Fleet · Hampshire
Shopfront Glazing in Fleet
Is a cracked display window holding back your shop in Fleet? Our glaziers can survey the frontage and quote for safety or laminated security glass made to fit.
- GU13
- GU51
- GU52
- Guide from £375
Aluminium shopfronts in Fleet: what to know
New or changed signs may need advertisement consent from the local planning authority. Many plain, non-illuminated fascia signs have deemed consent subject to conditions, while illuminated signs more often need express consent. Displaying an advert without the consent it needs is a criminal offence in England.
Laminated glass holds together when broken because the layers are bonded to a plastic interlayer, so a smashed display pane usually stays in its frame until it is replaced. Toughened glass breaks into small pieces and leaves an open hole, which is why laminated glass is often chosen for street-level shop windows.
Under the Equality Act 2010 in England, Wales and Scotland, businesses serving the public must make reasonable adjustments, which can include physical changes such as a ramp where the only entrance is a step. Northern Ireland has its own disability discrimination law, so the duties there differ.
Manual entrance doors in buildings other than dwellings in England should open with no more than 30N of force at the door edge from closed to 30 degrees, then 22.5N from 30 to 60 degrees. Heavy doors and strong closers often fail this, so closers are chosen and adjusted to suit.
What you get
- Installation, sealing and adjustment of entrance doors
- Removal of old glazing and temporary boarding where needed
- Aluminium or timber framing, doors and ironmongery as quoted
- Survey of the frontage, structure above and entrance layout
Fleet at a glance
- Postcodes covered
- GU13, GU51, GU52 and the surrounding area, including Farnborough, Aldershot and Yateley
- Coast
- Fleet is well inland, around 49 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Fleet the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. South- and west-facing display windows can fade stock and overheat the shop in summer, while low winter sun causes glare that hides window displays. Solar control glass, window film and internal blinds can all help.
- Access and setting
- Market-town and village shops are often in older or listed buildings where timber shopfronts and traditional proportions are expected. Council design guidance and longer travel for large glass deliveries can both affect the timescale.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Fleet
| Typical job | Guide price inc VAT |
|---|---|
| Replace a laminated pane, 2000 × 2200 mm | £855 – £1,095 |
| Security laminated pane, 2000 × 2200 mm | £1,195 – £1,495 |
| Toughened door pane, 900 × 2000 mm | £375 – £485 |
Get a guide price for your size
Approved Document Q applies to new homes in England, where doors and windows are expected to meet PAS 24 or an equivalent standard. It does not apply to replacements in existing homes, but PAS 24 products are still a sensible choice.
Specification choices
Aluminium shopfront framing
Slim, powder-coated or anodised aluminium frames for display glass and doors, available in many colours and suited to most modern frontages.
Automatic entrance doors
Powered sliding or swing doors opened by sensor or push pad, making entry easier for wheelchair users, buggies and deliveries.
Insulated glass units
Sealed double-glazed units in the shopfront frames, reducing heat loss and condensation compared with single sheets of display glass.
Shopfront Glazing in Fleet: questions
How long does a new shopfront take?
Replacing a single display pane can often be done in one visit once the glass is made. A complete new shopfront involves survey, any consents, manufacture of frames and glass, then installation, so allow several weeks or more overall. The fitting itself is usually short, and we board up where needed to keep the shop secure throughout.
Do I need planning permission for a new shopfront?
In England, a new shopfront or alterations that materially change its appearance, such as new doors, a different layout or external shutters, usually need planning permission. Listed buildings also need listed building consent. Wales, Scotland and Northern Ireland have their own planning systems. We can provide drawings and specifications to support your application to the planning authority.
Can my shop stay open while the shopfront is replaced?
Often, yes, at least in part. Work can be phased so one section is replaced while the entrance stays usable, or carried out early, late or on closing days where access and noise rules allow. Temporary boarding keeps the premises secure between stages. We agree the programme with you before work starts so trading disruption is planned.
What affects the cost of shopfront glazing?
The main cost drivers are the size and number of panes, the glass type and any security class, the frame material, the door type and ironmongery, and the access equipment needed to lift large panes. Automatic doors, bespoke shapes and out-of-hours working also add cost. See the guide prices, and your written quote fixes the price.
Do you cover Fleet for shopfront glazing?
Yes. We can quote for shopfront glazing across Fleet and the surrounding Hampshire area, including postcode districts GU13, GU51 and GU52, and nearby Farnborough, Aldershot and Yateley. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Fleet
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.