Barnet · Greater London
Shopfront Glazing in Barnet
Taking on a new lease in Barnet? We can quote for a new shopfront and supply the drawings and specifications you may need for planning or advertisement consent.
- EN4
- EN5
- HA8
- N2
- N3
- N12
- Guide from £375
Barnet: aluminium shopfronts
New or changed signs may need advertisement consent from the local planning authority. Many plain, non-illuminated fascia signs have deemed consent subject to conditions, while illuminated signs more often need express consent. Displaying an advert without the consent it needs is a criminal offence in England.
For new buildings in England, access guidance gives a minimum effective clear width of 1000mm for external doors used by the general public, and 775mm where an existing building is being altered. Measuring the clear opening, not the door leaf, shows whether an entrance meets that figure.
Manual entrance doors in buildings other than dwellings in England should open with no more than 30N of force at the door edge from closed to 30 degrees, then 22.5N from 30 to 60 degrees. Heavy doors and strong closers often fail this, so closers are chosen and adjusted to suit.
In England, works that materially affect the external appearance of a shopfront, such as a new frontage, new entrance doors or a changed layout, usually need planning permission. Reglazing a broken pane to match the existing does not change the appearance, but check with the local planning authority if unsure.
What you get
- Survey of the frontage, structure above and entrance layout
- Aluminium or timber framing, doors and ironmongery as quoted
- Installation, sealing and adjustment of entrance doors
- Safety or security glass specified to suit the position
Barnet at a glance
- Postcodes covered
- EN4, EN5, HA8, N2, N3, N12, N20, NW4, NW7, NW11 and the surrounding area, including Potters Bar, Borehamwood and Finchley
- Coast
- Barnet is well inland, around 45 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Barnet the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. South- and west-facing display windows can fade stock and overheat the shop in summer, while low winter sun causes glare that hides window displays. Solar control glass, window film and internal blinds can all help.
- Access and setting
- Market-town and village shops are often in older or listed buildings where timber shopfronts and traditional proportions are expected. Council design guidance and longer travel for large glass deliveries can both affect the timescale.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Barnet
| Typical job | Guide price inc VAT |
|---|---|
| Replace a laminated pane, 2000 × 2200 mm | £855 – £1,095 |
| Security laminated pane, 2000 × 2200 mm | £1,195 – £1,495 |
| Toughened door pane, 900 × 2000 mm | £375 – £485 |
Get a guide price for your size
Approved Document Q applies to new homes in England, where doors and windows are expected to meet PAS 24 or an equivalent standard. It does not apply to replacements in existing homes, but PAS 24 products are still a sensible choice.
Specification choices
Timber shopfront
Painted timber frames, stallrisers and doors in traditional proportions, often expected for listed buildings and conservation areas.
Laminated security glass
Laminated glass classified under BS EN 356 that resists manual attack and stays in the frame when broken, keeping the shop secure.
Automatic entrance doors
Powered sliding or swing doors opened by sensor or push pad, making entry easier for wheelchair users, buggies and deliveries.
Shopfront Glazing in Barnet: questions
What type of glass should a shopfront have?
Shopfront glass must be safety glass wherever it sits in a critical location, such as doors, panels beside doors and low-level panes. Beyond that, laminated glass is often chosen for display windows because it stays in the frame when broken, keeping the premises secure. Higher-security laminated glass classified under BS EN 356 can be specified where risk is greater.
Do I need planning permission for a new shopfront?
In England, a new shopfront or alterations that materially change its appearance, such as new doors, a different layout or external shutters, usually need planning permission. Listed buildings also need listed building consent. Wales, Scotland and Northern Ireland have their own planning systems. We can provide drawings and specifications to support your application to the planning authority.
How wide should a shop entrance door be?
For new buildings in England, access guidance gives a minimum effective clear width of 1000mm for external doors used by the general public, and 775mm where an existing building is altered. The clear width is the usable opening with the door open, not the door size. Other UK nations publish their own guidance, so we confirm the applicable figure.
Do I need consent for new shop signs?
You may need advertisement consent from the planning authority. Many plain, non-illuminated fascia signs have deemed consent within set conditions, while illuminated signs and signs on listed buildings or in conservation areas more often need express consent. In England, displaying an advert without the consent it needs is a criminal offence, so check before ordering signage.
Do you cover Barnet for shopfront glazing?
Yes. We can quote for shopfront glazing across Barnet and the surrounding Greater London area, including postcode districts EN4, EN5, HA8, N2 and N3, and nearby Potters Bar, Borehamwood and Finchley. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Barnet
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.