Thame · Oxfordshire
Secondary Glazing in Thame
We cover Thame and Oxfordshire for secondary glazing in period homes, flats and listed buildings, with sightlines matched to the original windows.
- OX9
- Guide from £465
About internal secondary windows in Thame
Owners of listed buildings should seek listed building consent before installing secondary glazing, as the requirements depend on the building and the council. Secondary glazing is often seen as a minimal, reversible change, but carrying out works that need consent without it is a criminal offence.
Glass for secondary glazing is heavy, so the frames need firm fixings into the reveal or a supporting sub-frame. The surveyor checks that plaster, timber linings and window boards are sound enough to carry the weight, and allows for any packing needed in uneven reveals.
Secondary glazing leaves the original window untouched and fits a second, independent window inside it. The air gap between the two works with the glass to reduce noise and heat loss. In most cases the installation can be taken out later without damaging the historic window or reveal.
The price of secondary glazing depends on the size and number of windows, the opening style, the glass specification, any shaped or arched heads, reveal depth and condition, and access. Acoustic laminated glass and shaped frames cost more than standard clear glass in rectangular frames.
Included as standard
- Written quote fixing the price for the specification
- Survey of each window, reveal depth and sightlines
- Removal of packaging and cleaning of new glass
- Advice on opening style, glass and fire escape
Local details for Thame
- Postcodes covered
- OX9 and the surrounding area, including Aylesbury, Oxford and High Wycombe
- Coast
- Thame is well inland, around 98 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Thame the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. Secondary glazing adds an extra layer of glass, which slightly reduces daylight. Low-iron or clear low-E glass keeps light loss to a minimum, while on sunny elevations solar control glass can help reduce overheating in rooms with large windows.
- Access and setting
- Rural cottages and period homes often have single-glazed timber windows that cannot easily be replaced. Secondary glazing reduces draughts and heat loss in exposed locations, and the surveyor allows for uneven reveals and older plaster when fixing frames.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Thame
| Typical job | Guide price inc VAT |
|---|---|
| Slider, 900 × 1200 mm | £465 – £595 |
| Slider, 1200 × 1600 mm | £665 – £845 |
| Acoustic glass, 1000 × 1400 mm | £675 – £865 |
Get a guide price for your size
Approved Document L sets the minimum energy performance for replacement windows and doors in existing homes in England: a U-value of 1.4 W/m²K, or Window Energy Rating band B for windows; doors can instead meet a Door Set Energy Rating (band B, or band C for doors more than 60% glazed); rooflights need 2.2 W/m²K.
Specification choices
Acoustic laminated glass
Laminated glass with a sound-dampening interlayer, combined with a generous cavity, for properties affected by traffic, rail or aircraft noise.
Horizontal sliding
Panels slide sideways, suiting wide casement windows and openings where you need regular access for cleaning or ventilation.
Hinged casement
Panels open inwards like a door, giving full access to the original window, and can be chosen for escape windows.
Secondary Glazing in Thame: questions
How much does secondary glazing cost?
The cost depends on the size and number of windows, the opening style, the type of glass, any arched or shaped heads, reveal depth and access. Acoustic and low-E glass cost more than standard clear glass, and shaped frames need more work. See the guide prices for typical windows, then get a written quote after the survey.
Is secondary glazing as good as double glazing?
It depends on the goal. For noise, secondary glazing is often more effective, because the wider gap between the two windows reduces sound better than the narrow cavity of a sealed unit. For heat, a well-sealed secondary unit with low-E glass significantly improves a single-glazed window. It also keeps original windows, which matters in listed buildings.
How do I clean and look after secondary glazing?
Open or remove the panels as designed, then clean the glass with mild soapy water and a soft cloth. Wipe the aluminium frames and runners, and keep tracks free of dust so panels slide smoothly. Check seals and catches occasionally. Avoid abrasive cleaners, which can scratch coated glass.
How much noise does secondary glazing block?
Results depend on the size of the gap between the windows, the glass type and thickness, the seals and the original window. A larger cavity and acoustic laminated glass give the strongest improvement. The survey checks reveal depth and noise sources, so the specification can be tailored to the noise you are dealing with.
Do you cover Thame for secondary glazing?
Yes. We can quote for secondary glazing across Thame and the surrounding Oxfordshire area, including postcode districts OX9, and nearby Aylesbury, Oxford and High Wycombe. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Thame
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.