Boston · Lincolnshire
Secondary Glazing in Boston
Our surveyors can measure windows across Boston for secondary glazing, checking reveal depth, opening style and fire escape needs before quoting.
- PE21
- Guide from £465
Secondary glazing in Boston: what to know
Secondary glazing leaves the original window untouched and fits a second, independent window inside it. The air gap between the two works with the glass to reduce noise and heat loss. In most cases the installation can be taken out later without damaging the historic window or reveal.
A low-emissivity coating on the secondary glass reflects heat back into the room and improves the insulation of the combined window. It is a useful choice for single-glazed sash and casement windows where the originals must be kept for character or planning reasons.
Glass for secondary glazing is heavy, so the frames need firm fixings into the reveal or a supporting sub-frame. The surveyor checks that plaster, timber linings and window boards are sound enough to carry the weight, and allows for any packing needed in uneven reveals.
The price of secondary glazing depends on the size and number of windows, the opening style, the glass specification, any shaped or arched heads, reveal depth and condition, and access. Acoustic laminated glass and shaped frames cost more than standard clear glass in rectangular frames.
What a typical job includes
- Survey of each window, reveal depth and sightlines
- Written quote fixing the price for the specification
- Fitting, sealing and checking every opening panel
- Made-to-measure slim aluminium frames and glass
Local details for Boston
- Postcodes covered
- PE21 and the surrounding area, including Spalding, Sleaford and Skegness
- Coast
- Boston sits roughly 7 km from the nearest coastline, close enough that exposure on open or high ground is worth considering. Coastal properties often have older windows exposed to wind-driven rain and draughts. Secondary glazing adds a sealed inner layer that reduces draughts and cold, while the original window keeps out the weather and its condition is protected from inside.
- Daylight and sun
- In Boston the midwinter sun reaches about 14° above the horizon at noon, with roughly 7.3 hours of daylight, rising to about 60° and 16.7 hours in midsummer. Secondary glazing adds an extra layer of glass, which slightly reduces daylight. Low-iron or clear low-E glass keeps light loss to a minimum, while on sunny elevations solar control glass can help reduce overheating in rooms with large windows.
- Access and setting
- Rural cottages and period homes often have single-glazed timber windows that cannot easily be replaced. Secondary glazing reduces draughts and heat loss in exposed locations, and the surveyor allows for uneven reveals and older plaster when fixing frames.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Boston
| Typical job | Guide price inc VAT |
|---|---|
| Slider, 900 × 1200 mm | £465 – £595 |
| Slider, 1200 × 1600 mm | £665 – £845 |
| Acoustic glass, 1000 × 1400 mm | £675 – £865 |
Get a guide price for your size
Approved Document B covers escape windows. Where an existing window is an escape route, typically in first-floor bedrooms, its replacement should give at least the same escape opening as before.
Options to choose between
Lift-out panel
A lightweight panel that lifts out of its frame, for windows rarely opened, giving a slim and economical secondary unit.
Fixed panel
A non-opening unit for windows never opened, giving the most airtight seal for noise and draught reduction.
Horizontal sliding
Panels slide sideways, suiting wide casement windows and openings where you need regular access for cleaning or ventilation.
Secondary Glazing in Boston: questions
How much does secondary glazing cost?
The cost depends on the size and number of windows, the opening style, the type of glass, any arched or shaped heads, reveal depth and access. Acoustic and low-E glass cost more than standard clear glass, and shaped frames need more work. See the guide prices for typical windows, then get a written quote after the survey.
How much noise does secondary glazing block?
Results depend on the size of the gap between the windows, the glass type and thickness, the seals and the original window. A larger cavity and acoustic laminated glass give the strongest improvement. The survey checks reveal depth and noise sources, so the specification can be tailored to the noise you are dealing with.
Will secondary glazing cause condensation?
It can, if the original window is sealed tighter than the secondary unit, because warm, moist room air then gets trapped in the cavity. The secondary unit should be the more airtight of the two, and the original window should not be fully sealed. Opening the secondary panel lets room air into the cavity, so close it again afterwards.
Do I need permission for secondary glazing on a listed building?
You should seek listed building consent from the council's planning department before installing secondary glazing on a listed building. Secondary glazing is often seen as a reversible, low-impact change, but consent requirements depend on the building. Carrying out works that need consent without it is a criminal offence. If your home is not listed but is in a conservation area, check with the council if you are unsure.
Do you cover Boston for secondary glazing?
Yes. We can quote for secondary glazing across Boston and the surrounding Lincolnshire area, including postcode districts PE21, and nearby Spalding, Sleaford and Skegness. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Boston
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.