Wells · Somerset
Sash Windows in Wells
Period homes in Wells can keep the look of traditional sliding sashes while gaining double glazing, smoother running and stronger locks from our made-to-measure sash windows.
- BA5
- Guide from £1,495
Replacement sash windows for homes and businesses in Wells
Security on sash windows comes from keyed sash locks at the meeting rails, sash stops that limit the opening for ventilation and child safety, laminated glass, and close-fitting staff and parting beads. Ground-floor sashes in older houses are often the weakest point, so locks are worth upgrading during replacement.
A sliding sash only opens to about half its frame height, which can make an escape window harder to achieve. In England, Approved Document B guidance calls for at least 0.33 m² clear opening, 450mm high and wide, so tilt-in or side-hung escape sashes are sometimes specified for upper floors.
Many Victorian and Georgian sashes reach low to the floor. In England, Approved Document K treats glazing within 800mm of floor level as a critical location, so the lower panes of tall sash windows usually need toughened or laminated safety glass, which should be permanently marked.
Trickle vents can be fitted discreetly in the head of a sash frame or the top rail. In England, Approved Document F expects ventilation after window replacement to be no worse than before, although listed buildings and conservation areas may meet it only where reasonably practicable, agreed with building control.
Included as standard
- Weights or balances set for smooth, even sliding
- Survey recording mouldings, horns, bars and box condition
- Removal of old sashes or frames and disposal
- Made-to-measure timber or uPVC sash windows
About Wells for this job
- Postcodes covered
- BA5 and the surrounding area, including Shepton Mallet, Street and Frome
- Coast
- Wells is well inland, around 25 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Wells the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. Glazing bars and deep frames reduce daylight, so slimmer bars and high light-transmission low-E glass help north-facing rooms. Tall south-facing sashes can let in strong summer sun; the top sash can be lowered to vent warm air out at high level.
- Access and setting
- Older rural houses often have sash openings that are out of square, with soft stone or lime plaster around them, so each window is measured individually and fitted gently. Exposed sites benefit from draught seals and robust weatherboards on the bottom sash.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Wells
| Typical job | Guide price inc VAT |
|---|---|
| uPVC sliding sash, 900 × 1500 mm | £1,495 – £1,995 |
| Timber-effect uPVC sash, 900 × 1500 mm | £1,795 – £2,295 |
| Painted timber sash, 900 × 1500 mm | £2,595 – £3,295 |
Get a guide price for your size
Approved Document B covers escape windows. Where an existing window is an escape route, typically in first-floor bedrooms, its replacement should give at least the same escape opening as before.
Choosing your sash windows
Tilt-in sashes
Sashes that tilt inwards for cleaning upper-floor glass from inside, and can help provide an escape opening.
Timber box sash
Traditional weights, cords and pulleys in a box frame, made in engineered softwood or hardwood and factory painted to your colour.
Replacement sashes only
New double glazed sashes fitted into your existing sound box frame, keeping original linings, architraves and plasterwork.
Sash Windows in Wells: questions
How long does it take to replace sash windows?
Fitting a single sash window usually takes most of a day, longer where the box frame is removed or plaster disturbed. A whole house typically takes several days on site. The windows are made to order first, and timber sashes with special details take longer to manufacture; the lead time is confirmed in writing with your quote.
Can I have double glazed sash windows in a listed building?
Sometimes, but listed building consent is needed for significant works, and some councils will only accept repair of the original windows or slim double glazing with matching details. Secondary glazing is often accepted where new windows are not. Speak to your council's conservation officer before ordering; we can provide drawings and specifications to support an application.
How much do sash windows cost?
The cost of sash windows depends on size, material, whether you replace the whole frame or only the sashes, the glazing bar pattern, the glass and the finishing details such as horns and mouldings. Timber usually costs more than uPVC, and listed building work costs more again. See the guide prices for typical ranges; the written quote fixes your price.
Are uPVC sash windows allowed in conservation areas?
It depends on the council. Some conservation areas and Article 4 directions require timber on front elevations, while others accept well-detailed uPVC sashes with sculpted profiles and run-through horns. Listed buildings almost always need timber. Check your council's guidance or ask the planning department before choosing uPVC, because removing unauthorised windows later is costly.
Do you cover Wells for sash windows?
Yes. We can quote for sash windows across Wells and the surrounding Somerset area, including postcode districts BA5, and nearby Shepton Mallet, Street and Frome. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Wells
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.