Abingdon · Oxfordshire
Secondary Glazing in Abingdon
Is traffic noise getting through the windows of your home in Abingdon? We can quote for acoustic secondary glazing tailored to each opening.
- OX14
- OX13
- Guide from £465
Abingdon: secondary glazing
Opening styles include vertical sliders that line up with sash window meeting rails, horizontal sliders for wide openings, hinged casements, lift-out panels for windows that are rarely opened, and fixed panes. The choice depends on how you use the window, cleaning access and fire escape needs.
Owners of listed buildings should seek listed building consent before installing secondary glazing, as the requirements depend on the building and the council. Secondary glazing is often seen as a minimal, reversible change, but carrying out works that need consent without it is a criminal offence.
Secondary glazing leaves the original window untouched and fits a second, independent window inside it. The air gap between the two works with the glass to reduce noise and heat loss. In most cases the installation can be taken out later without damaging the historic window or reveal.
Condensation in the gap between the two windows is reduced by making the secondary unit the more airtight of the two. The original window should not be fully sealed, so any moisture that gets into the cavity can escape outside rather than being trapped against the glass.
What a typical job includes
- Written quote fixing the price for the specification
- Fitting, sealing and checking every opening panel
- Survey of each window, reveal depth and sightlines
- Advice on opening style, glass and fire escape
Local details for Abingdon
- Postcodes covered
- OX14, OX13 and the surrounding area, including Didcot, Oxford and Wantage
- Coast
- Abingdon is well inland, around 78 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Abingdon the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. Secondary glazing adds an extra layer of glass, which slightly reduces daylight. Low-iron or clear low-E glass keeps light loss to a minimum, while on sunny elevations solar control glass can help reduce overheating in rooms with large windows.
- Access and setting
- Rural cottages and period homes often have single-glazed timber windows that cannot easily be replaced. Secondary glazing reduces draughts and heat loss in exposed locations, and the surveyor allows for uneven reveals and older plaster when fixing frames.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Abingdon
| Typical job | Guide price inc VAT |
|---|---|
| Slider, 900 × 1200 mm | £465 – £595 |
| Slider, 1200 × 1600 mm | £665 – £845 |
| Acoustic glass, 1000 × 1400 mm | £675 – £865 |
Get a guide price for your size
Approved Document L sets the minimum energy performance for replacement windows and doors in existing homes in England: a U-value of 1.4 W/m²K, or Window Energy Rating band B for windows; doors can instead meet a Door Set Energy Rating (band B, or band C for doors more than 60% glazed); rooflights need 2.2 W/m²K.
Specification choices
Fixed panel
A non-opening unit for windows never opened, giving the most airtight seal for noise and draught reduction.
Hinged casement
Panels open inwards like a door, giving full access to the original window, and can be chosen for escape windows.
Acoustic laminated glass
Laminated glass with a sound-dampening interlayer, combined with a generous cavity, for properties affected by traffic, rail or aircraft noise.
Secondary Glazing in Abingdon: questions
Does secondary glazing need safety glass?
It does in critical locations. In England, glass within 800mm of the floor, glass in doors and glass near doors are critical locations under Approved Document K, and these apply to secondary glazing too. Low-level secondary panes should be toughened or laminated safety glass. The surveyor checks each window during the survey.
How much noise does secondary glazing block?
Results depend on the size of the gap between the windows, the glass type and thickness, the seals and the original window. A larger cavity and acoustic laminated glass give the strongest improvement. The survey checks reveal depth and noise sources, so the specification can be tailored to the noise you are dealing with.
Is secondary glazing as good as double glazing?
It depends on the goal. For noise, secondary glazing is often more effective, because the wider gap between the two windows reduces sound better than the narrow cavity of a sealed unit. For heat, a well-sealed secondary unit with low-E glass significantly improves a single-glazed window. It also keeps original windows, which matters in listed buildings.
How do I clean and look after secondary glazing?
Open or remove the panels as designed, then clean the glass with mild soapy water and a soft cloth. Wipe the aluminium frames and runners, and keep tracks free of dust so panels slide smoothly. Check seals and catches occasionally. Avoid abrasive cleaners, which can scratch coated glass.
Do you cover Abingdon for secondary glazing?
Yes. We can quote for secondary glazing across Abingdon and the surrounding Oxfordshire area, including postcode districts OX14 and OX13, and nearby Didcot, Oxford and Wantage. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
More glazing in Abingdon
Secondary Glazing nearby
Get a written quote in Abingdon
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.