Putney · Greater London
Secondary Glazing in Putney
Secondary glazing in Putney keeps your original windows in place while adding a slim inner window to cut noise, draughts and heat loss.
- SW15
- SW6
- SW18
- Guide from £465
Putney: internal secondary windows
The price of secondary glazing depends on the size and number of windows, the opening style, the glass specification, any shaped or arched heads, reveal depth and condition, and access. Acoustic laminated glass and shaped frames cost more than standard clear glass in rectangular frames.
Owners of listed buildings should seek listed building consent before installing secondary glazing, as the requirements depend on the building and the council. Secondary glazing is often seen as a minimal, reversible change, but carrying out works that need consent without it is a criminal offence.
Secondary glazing leaves the original window untouched and fits a second, independent window inside it. The air gap between the two works with the glass to reduce noise and heat loss. In most cases the installation can be taken out later without damaging the historic window or reveal.
Opening styles include vertical sliders that line up with sash window meeting rails, horizontal sliders for wide openings, hinged casements, lift-out panels for windows that are rarely opened, and fixed panes. The choice depends on how you use the window, cleaning access and fire escape needs.
Included as standard
- Advice on opening style, glass and fire escape
- Survey of each window, reveal depth and sightlines
- Made-to-measure slim aluminium frames and glass
- Removal of packaging and cleaning of new glass
About Putney for this job
- Postcodes covered
- SW15, SW6, SW18 and the surrounding area, including Wandsworth, Barnes and Fulham
- Coast
- Putney is well inland, around 40 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Putney the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. Secondary glazing adds an extra layer of glass, which slightly reduces daylight. Low-iron or clear low-E glass keeps light loss to a minimum, while on sunny elevations solar control glass can help reduce overheating in rooms with large windows.
- Access and setting
- In city centres and busy streets, acoustic secondary glazing is a common response to traffic, rail and nightlife noise. Flats, listed buildings and conservation areas often limit external changes, which makes internal secondary glazing a practical option.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Putney
| Typical job | Guide price inc VAT |
|---|---|
| Slider, 900 × 1200 mm | £465 – £595 |
| Slider, 1200 × 1600 mm | £665 – £845 |
| Acoustic glass, 1000 × 1400 mm | £675 – £865 |
Get a guide price for your size
Listed buildings in England need listed building consent for most changes to historic windows or glass, and conservation areas can restrict changes visible from the street. Speak to the council's conservation officer before ordering.
What you can choose
Acoustic laminated glass
Laminated glass with a sound-dampening interlayer, combined with a generous cavity, for properties affected by traffic, rail or aircraft noise.
Horizontal sliding
Panels slide sideways, suiting wide casement windows and openings where you need regular access for cleaning or ventilation.
Fixed panel
A non-opening unit for windows never opened, giving the most airtight seal for noise and draught reduction.
Secondary Glazing in Putney: questions
How much noise does secondary glazing block?
Results depend on the size of the gap between the windows, the glass type and thickness, the seals and the original window. A larger cavity and acoustic laminated glass give the strongest improvement. The survey checks reveal depth and noise sources, so the specification can be tailored to the noise you are dealing with.
Will secondary glazing cause condensation?
It can, if the original window is sealed tighter than the secondary unit, because warm, moist room air then gets trapped in the cavity. The secondary unit should be the more airtight of the two, and the original window should not be fully sealed. Opening the secondary panel lets room air into the cavity, so close it again afterwards.
Is secondary glazing as good as double glazing?
It depends on the goal. For noise, secondary glazing is often more effective, because the wider gap between the two windows reduces sound better than the narrow cavity of a sealed unit. For heat, a well-sealed secondary unit with low-E glass significantly improves a single-glazed window. It also keeps original windows, which matters in listed buildings.
Does secondary glazing need safety glass?
It does in critical locations. In England, glass within 800mm of the floor, glass in doors and glass near doors are critical locations under Approved Document K, and these apply to secondary glazing too. Low-level secondary panes should be toughened or laminated safety glass. The surveyor checks each window during the survey.
Do you cover Putney for secondary glazing?
Yes. We can quote for secondary glazing across Putney and the surrounding Greater London area, including postcode districts SW15, SW6 and SW18, and nearby Wandsworth, Barnes and Fulham. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Putney
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.