Wells · Somerset
Secondary Glazing in Wells
Our surveyors can measure windows across Wells for secondary glazing, checking reveal depth, opening style and fire escape needs before quoting.
- BA5
- Guide from £465
Wells: acoustic secondary glazing
Low-level secondary glazing is still glazing, so the safety glazing rules for critical locations apply. In England, Approved Document K treats glass within 800mm of the floor as a critical location, so low-level secondary panes should be toughened or laminated safety glass.
Owners of listed buildings should seek listed building consent before installing secondary glazing, as the requirements depend on the building and the council. Secondary glazing is often seen as a minimal, reversible change, but carrying out works that need consent without it is a criminal offence.
Condensation in the gap between the two windows is reduced by making the secondary unit the more airtight of the two. The original window should not be fully sealed, so any moisture that gets into the cavity can escape outside rather than being trapped against the glass.
Glass for secondary glazing is heavy, so the frames need firm fixings into the reveal or a supporting sub-frame. The surveyor checks that plaster, timber linings and window boards are sound enough to carry the weight, and allows for any packing needed in uneven reveals.
Included as standard
- Advice on opening style, glass and fire escape
- Made-to-measure slim aluminium frames and glass
- Fitting, sealing and checking every opening panel
- Removal of packaging and cleaning of new glass
About Wells for this job
- Postcodes covered
- BA5 and the surrounding area, including Shepton Mallet, Street and Frome
- Coast
- Wells is well inland, around 25 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Wells the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. Secondary glazing adds an extra layer of glass, which slightly reduces daylight. Low-iron or clear low-E glass keeps light loss to a minimum, while on sunny elevations solar control glass can help reduce overheating in rooms with large windows.
- Access and setting
- Rural cottages and period homes often have single-glazed timber windows that cannot easily be replaced. Secondary glazing reduces draughts and heat loss in exposed locations, and the surveyor allows for uneven reveals and older plaster when fixing frames.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Wells
| Typical job | Guide price inc VAT |
|---|---|
| Slider, 900 × 1200 mm | £465 – £595 |
| Slider, 1200 × 1600 mm | £665 – £845 |
| Acoustic glass, 1000 × 1400 mm | £675 – £865 |
Get a guide price for your size
Approved Document B covers escape windows. Where an existing window is an escape route, typically in first-floor bedrooms, its replacement should give at least the same escape opening as before.
What you can choose
Low-E glass
Coated glass that reflects heat back into the room, improving insulation when the original window is single glazed.
Fixed panel
A non-opening unit for windows never opened, giving the most airtight seal for noise and draught reduction.
Vertical sliding
Panels slide up and down, with meeting rails aligned to sash windows so the secondary unit is discreet from inside and outside.
Secondary Glazing in Wells: questions
How much noise does secondary glazing block?
Results depend on the size of the gap between the windows, the glass type and thickness, the seals and the original window. A larger cavity and acoustic laminated glass give the strongest improvement. The survey checks reveal depth and noise sources, so the specification can be tailored to the noise you are dealing with.
Does secondary glazing need safety glass?
It does in critical locations. In England, glass within 800mm of the floor, glass in doors and glass near doors are critical locations under Approved Document K, and these apply to secondary glazing too. Low-level secondary panes should be toughened or laminated safety glass. The surveyor checks each window during the survey.
Which opening style should I choose?
Choose based on how you use the window. Vertical sliders suit sash windows and keep meeting rails aligned. Horizontal sliders suit wide windows. Hinged panels give full access for cleaning and escape. Lift-out and fixed panels suit windows that are rarely or never opened, and give the tightest seal for noise.
Do I need permission for secondary glazing on a listed building?
You should seek listed building consent from the council's planning department before installing secondary glazing on a listed building. Secondary glazing is often seen as a reversible, low-impact change, but consent requirements depend on the building. Carrying out works that need consent without it is a criminal offence. If your home is not listed but is in a conservation area, check with the council if you are unsure.
Do you cover Wells for secondary glazing?
Yes. We can quote for secondary glazing across Wells and the surrounding Somerset area, including postcode districts BA5, and nearby Shepton Mallet, Street and Frome. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Wells
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.