Leatherhead · Surrey
Secondary Glazing in Leatherhead
Our surveyors can measure windows across Leatherhead for secondary glazing, checking reveal depth, opening style and fire escape needs before quoting.
- KT21
- KT22
- Guide from £465
About secondary glazing in Leatherhead
Glass for secondary glazing is heavy, so the frames need firm fixings into the reveal or a supporting sub-frame. The surveyor checks that plaster, timber linings and window boards are sound enough to carry the weight, and allows for any packing needed in uneven reveals.
Owners of listed buildings should seek listed building consent before installing secondary glazing, as the requirements depend on the building and the council. Secondary glazing is often seen as a minimal, reversible change, but carrying out works that need consent without it is a criminal offence.
Slim aluminium frames are designed to sit within the window reveal and line up with the original glazing bars or meeting rails. Matching sightlines keeps the secondary unit discreet from outside and inside, which matters for period homes and conservation areas.
Low-level secondary glazing is still glazing, so the safety glazing rules for critical locations apply. In England, Approved Document K treats glass within 800mm of the floor as a critical location, so low-level secondary panes should be toughened or laminated safety glass.
Included as standard
- Removal of packaging and cleaning of new glass
- Survey of each window, reveal depth and sightlines
- Fitting, sealing and checking every opening panel
- Written quote fixing the price for the specification
Working in Leatherhead
- Postcodes covered
- KT21, KT22 and the surrounding area, including Epsom, Ewell and Esher
- Coast
- Leatherhead is well inland, around 52 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Leatherhead the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. Secondary glazing adds an extra layer of glass, which slightly reduces daylight. Low-iron or clear low-E glass keeps light loss to a minimum, while on sunny elevations solar control glass can help reduce overheating in rooms with large windows.
- Access and setting
- Rural cottages and period homes often have single-glazed timber windows that cannot easily be replaced. Secondary glazing reduces draughts and heat loss in exposed locations, and the surveyor allows for uneven reveals and older plaster when fixing frames.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Leatherhead
| Typical job | Guide price inc VAT |
|---|---|
| Slider, 900 × 1200 mm | £465 – £595 |
| Slider, 1200 × 1600 mm | £665 – £845 |
| Acoustic glass, 1000 × 1400 mm | £675 – £865 |
Get a guide price for your size
Approved Document B covers escape windows. Where an existing window is an escape route, typically in first-floor bedrooms, its replacement should give at least the same escape opening as before.
Choosing your secondary glazing
Fixed panel
A non-opening unit for windows never opened, giving the most airtight seal for noise and draught reduction.
Lift-out panel
A lightweight panel that lifts out of its frame, for windows rarely opened, giving a slim and economical secondary unit.
Horizontal sliding
Panels slide sideways, suiting wide casement windows and openings where you need regular access for cleaning or ventilation.
Secondary Glazing in Leatherhead: questions
Will secondary glazing cause condensation?
It can, if the original window is sealed tighter than the secondary unit, because warm, moist room air then gets trapped in the cavity. The secondary unit should be the more airtight of the two, and the original window should not be fully sealed. Opening the secondary panel lets room air into the cavity, so close it again afterwards.
Is secondary glazing suitable for rented homes and flats?
Yes. Secondary glazing is fitted inside, so it often avoids the external changes that leases, freeholders or planning rules restrict. It can be removed later with limited making good. Leaseholders should still check their lease for any rules on internal alterations, and landlords should check escape routes are not affected.
How much noise does secondary glazing block?
Results depend on the size of the gap between the windows, the glass type and thickness, the seals and the original window. A larger cavity and acoustic laminated glass give the strongest improvement. The survey checks reveal depth and noise sources, so the specification can be tailored to the noise you are dealing with.
Can I still open my original windows?
Yes, as long as the secondary glazing has an opening panel in front of the part you need to open. Sliding and hinged panels give access to the original window for ventilation and cleaning. Lift-out and fixed panels suit windows you rarely or never open.
Do you cover Leatherhead for secondary glazing?
Yes. We can quote for secondary glazing across Leatherhead and the surrounding Surrey area, including postcode districts KT21 and KT22, and nearby Epsom, Ewell and Esher. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Leatherhead
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.