Potters Bar · Hertfordshire
Shopfront Glazing in Potters Bar
Our glaziers fit shop windows and entrance doors in Potters Bar for retailers, cafés, salons and offices, planning the work to limit disruption to trading.
- EN6
- WD2
- WD23
- Guide from £375
Aluminium shopfronts for homes and businesses in Potters Bar
In England, large areas of clear glass in shopfronts and entrance screens that people could walk into need manifestation at two levels, 850–1000mm and 1400–1600mm above the floor. Logos, frosted bands or patterns can do the job if they contrast clearly with what is seen through the glass.
Some councils' shopfront guidance discourages solid external roller shutters and grilles, and in England external security measures that change the frontage's appearance usually need planning permission. Laminated security glass or internal open-mesh grilles are often considered as alternatives that keep the window display visible.
Under the Equality Act 2010 in England, Wales and Scotland, businesses serving the public must make reasonable adjustments, which can include physical changes such as a ramp where the only entrance is a step. Northern Ireland has its own disability discrimination law, so the duties there differ.
The same guidance in England asks for an accessible entrance to have a level threshold or, where a raised threshold cannot be avoided, one no more than 15mm high in total, with a level landing in front of the door at least 1500mm by 1500mm clear of the door swing.
What a typical job includes
- Aluminium or timber framing, doors and ironmongery as quoted
- Manifestation where required, final clean and handover
- Removal of old glazing and temporary boarding where needed
- Installation, sealing and adjustment of entrance doors
Potters Bar at a glance
- Postcodes covered
- EN6, WD2, WD23 and the surrounding area, including Barnet, Enfield and Borehamwood
- Coast
- Potters Bar is well inland, around 46 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Potters Bar the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. South- and west-facing display windows can fade stock and overheat the shop in summer, while low winter sun causes glare that hides window displays. Solar control glass, window film and internal blinds can all help.
- Access and setting
- Market-town and village shops are often in older or listed buildings where timber shopfronts and traditional proportions are expected. Council design guidance and longer travel for large glass deliveries can both affect the timescale.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Potters Bar
| Typical job | Guide price inc VAT |
|---|---|
| Replace a laminated pane, 2000 × 2200 mm | £855 – £1,095 |
| Security laminated pane, 2000 × 2200 mm | £1,195 – £1,495 |
| Toughened door pane, 900 × 2000 mm | £375 – £485 |
Get a guide price for your size
For shops and other non-domestic buildings in England, Approved Document M covers accessible entrances, and Approved Document K requires large areas of glass that people could walk into to carry manifestation (visible markings).
Options to choose between
Frameless glass entrance
Toughened glass doors on patch fittings and floor springs, giving an open, clear entrance between framed or frameless display screens.
Laminated security glass
Laminated glass classified under BS EN 356 that resists manual attack and stays in the frame when broken, keeping the shop secure.
Toughened display glass
Toughened safety glass that breaks into small, blunt pieces, used for doors and low-level panes where impact safety is the main need.
Shopfront Glazing in Potters Bar: questions
What type of glass should a shopfront have?
Shopfront glass must be safety glass wherever it sits in a critical location, such as doors, panels beside doors and low-level panes. Beyond that, laminated glass is often chosen for display windows because it stays in the frame when broken, keeping the premises secure. Higher-security laminated glass classified under BS EN 356 can be specified where risk is greater.
What affects the cost of shopfront glazing?
The main cost drivers are the size and number of panes, the glass type and any security class, the frame material, the door type and ironmongery, and the access equipment needed to lift large panes. Automatic doors, bespoke shapes and out-of-hours working also add cost. See the guide prices, and your written quote fixes the price.
Do I need consent for new shop signs?
You may need advertisement consent from the planning authority. Many plain, non-illuminated fascia signs have deemed consent within set conditions, while illuminated signs and signs on listed buildings or in conservation areas more often need express consent. In England, displaying an advert without the consent it needs is a criminal offence, so check before ordering signage.
Do I have to remove the step at my shop entrance?
Not automatically, but in England, Wales and Scotland the Equality Act 2010 requires service providers to make reasonable adjustments, which can include physical changes like a ramp or a level threshold. What is reasonable depends on the business and the building. When an entrance is replaced, building regulations on access also apply to the new work.
Do you cover Potters Bar for shopfront glazing?
Yes. We can quote for shopfront glazing across Potters Bar and the surrounding Hertfordshire area, including postcode districts EN6, WD2 and WD23, and nearby Barnet, Enfield and Borehamwood. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Potters Bar
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.