, then get a written quote after the survey.
Do you cover Burton upon Trent for secondary glazing?
Yes. We can quote for secondary glazing across Burton upon Trent and the surrounding Staffordshire area, including postcode districts DE14 and DE15, and nearby Swadlincote, Derby and Lichfield. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
More glazing in Burton upon Trent
Get a written quote in Burton upon Trent
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.