Leatherhead · Surrey
Shopfront Glazing in Leatherhead
From frameless glass entrances to traditional timber frontages, we can quote for shopfront glazing in Leatherhead that suits the building and the street.
- KT21
- KT22
- Guide from £375
About shop front glass replacement in Leatherhead
In England, works that materially affect the external appearance of a shopfront, such as a new frontage, new entrance doors or a changed layout, usually need planning permission. Reglazing a broken pane to match the existing does not change the appearance, but check with the local planning authority if unsure.
Under the Equality Act 2010 in England, Wales and Scotland, businesses serving the public must make reasonable adjustments, which can include physical changes such as a ramp where the only entrance is a step. Northern Ireland has its own disability discrimination law, so the duties there differ.
In England, large areas of clear glass in shopfronts and entrance screens that people could walk into need manifestation at two levels, 850–1000mm and 1400–1600mm above the floor. Logos, frosted bands or patterns can do the job if they contrast clearly with what is seen through the glass.
Manual entrance doors in buildings other than dwellings in England should open with no more than 30N of force at the door edge from closed to 30 degrees, then 22.5N from 30 to 60 degrees. Heavy doors and strong closers often fail this, so closers are chosen and adjusted to suit.
What you get
- Installation, sealing and adjustment of entrance doors
- Survey of the frontage, structure above and entrance layout
- Safety or security glass specified to suit the position
- Manifestation where required, final clean and handover
About Leatherhead for this job
- Postcodes covered
- KT21, KT22 and the surrounding area, including Epsom, Ewell and Esher
- Coast
- Leatherhead is well inland, around 52 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Leatherhead the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. South- and west-facing display windows can fade stock and overheat the shop in summer, while low winter sun causes glare that hides window displays. Solar control glass, window film and internal blinds can all help.
- Access and setting
- Market-town and village shops are often in older or listed buildings where timber shopfronts and traditional proportions are expected. Council design guidance and longer travel for large glass deliveries can both affect the timescale.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Leatherhead
| Typical job | Guide price inc VAT |
|---|---|
| Replace a laminated pane, 2000 × 2200 mm | £855 – £1,095 |
| Security laminated pane, 2000 × 2200 mm | £1,195 – £1,495 |
| Toughened door pane, 900 × 2000 mm | £375 – £485 |
Get a guide price for your size
Replacing windows and doors with similar ones is usually permitted development for houses in England. Flats, listed buildings and homes in conservation areas or covered by an Article 4 direction can need permission, so check with the council first.
What you can choose
Aluminium shopfront framing
Slim, powder-coated or anodised aluminium frames for display glass and doors, available in many colours and suited to most modern frontages.
Timber shopfront
Painted timber frames, stallrisers and doors in traditional proportions, often expected for listed buildings and conservation areas.
Toughened display glass
Toughened safety glass that breaks into small, blunt pieces, used for doors and low-level panes where impact safety is the main need.
Shopfront Glazing in Leatherhead: questions
What affects the cost of shopfront glazing?
The main cost drivers are the size and number of panes, the glass type and any security class, the frame material, the door type and ironmongery, and the access equipment needed to lift large panes. Automatic doors, bespoke shapes and out-of-hours working also add cost. See the guide prices, and your written quote fixes the price.
Does shop glass need markings on it?
Large areas of clear glass that people could walk into need markings. In England, the guidance for buildings other than dwellings puts manifestation at 850–1000mm and 1400–1600mm above the floor, and workplace rules across Great Britain require glass to be made apparent where needed for safety. Logos or frosted bands can meet this if they contrast clearly.
Do I need consent for new shop signs?
You may need advertisement consent from the planning authority. Many plain, non-illuminated fascia signs have deemed consent within set conditions, while illuminated signs and signs on listed buildings or in conservation areas more often need express consent. In England, displaying an advert without the consent it needs is a criminal offence, so check before ordering signage.
How long does a new shopfront take?
Replacing a single display pane can often be done in one visit once the glass is made. A complete new shopfront involves survey, any consents, manufacture of frames and glass, then installation, so allow several weeks or more overall. The fitting itself is usually short, and we board up where needed to keep the shop secure throughout.
Do you cover Leatherhead for shopfront glazing?
Yes. We can quote for shopfront glazing across Leatherhead and the surrounding Surrey area, including postcode districts KT21 and KT22, and nearby Epsom, Ewell and Esher. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Leatherhead
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.