Wellington · Shropshire
Secondary Glazing in Wellington
Is traffic noise getting through the windows of your home in Wellington? We can quote for acoustic secondary glazing tailored to each opening.
- TF1
- TF5
- Guide from £465
Secondary glazing listed buildings in Wellington: what to know
If an existing window is relied on for escape in a fire, the secondary glazing in front of it must open easily and give enough clear opening. The surveyor checks which windows are escape windows, so the opening style and catches do not block a way out.
A low-emissivity coating on the secondary glass reflects heat back into the room and improves the insulation of the combined window. It is a useful choice for single-glazed sash and casement windows where the originals must be kept for character or planning reasons.
Slim aluminium frames are designed to sit within the window reveal and line up with the original glazing bars or meeting rails. Matching sightlines keeps the secondary unit discreet from outside and inside, which matters for period homes and conservation areas.
Owners of listed buildings should seek listed building consent before installing secondary glazing, as the requirements depend on the building and the council. Secondary glazing is often seen as a minimal, reversible change, but carrying out works that need consent without it is a criminal offence.
Included as standard
- Survey of each window, reveal depth and sightlines
- Made-to-measure slim aluminium frames and glass
- Removal of packaging and cleaning of new glass
- Written quote fixing the price for the specification
Working in Wellington
- Postcodes covered
- TF1, TF5 and the surrounding area, including Telford, Shrewsbury and Bridgnorth
- Coast
- Wellington is well inland, around 70 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Wellington the midwinter sun reaches about 14° above the horizon at noon, with roughly 7.4 hours of daylight, rising to about 61° and 16.6 hours in midsummer. Secondary glazing adds an extra layer of glass, which slightly reduces daylight. Low-iron or clear low-E glass keeps light loss to a minimum, while on sunny elevations solar control glass can help reduce overheating in rooms with large windows.
- Access and setting
- Rural cottages and period homes often have single-glazed timber windows that cannot easily be replaced. Secondary glazing reduces draughts and heat loss in exposed locations, and the surveyor allows for uneven reveals and older plaster when fixing frames.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Wellington
| Typical job | Guide price inc VAT |
|---|---|
| Slider, 900 × 1200 mm | £465 – £595 |
| Slider, 1200 × 1600 mm | £665 – £845 |
| Acoustic glass, 1000 × 1400 mm | £675 – £865 |
Get a guide price for your size
Approved Document B covers escape windows. Where an existing window is an escape route, typically in first-floor bedrooms, its replacement should give at least the same escape opening as before.
What you can choose
Lift-out panel
A lightweight panel that lifts out of its frame, for windows rarely opened, giving a slim and economical secondary unit.
Low-E glass
Coated glass that reflects heat back into the room, improving insulation when the original window is single glazed.
Hinged casement
Panels open inwards like a door, giving full access to the original window, and can be chosen for escape windows.
Secondary Glazing in Wellington: questions
How much does secondary glazing cost?
The cost depends on the size and number of windows, the opening style, the type of glass, any arched or shaped heads, reveal depth and access. Acoustic and low-E glass cost more than standard clear glass, and shaped frames need more work. See the guide prices for typical windows, then get a written quote after the survey.
Will secondary glazing cause condensation?
It can, if the original window is sealed tighter than the secondary unit, because warm, moist room air then gets trapped in the cavity. The secondary unit should be the more airtight of the two, and the original window should not be fully sealed. Opening the secondary panel lets room air into the cavity, so close it again afterwards.
Do I need permission for secondary glazing on a listed building?
You should seek listed building consent from the council's planning department before installing secondary glazing on a listed building. Secondary glazing is often seen as a reversible, low-impact change, but consent requirements depend on the building. Carrying out works that need consent without it is a criminal offence. If your home is not listed but is in a conservation area, check with the council if you are unsure.
Is secondary glazing suitable for rented homes and flats?
Yes. Secondary glazing is fitted inside, so it often avoids the external changes that leases, freeholders or planning rules restrict. It can be removed later with limited making good. Leaseholders should still check their lease for any rules on internal alterations, and landlords should check escape routes are not affected.
Do you cover Wellington for secondary glazing?
Yes. We can quote for secondary glazing across Wellington and the surrounding Shropshire area, including postcode districts TF1 and TF5, and nearby Telford, Shrewsbury and Bridgnorth. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Wellington
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.