Sittingbourne · Kent
Secondary Glazing in Sittingbourne
Single-glazed sash windows in Sittingbourne can stay as they are, with vertical sliding secondary glazing fitted inside to reduce draughts and cold.
- ME9
- ME10
- ME12
- Guide from £465
Secondary glazing for homes and businesses in Sittingbourne
The price of secondary glazing depends on the size and number of windows, the opening style, the glass specification, any shaped or arched heads, reveal depth and condition, and access. Acoustic laminated glass and shaped frames cost more than standard clear glass in rectangular frames.
A low-emissivity coating on the secondary glass reflects heat back into the room and improves the insulation of the combined window. It is a useful choice for single-glazed sash and casement windows where the originals must be kept for character or planning reasons.
Secondary glazing leaves the original window untouched and fits a second, independent window inside it. The air gap between the two works with the glass to reduce noise and heat loss. In most cases the installation can be taken out later without damaging the historic window or reveal.
Low-level secondary glazing is still glazing, so the safety glazing rules for critical locations apply. In England, Approved Document K treats glass within 800mm of the floor as a critical location, so low-level secondary panes should be toughened or laminated safety glass.
What's included
- Advice on opening style, glass and fire escape
- Made-to-measure slim aluminium frames and glass
- Fitting, sealing and checking every opening panel
- Written quote fixing the price for the specification
About Sittingbourne for this job
- Postcodes covered
- ME9, ME10, ME12 and the surrounding area, including Faversham, Gillingham and Chatham
- Coast
- Sittingbourne sits roughly 6 km from the nearest coastline, close enough that exposure on open or high ground is worth considering. Coastal properties often have older windows exposed to wind-driven rain and draughts. Secondary glazing adds a sealed inner layer that reduces draughts and cold, while the original window keeps out the weather and its condition is protected from inside.
- Daylight and sun
- In Sittingbourne the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. Secondary glazing adds an extra layer of glass, which slightly reduces daylight. Low-iron or clear low-E glass keeps light loss to a minimum, while on sunny elevations solar control glass can help reduce overheating in rooms with large windows.
- Access and setting
- Rural cottages and period homes often have single-glazed timber windows that cannot easily be replaced. Secondary glazing reduces draughts and heat loss in exposed locations, and the surveyor allows for uneven reveals and older plaster when fixing frames.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Sittingbourne
| Typical job | Guide price inc VAT |
|---|---|
| Slider, 900 × 1200 mm | £465 – £595 |
| Slider, 1200 × 1600 mm | £665 – £845 |
| Acoustic glass, 1000 × 1400 mm | £675 – £865 |
Get a guide price for your size
Listed buildings in England need listed building consent for most changes to historic windows or glass, and conservation areas can restrict changes visible from the street. Speak to the council's conservation officer before ordering.
Specification choices
Vertical sliding
Panels slide up and down, with meeting rails aligned to sash windows so the secondary unit is discreet from inside and outside.
Lift-out panel
A lightweight panel that lifts out of its frame, for windows rarely opened, giving a slim and economical secondary unit.
Low-E glass
Coated glass that reflects heat back into the room, improving insulation when the original window is single glazed.
Secondary Glazing in Sittingbourne: questions
Does secondary glazing need safety glass?
It does in critical locations. In England, glass within 800mm of the floor, glass in doors and glass near doors are critical locations under Approved Document K, and these apply to secondary glazing too. Low-level secondary panes should be toughened or laminated safety glass. The surveyor checks each window during the survey.
Will secondary glazing cause condensation?
It can, if the original window is sealed tighter than the secondary unit, because warm, moist room air then gets trapped in the cavity. The secondary unit should be the more airtight of the two, and the original window should not be fully sealed. Opening the secondary panel lets room air into the cavity, so close it again afterwards.
Which opening style should I choose?
Choose based on how you use the window. Vertical sliders suit sash windows and keep meeting rails aligned. Horizontal sliders suit wide windows. Hinged panels give full access for cleaning and escape. Lift-out and fixed panels suit windows that are rarely or never opened, and give the tightest seal for noise.
How do I clean and look after secondary glazing?
Open or remove the panels as designed, then clean the glass with mild soapy water and a soft cloth. Wipe the aluminium frames and runners, and keep tracks free of dust so panels slide smoothly. Check seals and catches occasionally. Avoid abrasive cleaners, which can scratch coated glass.
Do you cover Sittingbourne for secondary glazing?
Yes. We can quote for secondary glazing across Sittingbourne and the surrounding Kent area, including postcode districts ME9, ME10 and ME12, and nearby Faversham, Gillingham and Chatham. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Sittingbourne
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.